Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.2.1
Copy Link

Configure IS-IS.

  config router isis
      Description: Configure IS-IS.
      set is-type [level-1-2|level-1|...]
      set adv-passive-only [enable|disable]
      set adv-passive-only6 [enable|disable]
      set auth-mode-l1 [password|md5]
      set auth-mode-l2 [password|md5]
      set auth-password-l1 {password}
      set auth-password-l2 {password}
      set auth-keychain-l1 {string}
      set auth-keychain-l2 {string}
      set auth-sendonly-l1 [enable|disable]
      set auth-sendonly-l2 [enable|disable]
      set ignore-lsp-errors [enable|disable]
      set lsp-gen-interval-l1 {integer}
      set lsp-gen-interval-l2 {integer}
      set lsp-refresh-interval {integer}
      set max-lsp-lifetime {integer}
      set spf-interval-exp-l1 {user}
      set spf-interval-exp-l2 {user}
      set dynamic-hostname [enable|disable]
      set adjacency-check [enable|disable]
      set adjacency-check6 [enable|disable]
      set overload-bit [enable|disable]
      set overload-bit-suppress {option1}, {option2}, ...
      set overload-bit-on-startup {integer}
      set default-originate [enable|disable]
      set default-originate6 [enable|disable]
      set metric-style [narrow|wide|...]
      set redistribute-l1 [enable|disable]
      set redistribute-l1-list {string}
      set redistribute-l2 [enable|disable]
      set redistribute-l2-list {string}
      set redistribute6-l1 [enable|disable]
      set redistribute6-l1-list {string}
      set redistribute6-l2 [enable|disable]
      set redistribute6-l2-list {string}
      config isis-net
          Description: IS-IS net configuration.
          edit <id>
              set net {user}
          next
      end
      config isis-interface
          Description: IS-IS interface configuration.
          edit <name>
              set status [enable|disable]
              set status6 [enable|disable]
              set network-type [broadcast|point-to-point|...]
              set circuit-type [level-1-2|level-1|...]
              set csnp-interval-l1 {integer}
              set csnp-interval-l2 {integer}
              set hello-interval-l1 {integer}
              set hello-interval-l2 {integer}
              set hello-multiplier-l1 {integer}
              set hello-multiplier-l2 {integer}
              set hello-padding [enable|disable]
              set lsp-interval {integer}
              set lsp-retransmit-interval {integer}
              set metric-l1 {integer}
              set metric-l2 {integer}
              set wide-metric-l1 {integer}
              set wide-metric-l2 {integer}
              set auth-password-l1 {password}
              set auth-password-l2 {password}
              set auth-keychain-l1 {string}
              set auth-keychain-l2 {string}
              set auth-send-only-l1 [enable|disable]
              set auth-send-only-l2 [enable|disable]
              set auth-mode-l1 [md5|password]
              set auth-mode-l2 [md5|password]
              set priority-l1 {integer}
              set priority-l2 {integer}
              set mesh-group [enable|disable]
              set mesh-group-id {integer}
          next
      end
      config summary-address
          Description: IS-IS summary addresses.
          edit <id>
              set prefix {ipv4-classnet-any}
              set level [level-1-2|level-1|...]
          next
      end
      config summary-address6
          Description: IS-IS IPv6 summary address.
          edit <id>
              set prefix6 {ipv6-prefix}
              set level [level-1-2|level-1|...]
          next
      end
      config redistribute
          Description: IS-IS redistribute protocols.
          edit <protocol>
              set status [enable|disable]
              set metric {integer}
              set metric-type [external|internal]
              set level [level-1-2|level-1|...]
              set routemap {string}
          next
      end
      config redistribute6
          Description: IS-IS IPv6 redistribution for routing protocols.
          edit <protocol>
              set status [enable|disable]
              set metric {integer}
              set metric-type [external|internal]
              set level [level-1-2|level-1|...]
              set routemap {string}
          next
      end
  end

config router isis

Parameter Name Description Type Size
is-type IS type.
level-1-2: Level 1 and 2.
level-1: Level 1 only.
