Fortinet Document Library

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Download PDF
Copy Link

Configuring QSFP low-power mode

On FortiSwitch models with QSFP (quad small form-factor pluggable) ports, you can enable or disable the low-power mode with the following CLI commands:

config switch physical-port

edit <port_name>

set qsfp-low-power-mode {enabled | disabled}

end

 

For example:

config switch physical-port

edit port12

set qsfp-low-power-mode disabled

end

Configuring QSFP low-power mode

On FortiSwitch models with QSFP (quad small form-factor pluggable) ports, you can enable or disable the low-power mode with the following CLI commands:

config switch physical-port

edit <port_name>

set qsfp-low-power-mode {enabled | disabled}

end

 

For example:

config switch physical-port

edit port12

set qsfp-low-power-mode disabled

end