SD-WAN real-time monitoring (30 seconds) supported per-device 7.0.3
SD-WAN real-time monitoring (30 seconds) supported per-device.
To configure real-time monitoring in the SD-WAN Monitor:
- In a 7.0 ADOM, go to Device Manager > Monitors > SD-WAN Monitor.
- Select Table View from the toolbar.
- Select a device from the Devices dropdown menu.
- Open the Refresh dropdown menu. The menu now includes real-time monitoring options including Every 30 Seconds, Every 1 Minute, and Every 3 Minutes in addition to the previously available refresh options.
- In the FortiManager CLI, enable SD-WAN monitor history:
config system admin setting
set sdwan-monitor-history enable
end
The GUI works in mixed modes when SD-WAN history is enabled so that administrators do not need to switch the CLI back and forth to view realtime data.
- When you drilldown per-device on the SD-WAN Monitor page, the default refresh interval is one hour with manual refresh.
- If you choose to set the refresh interval to every 30 seconds, 1 minute, or three minutes, the timespan range is fixed to the last 10 minutes and cannot be changed. The FortiManager GUI will retrieve data from FortiGate.
- When you drilldown per-device on the SD-WAN Monitor page, the default refresh interval is one hour with manual refresh.