level-2-only: Level 2 only.
option -
adv-passive-only Enable/disable IS-IS advertisement of passive interfaces only.
enable: Advertise passive interfaces only.
disable: Advertise all IS-IS enabled interfaces.
option -
adv-passive-only6 Enable/disable IPv6 IS-IS advertisement of passive interfaces only.
enable: Advertise passive interfaces only.
disable: Advertise all IS-IS enabled interfaces.
option -
auth-mode-l1 Level 1 authentication mode.
password: Password.
md5: MD5.
option -
auth-mode-l2 Level 2 authentication mode.
password: Password.
md5: MD5.
option -
auth-password-l1 Authentication password for level 1 PDUs. password Not Specified
auth-password-l2 Authentication password for level 2 PDUs. password Not Specified
auth-keychain-l1 Authentication key-chain for level 1 PDUs. string Maximum length: 35
auth-keychain-l2 Authentication key-chain for level 2 PDUs. string Maximum length: 35
auth-sendonly-l1 Enable/disable level 1 authentication send-only.
enable: Enable level 1 authentication send-only.
disable: Disable level 1 authentication send-only.
option -
auth-sendonly-l2 Enable/disable level 2 authentication send-only.
enable: Enable level 2 authentication send-only.
disable: Disable level 2 authentication send-only.
option -
ignore-lsp-errors Enable/disable ignoring of LSP errors with bad checksums.
enable: Enable ignoring of LSP errors with bad checksums.
disable: Disable ignoring of LSP errors with bad checksums.
option -
lsp-gen-interval-l1 Minimum interval for level 1 LSP regenerating. integer Minimum value: 1 Maximum value: 120
lsp-gen-interval-l2 Minimum interval for level 2 LSP regenerating. integer Minimum value: 1 Maximum value: 120
lsp-refresh-interval LSP refresh time in seconds. integer Minimum value: 1 Maximum value: 65535
max-lsp-lifetime Maximum LSP lifetime in seconds. integer Minimum value: 350 Maximum value: 65535
spf-interval-exp-l1 Level 1 SPF calculation delay. user Not Specified
spf-interval-exp-l2 Level 2 SPF calculation delay. user Not Specified
dynamic-hostname Enable/disable dynamic hostname.
enable: Enable dynamic hostname.
disable: Disable dynamic hostname.
option -
adjacency-check Enable/disable adjacency check.
enable: Enable adjacency check.
disable: Disable adjacency check.
option -
adjacency-check6 Enable/disable IPv6 adjacency check.
enable: Enable IPv6 adjacency check.
disable: Disable IPv6 adjacency check.
option -
overload-bit Enable/disable signal other routers not to use us in SPF.
enable: Enable overload bit.
disable: Disable overload bit.
option -
overload-bit-suppress Suppress overload-bit for the specific prefixes.
external: External.
interlevel: Inter-level.
option -
overload-bit-on-startup Overload-bit only temporarily after reboot. integer Minimum value: 5 Maximum value: 86400
default-originate Enable/disable distribution of default route information.
enable: Enable distribution of default route information.
disable: Disable distribution of default route information.
option -
default-originate6 Enable/disable distribution of default IPv6 route information.
enable: Enable distribution of default IPv6 route information.
disable: Disable distribution of default IPv6 route information.
option -
metric-style Use old-style (ISO 10589) or new-style packet formats
narrow: Use old style of TLVs with narrow metric.
wide: Use new style of TLVs to carry wider metric.
transition: Send and accept both styles of TLVs during transition.
narrow-transition: Narrow and accept both styles of TLVs during transition.
narrow-transition-l1: Narrow-transition level-1 only.
narrow-transition-l2: Narrow-transition level-2 only.
wide-l1: Wide level-1 only.
wide-l2: Wide level-2 only.
wide-transition: Wide and accept both styles of TLVs during transition.
wide-transition-l1: Wide-transition level-1 only.
wide-transition-l2: Wide-transition level-2 only.
transition-l1: Transition level-1 only.
transition-l2: Transition level-2 only.
