Configuring Hub devices
Hub configuration remains unchanged. We will reuse the templates created in the previous chapter. See Configuring the Hub device.
To onboard the Secondary Hub, follow the instructions in Deploying the Hub device. We will call it site1-H2. Make sure you fill in the right values for its Meta Fields. The Meta Field values should, of course, differ from those set for the Primary Hub. The following values are used in our example:
|
Meta Field |
site1-H1 |
site1-H2 |
|---|---|---|
|
as |
65001 |
65001 |
|
inet-id |
11 |
21 |
|
inet-intf |
port1 |
port1 |
|
inet-tunnel-net |
10.201.1.0/24 |
10.201.2.0/24 |
|
mpls-id |
12 |
22 |
|
mpls-intf |
port4 |
port4 |
|
mpls-tunnel-net |
10.202.1.0/24 |
10.202.2.0/24 |
|
tunnel-mask |
255.255.255.0 |
255.255.255.0 |
|
lan-summary |
10.0.0.0/14 |
10.0.0.0/14 |
|
lan-net |
10.1.0.0/24 |
10.2.0.0/24 |
Finish the onboarding process. You now have two fully managed and completely deployed Hub devices:
