Fortinet Document Library

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Download PDF
Copy Link

Configuring auto topology

Use the auto topology feature to automatically form an inter-switch link (ISL) between two switches. You need to enable the feature and specify the mgmt-vlan. The mgmt-vlan is the VLAN to use for the native VLAN on ISL ports and the native VLAN on the internal switch interface.

NOTE: Do not use the same VLAN for the mgmt-vlan and an existing switch virtual interface (SVI).

config switch auto-network

set mgmt-vlan <1-4094>

set status {enable | disable}

end

 

For example:

config switch auto-network

set mgmt-vlan 101

set status enable

end

 

config switch interface

edit "internal"

set native-vlan 101

set allowed-vlans 100-102,4094

set stp-state disabled

set snmp-index 53

next

end

Configuring auto topology

Use the auto topology feature to automatically form an inter-switch link (ISL) between two switches. You need to enable the feature and specify the mgmt-vlan. The mgmt-vlan is the VLAN to use for the native VLAN on ISL ports and the native VLAN on the internal switch interface.

NOTE: Do not use the same VLAN for the mgmt-vlan and an existing switch virtual interface (SVI).

config switch auto-network

set mgmt-vlan <1-4094>

set status {enable | disable}

end

 

For example:

config switch auto-network

set mgmt-vlan 101

set status enable

end

 

config switch interface

edit "internal"

set native-vlan 101

set allowed-vlans 100-102,4094

set stp-state disabled

set snmp-index 53

next

end