Fortinet Document Library

Version:


Table of Contents

Cookbook

6.2.0
Download PDF
Copy Link

Removing the network interfaces from the bridge

To remove port2 and port3 from the bridge repeat the following steps for each port.

  1. Go to System > Network > Interface in the Advanced Mode of the FortiMail UI.
  2. Select the port and click Edit.
  3. Enable Do not associate with management IP. The interface is removed from the bridge, and may be configured with its own IP address.
  4. Set IP/Netmask to the IP address and netmask of the network interface.
  5. Under Advanced Setting, disable all administrative access protocols under Access and Web access, as shown in the example.
  6. Click Up, and click OK.

Removing the network interfaces from the bridge

To remove port2 and port3 from the bridge repeat the following steps for each port.

  1. Go to System > Network > Interface in the Advanced Mode of the FortiMail UI.
  2. Select the port and click Edit.
  3. Enable Do not associate with management IP. The interface is removed from the bridge, and may be configured with its own IP address.
  4. Set IP/Netmask to the IP address and netmask of the network interface.
  5. Under Advanced Setting, disable all administrative access protocols under Access and Web access, as shown in the example.
  6. Click Up, and click OK.