Dual Hub deployment

Building on the previous section, the second hub is added in the same way the first was. In this chapter, we will extend the basic configuration to include two Hubs operating as Primary/Secondary.

Before you begin, ensure that you have completed the following tasks:

1. Complete common elements. See FortiManager common elements.
2. Complete a Single Hub deployment, which includes Meta Fields and Normalized Interfaces. See Single Hub deployment.

Following is a summary of how to configure Dual Hub SD-WAN:

1. Configure hub devices. See Configuring Hub devices.
2. Configure edge devices. See Configuring Edge devices.
3. Verify the configuration. See Verifying configuration.

See also Dual Hub topology.