Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.2.1
Copy Link

Configure firewall IP-translation.

  config firewall ip-translation
      Description: Configure firewall IP-translation.
      edit <transid>
          set type {option}
          set startip {ipv4-address-any}
          set endip {ipv4-address-any}
          set map-startip {ipv4-address-any}
      next
  end

config firewall ip-translation

Parameter Name Description Type Size
type IP translation type (option: SCTP).
SCTP: SCTP
option -
startip First IPv4 address (inclusive) in the range of the addresses to be translated (format xxx.xxx.xxx.xxx, default: 0.0.0.0). ipv4-address-any Not Specified
endip Final IPv4 address (inclusive) in the range of the addresses to be translated (format xxx.xxx.xxx.xxx, default: 0.0.0.0). ipv4-address-any Not Specified
map-startip Address to be used as the starting point for translation in the range (format xxx.xxx.xxx.xxx, default: 0.0.0.0). ipv4-address-any Not Specified

Configure firewall IP-translation.

  config firewall ip-translation
      Description: Configure firewall IP-translation.
      edit <transid>
          set type {option}
          set startip {ipv4-address-any}
          set endip {ipv4-address-any}
          set map-startip {ipv4-address-any}
      next
  end

config firewall ip-translation

Parameter Name Description Type Size
type IP translation type (option: SCTP).
SCTP: SCTP
option -
startip First IPv4 address (inclusive) in the range of the addresses to be translated (format xxx.xxx.xxx.xxx, default: 0.0.0.0). ipv4-address-any Not Specified
endip Final IPv4 address (inclusive) in the range of the addresses to be translated (format xxx.xxx.xxx.xxx, default: 0.0.0.0). ipv4-address-any Not Specified
map-startip Address to be used as the starting point for translation in the range (format xxx.xxx.xxx.xxx, default: 0.0.0.0). ipv4-address-any Not Specified