Fortinet Document Library

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Download PDF
Copy Link

Checking the LLDP configuration

View the LLDP configuration settings using the GUI:
  1. Go to Switch > LLDP-MED > Settings.
  2. Make any changes that are needed.
  3. Select Update.
View the LLDP configuration settings using the CLI:

get switch lldp settings

status : enable

tx-hold : 4

tx-interval : 30

fast-start-interval : 2

management-interface: internal

View the LLDP profiles using the GUI:
  1. Go to Switch > LLDP-MED > Profiles.
  2. Select a profile and then select Edit.
  3. Make any changes that are needed.
  4. Select Update.
View the LLDP profiles using the CLI:

get switch lldp profile

== [ default ]

name: default 802.1-tlvs: 802.3-tlvs: med-tlvs: inventory-management network-policy

== [ default-auto-isl ]

name: default-auto-isl 802.1-tlvs: 802.3-tlvs: med-tlvs:

 

Use the following commands to display the LLDP  information about LLDP status or the layer-2 peers for this FortiSwitch unit:

get switch lldp (auto-isl-status | neighbors-detail | neighbors-summary | profile | settings | stats)

Checking the LLDP configuration

View the LLDP configuration settings using the GUI:
  1. Go to Switch > LLDP-MED > Settings.
  2. Make any changes that are needed.
  3. Select Update.
View the LLDP configuration settings using the CLI:

get switch lldp settings

status : enable

tx-hold : 4

tx-interval : 30

fast-start-interval : 2

management-interface: internal

View the LLDP profiles using the GUI:
  1. Go to Switch > LLDP-MED > Profiles.
  2. Select a profile and then select Edit.
  3. Make any changes that are needed.
  4. Select Update.
View the LLDP profiles using the CLI:

get switch lldp profile

== [ default ]

name: default 802.1-tlvs: 802.3-tlvs: med-tlvs: inventory-management network-policy

== [ default-auto-isl ]

name: default-auto-isl 802.1-tlvs: 802.3-tlvs: med-tlvs:

 

Use the following commands to display the LLDP  information about LLDP status or the layer-2 peers for this FortiSwitch unit:

get switch lldp (auto-isl-status | neighbors-detail | neighbors-summary | profile | settings | stats)