Fortinet black logo

Administration Guide

Enabling LLDP on a port

Copy Link
Copy Doc ID 962fb21b-9bd3-11eb-b70b-00505692583a:585560
Download PDF

Enabling LLDP on a port

To enable LLDP MED on a port, set the LLDP status to receive-only, transmit-only, or receive and transmit. The default value is TX/RX.

Using the GUI:
  1. Go to Switch > Port > Physical.
  2. Select a port and select Edit.
  3. Select TX/RX, RX Only, TX Only, or Disable for the LLDP-MED status.
  4. Select an LLDP profile.
  5. Select Update.
Using the CLI:

config switch physical-port

edit <port>

set lldp-status (rx-only | tx-only | tx-rx | disable)

set lldp-profile <profile name>

next

end

Enabling LLDP on a port

To enable LLDP MED on a port, set the LLDP status to receive-only, transmit-only, or receive and transmit. The default value is TX/RX.

Using the GUI:
  1. Go to Switch > Port > Physical.
  2. Select a port and select Edit.
  3. Select TX/RX, RX Only, TX Only, or Disable for the LLDP-MED status.
  4. Select an LLDP profile.
  5. Select Update.
Using the CLI:

config switch physical-port

edit <port>

set lldp-status (rx-only | tx-only | tx-rx | disable)

set lldp-profile <profile name>

next

end