Configure incident alert and response time thresholds
Incident alerts and response time thresholds can be configured while adding or editing a network-based metric. This allows you to control when to get alerted, the Alert Timeline to use, and the severity to be assigned when an incident occurs.
For example:
-
You can configure a metric to create an incident when an DNS port check is unsuccessful for more than 5 minutes.
-
Assign a severity of Critical to the incident.
-
Select the Alert Timeline to notify when the incident occurs.
To configure alert thresholds for network service checks, see the following sections:
Incident alerts thresholds
To configure incident alert thresholds, perform the following steps:
-
On the Instance Details page, choose a network-based metric to configure.
-
Select the More icon, then select Edit.
-
On the Incident Alerts & CounterMeasures modal, configure the following fields:
Field |
Description |
---|---|
When HTTPS check is unsuccessful for |
Select the period of time or (threshold period) before an incident is created after the first unsuccessful network check. Values:
|
create an incident with the severity |
Select the severity to assign to the created incident. Values:
|
and notify with the Alert Timeline |
Select which Alert Timeline to use when the configured threshold period is breached. |
Override Server Alerts |
If selected, only the specified Alert Timeline will be if an incident occurs for this service. Otherwise, the selected Alert Timeline will be used in addition to the standard alerts for the server. |
Availability Inclusion |
Select if you want to include this alert to your server's availability calculation. |
Incident CounterMeasures |
Select + Add CounterMeasure to create a CounterMeasure to run when this threshold is breached. See CounterMeasures Overview. Note: The Agent must be updated to add a CounterMeasure. |
4. To configure Response Time Thresholds, see the following section. Otherwise, select Save.
Response time thresholds
To configure incident alert thresholds, perform the following steps:
-
On the Instance Details page, choose a network-based metric to configure.
-
Select the More icon, then select Edit.
-
On the Response Time Thresholds & CounterMeasures modal, configure the following fields:
Field |
Description |
---|---|
When response time is greater than |
If the selected value is greater than the response time for a specified amount of time, an incident is created. Values:
|
For more than |
If the response time is greater than the value specified in the When response time is greater than field for more than the selected value, an incident is created. Values:
|
Notify with Alert Timeline |
Select which Alert Timeline to use when the configured response time threshold is breached. |
With a severity of |
Select the severity to assign to the created incident. Values:
|
Include metric performance in availability |
Select if you want to include this metric's performance to your server's availability calculation. |
Response time CounterMeasures |
Select + Add CounterMeasure to create a CounterMeasure to run when this threshold is breached. See CounterMeasures Overview. Note: The Agent must be updated to add a CounterMeasure. |
4. Select Save.