Fortinet black logo

Cookbook

Verifying the correct firewall policy is being used

Copy Link
Copy Doc ID af0e75e9-211f-11ea-9384-00505692583a:525166
Download PDF

Verifying the correct firewall policy is being used

If you have more than one firewall policy, you can check which policy is being used in the Policy & Objects module in the GUI.

To verify the firewall policy in the GUI:
  1. Go to:
    • Policy & Objects > IPv4 Policy.

    or

    • Policy & Objects > IPv6 Policy.
  2. Look in the Count column to see which policy is being used. The count must show traffic increasing.

Debugging the packet flow in the CLI shows the policy ID that's allowing the traffic. For information, see Debugging the packet flow.

Verifying the correct firewall policy is being used

If you have more than one firewall policy, you can check which policy is being used in the Policy & Objects module in the GUI.

To verify the firewall policy in the GUI:
  1. Go to:
    • Policy & Objects > IPv4 Policy.

    or

    • Policy & Objects > IPv6 Policy.
  2. Look in the Count column to see which policy is being used. The count must show traffic increasing.

Debugging the packet flow in the CLI shows the policy ID that's allowing the traffic. For information, see Debugging the packet flow.