Shelf manager MIB fields

To run SNMP queries with the FortiGate-5000 shelf manager you need to import the PPS-SENTRY-MIB.txt file into your SNMP manager. Use SNMP version 2c and the community string public.

To help locate a field, the object identifier (OID) number for each table of fields has been included. The OID number for a field is that field’s position within the table, starting at 0.

The path is SNMPv2-SMI::enterprises.pps.products.chassis-management.ipm-sentry-shmm and the OID for this path is .1.3.6.1.4.1.16394.2.1.1

This section describes the following fields in this path.

• IPM sentry SHMM 1.3.6.1.4.1.16394.2.1.1

  • IPM controller 1.3.6.1.4.1.16394.2.1.1.1

  • FRU device 1.3.6.1.4.1.16394.2.1.1.2

  • Sensor 1.3.6.1.4.1.16394.2.1.1.3

  • Board 1.3.6.1.4.1.16394.2.1.1.4

  • System event log (Sel) 1.3.6.1.4.1.16394.2.1.1.5

  • Shelf 1.3.6.1.4.1.16394.2.1.1.6

  • LAN configuration 1.3.6.1.4.1.16394.2.1.1.7

  • Shelf manager platform event filter (PEF) 1.3.6.1.4.1.16394.2.1.1.8 - 19

  • FRU information table 1.3.6.1.4.1.16394.2.1.1.20

  • Shelf manager FRU device by site 1.3.6.1.4.1.16394.2.1.1.21

  • FRU LED state 1.3.6.1.4.1.16394.2.1.1.22

  • Board basic information 1.3.6.1.4.1.16394.2.1.1.32

  • Fan trays 1.3.6.1.4.1.16394.2.1.1.33

  • Power supply 1.3.6.1.4.1.16394.2.1.1.34

  • Shelf manager 1.3.6.1.4.1.16394.2.1.1.35

  • Chassis 1.3.6.1.4.1.16394.2.1.1.36

  • Shelf manager event 1.3.6.1.4.1.16394.2.1.1.37

  • Shelf manager shelf manager status 1.3.6.1.4.1.16394.2.1.1.38

  • Shelf manager shelf manager version 1.3.6.1.4.1.16394.2.1.1.39

  • Shelf manager telco alarm 1.3.6.1.4.1.16394.2.1.1.40

  • Shelf manager sel information 1.3.6.1.4.1.16394.2.1.1.41