Fortinet Document Library

Version:

Version:

Version:


Table of Contents

More Links

FortiClient EMS connector
Dynamic endpoint grouping/tagging and EMS connector (endpoint compliance)
Dynamic policies - FortiClient EMS

Cookbook

Download PDF
Copy Link

FortiClient EMS connector

This example describes how to create a FortiClient EMS connector and a user group for the connector.

To create an FortiClient EMS connector in the GUI:
  1. Go to Security Fabric > Fabric Connectors.
  2. Click Create New.
  3. In the SSO/Identity section, click FortiClient EMS.

  4. Fill in the Name, and Primary Server IP, and select a Trusted SSL certificate.
  5. Click OK.

    The connector is shown on the Fabric Connectors page.

To create a user group for the EMS fabric connector using the GUI:
  1. Go to User & Device > User Definition.
  2. Click Create New.
  3. Select FortiClient EMS User, then click Next.

  4. In the Fabric Device list select the EMS fabric connector that you created.
  5. Select tags and then click Next.

  6. In the Add to FSSO Group field, click Create New.
  7. Enter a name for the group.

  8. Click Submit.

    The configured group is shown at User & Device > User Groups.

More Links

FortiClient EMS connector

This example describes how to create a FortiClient EMS connector and a user group for the connector.

To create an FortiClient EMS connector in the GUI:
  1. Go to Security Fabric > Fabric Connectors.
  2. Click Create New.
  3. In the SSO/Identity section, click FortiClient EMS.

  4. Fill in the Name, and Primary Server IP, and select a Trusted SSL certificate.
  5. Click OK.

    The connector is shown on the Fabric Connectors page.

To create a user group for the EMS fabric connector using the GUI:
  1. Go to User & Device > User Definition.
  2. Click Create New.
  3. Select FortiClient EMS User, then click Next.

  4. In the Fabric Device list select the EMS fabric connector that you created.
  5. Select tags and then click Next.

  6. In the Add to FSSO Group field, click Create New.
  7. Enter a name for the group.

  8. Click Submit.

    The configured group is shown at User & Device > User Groups.