Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.2.1
Copy Link

Configure IPv6 static routing tables.

  config router static6
      Description: Configure IPv6 static routing tables.
      edit <seq-num>
          set status [enable|disable]
          set dst {ipv6-network}
          set gateway {ipv6-address}
          set device {string}
          set devindex {integer}
          set distance {integer}
          set priority {integer}
          set comment {var-string}
          set blackhole [enable|disable]
          set virtual-wan-link [enable|disable]
          set link-monitor-exempt [enable|disable]
          set bfd [enable|disable]
      next
  end

config router static6

Parameter Name Description Type Size
status Enable/disable this static route.
enable: Enable static route.
disable: Disable static route.
option -
dst Destination IPv6 prefix. ipv6-network Not Specified
gateway IPv6 address of the gateway. ipv6-address Not Specified
device Gateway out interface or tunnel. string Maximum length: 35
devindex Device index (0 - 4294967295). integer Minimum value: 0 Maximum value: 4294967295
distance Administrative distance (1 - 255). integer Minimum value: 1 Maximum value: 255
priority Administrative priority (0 - 4294967295). integer Minimum value: 0 Maximum value: 4294967295
comment Optional comments. var-string Maximum length: 255
blackhole Enable/disable black hole.
enable: Enable black hole.
disable: Disable black hole.
option -
virtual-wan-link Enable/disable egress through the virtual-wan-link.
enable: Enable setting.
disable: Disable setting.
option -
link-monitor-exempt Enable/disable withdrawal of this static route when link monitor or health check is down.
enable: Enable withdrawal of this static route when link monitor or health check is down.
disable: Disable withdrawal of this static route when link monitor or health check is down.
option -
bfd Enable/disable Bidirectional Forwarding Detection (BFD).
enable: Enable Bidirectional Forwarding Detection (BFD).
disable: Disable Bidirectional Forwarding Detection (BFD).
option -

Configure IPv6 static routing tables.

  config router static6
      Description: Configure IPv6 static routing tables.
      edit <seq-num>
          set status [enable|disable]
          set dst {ipv6-network}
          set gateway {ipv6-address}
          set device {string}
          set devindex {integer}
          set distance {integer}
          set priority {integer}
          set comment {var-string}
          set blackhole [enable|disable]
          set virtual-wan-link [enable|disable]
          set link-monitor-exempt [enable|disable]
          set bfd [enable|disable]
      next
  end

config router static6

Parameter Name Description Type Size
status Enable/disable this static route.
enable: Enable static route.
disable: Disable static route.
option -
dst Destination IPv6 prefix. ipv6-network Not Specified
gateway IPv6 address of the gateway. ipv6-address Not Specified
device Gateway out interface or tunnel. string Maximum length: 35
devindex Device index (0 - 4294967295). integer Minimum value: 0 Maximum value: 4294967295
distance Administrative distance (1 - 255). integer Minimum value: 1 Maximum value: 255
priority Administrative priority (0 - 4294967295). integer Minimum value: 0 Maximum value: 4294967295
comment Optional comments. var-string Maximum length: 255
blackhole Enable/disable black hole.
enable: Enable black hole.
disable: Disable black hole.
option -
virtual-wan-link Enable/disable egress through the virtual-wan-link.
enable: Enable setting.
disable: Disable setting.
option -
link-monitor-exempt Enable/disable withdrawal of this static route when link monitor or health check is down.
enable: Enable withdrawal of this static route when link monitor or health check is down.
disable: Disable withdrawal of this static route when link monitor or health check is down.
option -
bfd Enable/disable Bidirectional Forwarding Detection (BFD).
enable: Enable Bidirectional Forwarding Detection (BFD).
disable: Disable Bidirectional Forwarding Detection (BFD).
option -