option -
redistribute-l1 Enable/disable redistribution of level 1 routes into level 2.
enable: Enable redistribution of level 1 routes into level 2.
disable: Disable redistribution of level 1 routes into level 2.
option -
redistribute-l1-list Access-list for route redistribution from l1 to l2. string Maximum length: 35
redistribute-l2 Enable/disable redistribution of level 2 routes into level 1.
enable: Enable redistribution of level 2 routes into level 1.
disable: Disable redistribution of level 2 routes into level 1.
option -
redistribute-l2-list Access-list for route redistribution from l2 to l1. string Maximum length: 35
redistribute6-l1 Enable/disable redistribution of level 1 IPv6 routes into level 2.
enable: Enable redistribution of level 1 IPv6 routes into level 2.
disable: Disable redistribution of level 1 IPv6 routes into level 2.
option -
redistribute6-l1-list Access-list for IPv6 route redistribution from l1 to l2. string Maximum length: 35
redistribute6-l2 Enable/disable redistribution of level 2 IPv6 routes into level 1.
enable: Enable redistribution of level 2 IPv6 routes into level 1.
disable: Disable redistribution of level 2 IPv6 routes into level 1.
option -
redistribute6-l2-list Access-list for IPv6 route redistribution from l2 to l1. string Maximum length: 35
Parameter Name Description Type Size
net IS-IS net xx.xxxx. ... .xxxx.xx. user Not Specified
Parameter Name Description Type Size
status Enable/disable interface for IS-IS.
enable: Enable interface for IS-IS.
disable: Disable interface for IS-IS.
option -
status6 Enable/disable IPv6 interface for IS-IS.
enable: Enable IPv6 interface for IS-IS.
disable: Disable IPv6 interface for IS-IS.
option -
network-type IS-IS interface's network type
broadcast: Broadcast.
point-to-point: Point-to-point.
loopback: Loopback.
option -
circuit-type IS-IS interface's circuit type
level-1-2: Level 1 and 2.
level-1: Level 1.
level-2: Level 2.
option -
csnp-interval-l1 Level 1 CSNP interval. integer Minimum value: 1 Maximum value: 65535
csnp-interval-l2 Level 2 CSNP interval. integer Minimum value: 1 Maximum value: 65535
hello-interval-l1 Level 1 hello interval. integer Minimum value: 0 Maximum value: 65535
hello-interval-l2 Level 2 hello interval. integer Minimum value: 0 Maximum value: 65535
hello-multiplier-l1 Level 1 multiplier for Hello holding time. integer Minimum value: 2 Maximum value: 100
hello-multiplier-l2 Level 2 multiplier for Hello holding time. integer Minimum value: 2 Maximum value: 100
hello-padding Enable/disable padding to IS-IS hello packets.
enable: Enable padding to IS-IS hello packets.
disable: Disable padding to IS-IS hello packets.
option -
lsp-interval LSP transmission interval (milliseconds). integer Minimum value: 1 Maximum value: 4294967295
lsp-retransmit-interval LSP retransmission interval (sec). integer Minimum value: 1 Maximum value: 65535
metric-l1 Level 1 metric for interface. integer Minimum value: 1 Maximum value: 63
metric-l2 Level 2 metric for interface. integer Minimum value: 1 Maximum value: 63
wide-metric-l1 Level 1 wide metric for interface. integer Minimum value: 1 Maximum value: 16777214
wide-metric-l2 Level 2 wide metric for interface. integer Minimum value: 1 Maximum value: 16777214
auth-password-l1 Authentication password for level 1 PDUs. password Not Specified
auth-password-l2 Authentication password for level 2 PDUs. password Not Specified
auth-keychain-l1 Authentication key-chain for level 1 PDUs. string Maximum length: 35
auth-keychain-l2 Authentication key-chain for level 2 PDUs. string Maximum length: 35
auth-send-only-l1 Enable/disable authentication send-only for level 1 PDUs.
enable: Enable authentication send-only for level 1 PDUs.
disable: Disable authentication send-only for level 1 PDUs.
option -
auth-send-only-l2 Enable/disable authentication send-only for level 2 PDUs.
