Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.2.1
Copy Link

Configure IPv6 multicast.

  config router multicast6
      Description: Configure IPv6 multicast.
      set multicast-routing [enable|disable]
      set multicast-pmtu [enable|disable]
      config interface
          Description: Protocol Independent Multicast (PIM) interfaces.
          edit <name>
              set hello-interval {integer}
              set hello-holdtime {integer}
          next
      end
      config pim-sm-global
          Description: PIM sparse-mode global settings.
          set register-rate-limit {integer}
          config rp-address
              Description: Statically configured RP addresses.
              edit <id>
                  set ip6-address {ipv6-address}
              next
          end
      end
  end

config router multicast6

Parameter Name Description Type Size
multicast-routing Enable/disable IPv6 multicast routing.
enable: Enable IPv6 multicast routing.
disable: Disable IPv6 multicast routing.
option -
multicast-pmtu Enable/disable PMTU for IPv6 multicast.
enable: Enable PMTU for IPv6 multicast.
disable: Disable PMTU for IPv6 multicast.
option -
Parameter Name Description Type Size
hello-interval Interval between sending PIM hello messages (1 - 65535 sec, default = 30).. integer Minimum value: 1 Maximum value: 65535
hello-holdtime Time before old neighbour information expires (1 - 65535 sec, default = 105). integer Minimum value: 1 Maximum value: 65535
Parameter Name Description Type Size
register-rate-limit Limit of packets/sec per source registered through this RP (0 means unlimited). integer Minimum value: 0 Maximum value: 65535

config rp-address

Parameter Name Description Type Size
ip6-address RP router IPv6 address. ipv6-address Not Specified

Configure IPv6 multicast.

  config router multicast6
      Description: Configure IPv6 multicast.
      set multicast-routing [enable|disable]
      set multicast-pmtu [enable|disable]
      config interface
          Description: Protocol Independent Multicast (PIM) interfaces.
          edit <name>
              set hello-interval {integer}
              set hello-holdtime {integer}
          next
      end
      config pim-sm-global
          Description: PIM sparse-mode global settings.
          set register-rate-limit {integer}
          config rp-address
              Description: Statically configured RP addresses.
              edit <id>
                  set ip6-address {ipv6-address}
              next
          end
      end
  end

config router multicast6

Parameter Name Description Type Size
multicast-routing Enable/disable IPv6 multicast routing.
enable: Enable IPv6 multicast routing.
disable: Disable IPv6 multicast routing.
option -
multicast-pmtu Enable/disable PMTU for IPv6 multicast.
enable: Enable PMTU for IPv6 multicast.
disable: Disable PMTU for IPv6 multicast.
option -
Parameter Name Description Type Size
hello-interval Interval between sending PIM hello messages (1 - 65535 sec, default = 30).. integer Minimum value: 1 Maximum value: 65535
hello-holdtime Time before old neighbour information expires (1 - 65535 sec, default = 105). integer Minimum value: 1 Maximum value: 65535
Parameter Name Description Type Size
register-rate-limit Limit of packets/sec per source registered through this RP (0 means unlimited). integer Minimum value: 0 Maximum value: 65535

config rp-address

Parameter Name Description Type Size
ip6-address RP router IPv6 address. ipv6-address Not Specified