Fortinet black logo

Session-Aware Load Balancing Cluster Guide

Changing the base control subnet and VLAN

5.2.10
Copy Link
Copy Doc ID 31a89d05-200d-11e9-b6f6-f8bc1258b856:455143
Download PDF

Changing the base control subnet and VLAN

You can change the base control subnet and VLAN from the FortiController CLI. For example to change the base control subnet to 10.122.11.0/255.255.255.0 and the VLAN ID to 320:

config load-balance setting

set base-ctrl-network 10.122.11.0 255.255.255.0

config base-ctrl-interfaces

edit b1

set vlan-id 320

next

edit b2

set vlan-id 320

end

end

If required, you can use different VLAN IDs for the B1 and B2 interface.

Changing this VLAN only changes the VLAN used for base control traffic between chassis. Within a chassis the default VLAN is used.

Changing the base control subnet and VLAN

You can change the base control subnet and VLAN from the FortiController CLI. For example to change the base control subnet to 10.122.11.0/255.255.255.0 and the VLAN ID to 320:

config load-balance setting

set base-ctrl-network 10.122.11.0 255.255.255.0

config base-ctrl-interfaces

edit b1

set vlan-id 320

next

edit b2

set vlan-id 320

end

end

If required, you can use different VLAN IDs for the B1 and B2 interface.

Changing this VLAN only changes the VLAN used for base control traffic between chassis. Within a chassis the default VLAN is used.