enable: Enable authentication send-only for level 2 PDUs.
disable: Disable authentication send-only for level 2 PDUs.
option -
auth-mode-l1 Level 1 authentication mode.
md5: MD5.
password: Password.
option -
auth-mode-l2 Level 2 authentication mode.
md5: MD5.
password: Password.
option -
priority-l1 Level 1 priority. integer Minimum value: 0 Maximum value: 127
priority-l2 Level 2 priority. integer Minimum value: 0 Maximum value: 127
mesh-group Enable/disable IS-IS mesh group.
enable: Enable IS-IS mesh group.
disable: Disable IS-IS mesh group.
option -
mesh-group-id Mesh group ID , 0: mesh-group blocked. integer Minimum value: 0 Maximum value: 4294967295
Parameter Name Description Type Size
prefix Prefix. ipv4-classnet-any Not Specified
level Level.
level-1-2: Level 1 and 2.
level-1: Level 1.
level-2: Level 2.
option -
Parameter Name Description Type Size
prefix6 IPv6 prefix. ipv6-prefix Not Specified
level Level.
level-1-2: Level 1 and 2.
level-1: Level 1.
level-2: Level 2.
option -
Parameter Name Description Type Size
status Status.
enable: Enable.
disable: Disable.
option -
metric Metric. integer Minimum value: 0 Maximum value: 4261412864
metric-type Metric type.
external: External.
internal: Internal.
option -
level Level.
level-1-2: Level 1 and 2.
level-1: Level 1.
level-2: Level 2.
option -
routemap Route map name. string Maximum length: 35
Parameter Name Description Type Size
status Enable/disable redistribution.
enable: Enable redistribution.
disable: Disable redistribution.
option -
metric Metric. integer Minimum value: 0 Maximum value: 4261412864
metric-type Metric type.
external: External metric type.
internal: Internal metric type.
option -
level Level.
level-1-2: Level 1 and 2.
level-1: Level 1.
level-2: Level 2.
option -
routemap Route map name. string Maximum length: 35

Configure IS-IS.

  config router isis
      Description: Configure IS-IS.
      set is-type [level-1-2|level-1|...]
      set adv-passive-only [enable|disable]
      set adv-passive-only6 [enable|disable]
      set auth-mode-l1 [password|md5]
      set auth-mode-l2 [password|md5]
      set auth-password-l1 {password}
      set auth-password-l2 {password}
      set auth-keychain-l1 {string}
      set auth-keychain-l2 {string}
      set auth-sendonly-l1 [enable|disable]
      set auth-sendonly-l2 [enable|disable]
      set ignore-lsp-errors [enable|disable]
      set lsp-gen-interval-l1 {integer}
      set lsp-gen-interval-l2 {integer}
      set lsp-refresh-interval {integer}
      set max-lsp-lifetime {integer}
      set spf-interval-exp-l1 {user}
      set spf-interval-exp-l2 {user}
      set dynamic-hostname [enable|disable]
      set adjacency-check [enable|disable]
      set adjacency-check6 [enable|disable]
      set overload-bit [enable|disable]
      set overload-bit-suppress {option1}, {option2}, ...
      set overload-bit-on-startup {integer}
      set default-originate [enable|disable]
      set default-originate6 [enable|disable]
      set metric-style [narrow|wide|...]
      set redistribute-l1 [enable|disable]
      set redistribute-l1-list {string}
      set redistribute-l2 [enable|disable]
      set redistribute-l2-list {string}
      set redistribute6-l1 [enable|disable]
      set redistribute6-l1-list {string}
      set redistribute6-l2 [enable|disable]
      set redistribute6-l2-list {string}
      config isis-net
          Description: IS-IS net configuration.
          edit <id>
              set net {user}
          next
      end
      config isis-interface
          Description: IS-IS interface configuration.
          edit <name>
              set status [enable|disable]
              set status6 [enable|disable]
              set network-type [broadcast|point-to-point|...]
              set circuit-type [level-1-2|level-1|...]
