Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.2.1
Copy Link

Configure USB LTE/WIMAX devices.

  config system lte-modem
      Description: Configure USB LTE/WIMAX devices.
      set status [enable|disable]
      set extra-init {string}
      set authtype [none|pap|...]
      set username {string}
      set passwd {password}
      set apn {string}
      set modem-port {integer}
      set mode [standalone|redundant]
      set holddown-timer {integer}
      set interface {string}
  end

config system lte-modem

Parameter Name Description Type Size
status Enable/disable USB LTE/WIMAX device.
enable: Enable USB LTE/WIMA device.
disable: Disable USB LTE/WIMA device.
option -
extra-init Extra initialization string for USB LTE/WIMAX devices. string Maximum length: 127
authtype Authentication type for PDP-IP packet data calls.
none: Username and password not required.
pap: Use PAP authentication.
chap: Use CHAP authentication.
option -
username Authentication username for PDP-IP packet data calls. string Maximum length: 63
passwd Authentication password for PDP-IP packet data calls. password Not Specified
apn Login APN string for PDP-IP packet data calls. string Maximum length: 127
modem-port Modem port index (0 - 20). integer Minimum value: 0 Maximum value: 20
mode Modem operation mode.
standalone: Standalone modem operation mode.
redundant: Redundant modem operation mode where the modem is used as a backup interface.
option -
holddown-timer Hold down timer (10 - 60 sec). integer Minimum value: 10 Maximum value: 60
interface The interface that the modem is acting as a redundant interface for. string Maximum length: 63

Configure USB LTE/WIMAX devices.

  config system lte-modem
      Description: Configure USB LTE/WIMAX devices.
      set status [enable|disable]
      set extra-init {string}
      set authtype [none|pap|...]
      set username {string}
      set passwd {password}
      set apn {string}
      set modem-port {integer}
      set mode [standalone|redundant]
      set holddown-timer {integer}
      set interface {string}
  end

config system lte-modem

Parameter Name Description Type Size
status Enable/disable USB LTE/WIMAX device.
enable: Enable USB LTE/WIMA device.
disable: Disable USB LTE/WIMA device.
option -
extra-init Extra initialization string for USB LTE/WIMAX devices. string Maximum length: 127
authtype Authentication type for PDP-IP packet data calls.
none: Username and password not required.
pap: Use PAP authentication.
chap: Use CHAP authentication.
option -
username Authentication username for PDP-IP packet data calls. string Maximum length: 63
passwd Authentication password for PDP-IP packet data calls. password Not Specified
apn Login APN string for PDP-IP packet data calls. string Maximum length: 127
modem-port Modem port index (0 - 20). integer Minimum value: 0 Maximum value: 20
mode Modem operation mode.
standalone: Standalone modem operation mode.
redundant: Redundant modem operation mode where the modem is used as a backup interface.
option -
holddown-timer Hold down timer (10 - 60 sec). integer Minimum value: 10 Maximum value: 60
interface The interface that the modem is acting as a redundant interface for. string Maximum length: 63