Adding physical interfaces for VDOMs
When creating a profile for VDOMs, you can add physical interfaces to the profile and configure them. The settings in the profile can be used for all VDOMs.
Instead of adding physical interfaces to the profile for all VDOMs, you can retrieve interfaces for the VDOM when you add it to SD-WAN Orchestrator MEA. See Adding VDOMs .
To add physical interfaces:
- Go to Configuration > Profile.
The list of profiles is displayed.
- Create a new profile, or open a profile for updating.
The Profile <name> dialog box is displayed.
- Click the Network tab.
The Network pane is displayed. For a description of the options, see Network tab.
- Add physical interfaces to the profile:
- Click Add Physical Interface.
The Add Interface dialog box is displayed.
- Complete the options, and click OK.
Option
Description
Available Interface
Select an interface.
Role
Specify a role for the interface. Choose from the following:
- WAN
- LAN
- DMZ
- When you are finished adding physical interfaces, close the dialog box.
The added interfaces display in the section for the role. For example, if you added a physical interface for a role of WAN, the interface displays in the WAN table.
- Click Add Physical Interface.
- Click OK.
The profile is saved.