              set csnp-interval-l1 {integer}
              set csnp-interval-l2 {integer}
              set hello-interval-l1 {integer}
              set hello-interval-l2 {integer}
              set hello-multiplier-l1 {integer}
              set hello-multiplier-l2 {integer}
              set hello-padding [enable|disable]
              set lsp-interval {integer}
              set lsp-retransmit-interval {integer}
              set metric-l1 {integer}
              set metric-l2 {integer}
              set wide-metric-l1 {integer}
              set wide-metric-l2 {integer}
              set auth-password-l1 {password}
              set auth-password-l2 {password}
              set auth-keychain-l1 {string}
              set auth-keychain-l2 {string}
              set auth-send-only-l1 [enable|disable]
              set auth-send-only-l2 [enable|disable]
              set auth-mode-l1 [md5|password]
              set auth-mode-l2 [md5|password]
              set priority-l1 {integer}
              set priority-l2 {integer}
              set mesh-group [enable|disable]
              set mesh-group-id {integer}
          next
      end
      config summary-address
          Description: IS-IS summary addresses.
          edit <id>
              set prefix {ipv4-classnet-any}
              set level [level-1-2|level-1|...]
          next
      end
      config summary-address6
          Description: IS-IS IPv6 summary address.
          edit <id>
              set prefix6 {ipv6-prefix}
              set level [level-1-2|level-1|...]
          next
      end
      config redistribute
          Description: IS-IS redistribute protocols.
          edit <protocol>
              set status [enable|disable]
              set metric {integer}
              set metric-type [external|internal]
              set level [level-1-2|level-1|...]
              set routemap {string}
          next
      end
      config redistribute6
          Description: IS-IS IPv6 redistribution for routing protocols.
          edit <protocol>
              set status [enable|disable]
              set metric {integer}
              set metric-type [external|internal]
              set level [level-1-2|level-1|...]
              set routemap {string}
          next
      end
  end

config router isis

Parameter Name Description Type Size
is-type IS type.
level-1-2: Level 1 and 2.
level-1: Level 1 only.
level-2-only: Level 2 only.
option -
adv-passive-only Enable/disable IS-IS advertisement of passive interfaces only.
enable: Advertise passive interfaces only.
disable: Advertise all IS-IS enabled interfaces.
option -
adv-passive-only6 Enable/disable IPv6 IS-IS advertisement of passive interfaces only.
enable: Advertise passive interfaces only.
disable: Advertise all IS-IS enabled interfaces.
option -
auth-mode-l1 Level 1 authentication mode.
password: Password.
md5: MD5.
option -
auth-mode-l2 Level 2 authentication mode.
password: Password.
md5: MD5.
option -
auth-password-l1 Authentication password for level 1 PDUs. password Not Specified
auth-password-l2 Authentication password for level 2 PDUs. password Not Specified
auth-keychain-l1 Authentication key-chain for level 1 PDUs. string Maximum length: 35
auth-keychain-l2 Authentication key-chain for level 2 PDUs. string Maximum length: 35
auth-sendonly-l1 Enable/disable level 1 authentication send-only.
enable: Enable level 1 authentication send-only.
disable: Disable level 1 authentication send-only.
option -
auth-sendonly-l2 Enable/disable level 2 authentication send-only.
enable: Enable level 2 authentication send-only.
disable: Disable level 2 authentication send-only.
option -
ignore-lsp-errors Enable/disable ignoring of LSP errors with bad checksums.
enable: Enable ignoring of LSP errors with bad checksums.
disable: Disable ignoring of LSP errors with bad checksums.
option -
lsp-gen-interval-l1 Minimum interval for level 1 LSP regenerating. integer Minimum value: 1 Maximum value: 120
lsp-gen-interval-l2 Minimum interval for level 2 LSP regenerating. integer Minimum value: 1 Maximum value: 120
lsp-refresh-interval LSP refresh time in seconds. integer Minimum value: 1 Maximum value: 65535
max-lsp-lifetime Maximum LSP lifetime in seconds. integer Minimum value: 350 Maximum value: 65535
spf-interval-exp-l1 Level 1 SPF calculation delay. user Not Specified
spf-interval-exp-l2 Level 2 SPF calculation delay. user Not Specified
dynamic-hostname Enable/disable dynamic hostname.
enable: Enable dynamic hostname.
disable: Disable dynamic hostname.
option -
adjacency-check Enable/disable adjacency check.
enable: Enable adjacency check.
disable: Disable adjacency check.
option -
adjacency-check6 Enable/disable IPv6 adjacency check.
enable: Enable IPv6 adjacency check.
disable: Disable IPv6 adjacency check.
option -
overload-bit Enable/disable signal other routers not to use us in SPF.
enable: Enable overload bit.
disable: Disable overload bit.
option -
overload-bit-suppress Suppress overload-bit for the specific prefixes.
external: External.
interlevel: Inter-level.
option -
overload-bit-on-startup Overload-bit only temporarily after reboot. integer Minimum value: 5 Maximum value: 86400
default-originate Enable/disable distribution of default route information.
enable: Enable distribution of default route information.
disable: Disable distribution of default route information.
option -
default-originate6 Enable/disable distribution of default IPv6 route information.
enable: Enable distribution of default IPv6 route information.
disable: Disable distribution of default IPv6 route information.
option -
metric-style Use old-style (ISO 10589) or new-style packet formats
narrow: Use old style of TLVs with narrow metric.
wide: Use new style of TLVs to carry wider metric.
transition: Send and accept both styles of TLVs during transition.
narrow-transition: Narrow and accept both styles of TLVs during transition.
narrow-transition-l1: Narrow-transition level-1 only.
narrow-transition-l2: Narrow-transition level-2 only.
wide-l1: Wide level-1 only.
wide-l2: Wide level-2 only.
wide-transition: Wide and accept both styles of TLVs during transition.
wide-transition-l1: Wide-transition level-1 only.
wide-transition-l2: Wide-transition level-2 only.
transition-l1: Transition level-1 only.
transition-l2: Transition level-2 only.
option -
redistribute-l1 Enable/disable redistribution of level 1 routes into level 2.
enable: Enable redistribution of level 1 routes into level 2.
disable: Disable redistribution of level 1 routes into level 2.
option -
redistribute-l1-list Access-list for route redistribution from l1 to l2. string Maximum length: 35
redistribute-l2 Enable/disable redistribution of level 2 routes into level 1.
enable: Enable redistribution of level 2 routes into level 1.
disable: Disable redistribution of level 2 routes into level 1.
option -
redistribute-l2-list Access-list for route redistribution from l2 to l1. string Maximum length: 35
redistribute6-l1 Enable/disable redistribution of level 1 IPv6 routes into level 2.
enable: Enable redistribution of level 1 IPv6 routes into level 2.
disable: Disable redistribution of level 1 IPv6 routes into level 2.
option -
redistribute6-l1-list Access-list for IPv6 route redistribution from l1 to l2. string Maximum length: 35
redistribute6-l2 Enable/disable redistribution of level 2 IPv6 routes into level 1.
enable: Enable redistribution of level 2 IPv6 routes into level 1.
disable: Disable redistribution of level 2 IPv6 routes into level 1.
option -
redistribute6-l2-list Access-list for IPv6 route redistribution from l2 to l1. string Maximum length: 35
Parameter Name Description Type Size
net IS-IS net xx.xxxx. ... .xxxx.xx. user Not Specified
Parameter Name Description Type Size
status Enable/disable interface for IS-IS.
enable: Enable interface for IS-IS.
disable: Disable interface for IS-IS.
option -
status6 Enable/disable IPv6 interface for IS-IS.
enable: Enable IPv6 interface for IS-IS.
disable: Disable IPv6 interface for IS-IS.
option -
network-type IS-IS interface's network type
broadcast: Broadcast.
point-to-point: Point-to-point.
loopback: Loopback.
option -
circuit-type IS-IS interface's circuit type
level-1-2: Level 1 and 2.
level-1: Level 1.
level-2: Level 2.
option -
csnp-interval-l1 Level 1 CSNP interval. integer Minimum value: 1 Maximum value: 65535
csnp-interval-l2 Level 2 CSNP interval. integer Minimum value: 1 Maximum value: 65535
hello-interval-l1 Level 1 hello interval. integer Minimum value: 0 Maximum value: 65535
hello-interval-l2 Level 2 hello interval. integer Minimum value: 0 Maximum value: 65535
hello-multiplier-l1 Level 1 multiplier for Hello holding time. integer Minimum value: 2 Maximum value: 100
hello-multiplier-l2 Level 2 multiplier for Hello holding time. integer Minimum value: 2 Maximum value: 100
hello-padding Enable/disable padding to IS-IS hello packets.
enable: Enable padding to IS-IS hello packets.
disable: Disable padding to IS-IS hello packets.
option -
lsp-interval LSP transmission interval (milliseconds). integer Minimum value: 1 Maximum value: 4294967295
lsp-retransmit-interval LSP retransmission interval (sec). integer Minimum value: 1 Maximum value: 65535
metric-l1 Level 1 metric for interface. integer Minimum value: 1 Maximum value: 63
metric-l2 Level 2 metric for interface. integer Minimum value: 1 Maximum value: 63
wide-metric-l1 Level 1 wide metric for interface. integer Minimum value: 1 Maximum value: 16777214
wide-metric-l2 Level 2 wide metric for interface. integer Minimum value: 1 Maximum value: 16777214
auth-password-l1 Authentication password for level 1 PDUs. password Not Specified
auth-password-l2 Authentication password for level 2 PDUs. password Not Specified
auth-keychain-l1 Authentication key-chain for level 1 PDUs. string Maximum length: 35
auth-keychain-l2 Authentication key-chain for level 2 PDUs. string Maximum length: 35
auth-send-only-l1 Enable/disable authentication send-only for level 1 PDUs.
enable: Enable authentication send-only for level 1 PDUs.
disable: Disable authentication send-only for level 1 PDUs.
option -
auth-send-only-l2 Enable/disable authentication send-only for level 2 PDUs.
enable: Enable authentication send-only for level 2 PDUs.
disable: Disable authentication send-only for level 2 PDUs.
option -
auth-mode-l1 Level 1 authentication mode.
md5: MD5.
password: Password.
option -
auth-mode-l2 Level 2 authentication mode.
md5: MD5.
password: Password.
option -
priority-l1 Level 1 priority. integer Minimum value: 0 Maximum value: 127
priority-l2 Level 2 priority. integer Minimum value: 0 Maximum value: 127
mesh-group Enable/disable IS-IS mesh group.
enable: Enable IS-IS mesh group.
disable: Disable IS-IS mesh group.
option -
mesh-group-id Mesh group ID , 0: mesh-group blocked. integer Minimum value: 0 Maximum value: 4294967295
Parameter Name Description Type Size
prefix Prefix. ipv4-classnet-any Not Specified
level Level.
level-1-2: Level 1 and 2.
level-1: Level 1.
level-2: Level 2.
option -
Parameter Name Description Type Size
prefix6 IPv6 prefix. ipv6-prefix Not Specified
level Level.
level-1-2: Level 1 and 2.
level-1: Level 1.
level-2: Level 2.
option -
Parameter Name Description Type Size
status Status.
enable: Enable.
disable: Disable.
option -
metric Metric. integer Minimum value: 0 Maximum value: 4261412864
metric-type Metric type.
external: External.
internal: Internal.
option -
level Level.
level-1-2: Level 1 and 2.
level-1: Level 1.
level-2: Level 2.
option -
routemap Route map name. string Maximum length: 35
Parameter Name Description Type Size
status Enable/disable redistribution.
enable: Enable redistribution.
disable: Disable redistribution.
option -
metric Metric. integer Minimum value: 0 Maximum value: 4261412864
metric-type Metric type.
external: External metric type.
internal: Internal metric type.
option -
level Level.
level-1-2: Level 1 and 2.
level-1: Level 1.
level-2: Level 2.
option -
routemap Route map name. string Maximum length: 35