Fortinet black logo

Session-Aware Load Balancing Cluster Guide

5.2.10

diagnose switch fabric-channel physical-ports

diagnose switch fabric-channel physical-ports

Display information about fabric channel physical ports.

diagnose switch fabric-channel physical-ports {clear-stats | list <port-name> | summary}

  • clear-stats reset counters on one or all ports
  • list <port-name> list details of a physical port's statistics
  • summary list summary information of all physical ports

The following example shows how to list all fabric channel ports, list details for slot-5, clear the counters for slot-5 and list the details for slot-5 again.

diagnose switch fabric-channel physical-ports summary


   Portname    Status  Vlan  Duplex  Speed  Flags
   __________  ______  ____  ______  _____  __________

   f1          up      100   full    10G    QE,TL,
   f2          up      100   full    10G    QE,TL,
   f3          up      100   full    10G    QE,TL,
   f4          up      100   full    10G    QE,TL,
   f5          down    104   full    10G    QE,  ,
   f6          down    105   full    10G    QE,  ,
   f7          down    106   full    10G    QE,  ,
   f8          up      107   full    10G    QE,  ,
   slot-1/2    down    1     full    10G    QI,  ,
   slot-3      down    1     full    10G    QI,  ,
   slot-4      down    1     full    10G    QI,  ,
   slot-5      up      400   full    10G    QI,  ,
   slot-6      up      400   full    10G    QI,  ,
   slot-7      down    1     full    10G    QI,  ,
   slot-8      down    1     full    10G    QI,  ,
   slot-9      down    1     full    10G    QI,  ,
   slot-10     down    1     full    10G    QI,  ,
   slot-11     down    1     full    10G    QI,  ,
   slot-12     down    1     full    10G    QI,  ,
   slot-13     down    1     full    10G    QI,  ,
   slot-14     down    1     full    10G    QI,  ,

   Flags: QS(802.1Q) QE(802.1Q-in-Q,external) QI(802.1Q-in-Q,internal)
   TS(static trunk) TF(forti trunk) TL(lacp trunk); MD(mirror dst)
   MI(mirror ingress) ME(mirror egress) MB(mirror ingress and egress)


diagnose switch fabric-channel physical-ports list slot-5

Port(slot-5) is up, line protocol is up
Interface Type is 10 Gigabit Media Independent Interface (XGMII)
Address is 00:09:0F:62:11:12, loopback is not set
MTU 16356 bytes, Encapsulation IEEE 802.3/Ethernet-II
full-duplex, 10000 b/s, link type is manual
25994 packets input, 2065330 bytes(unicasts 0, multicasts and broadcasts
25994)
33025 packets output, 14442754 bytes(unicasts 2, multicasts and
broadcasts 33023)
input: good 25994, drop 0, unknown protocols 0
        error 0 (crc 0, undersize 0, frame 0, oversize 0, jabbers 0,
collisions 0)
output: good 33025, drop 0, error 0


diagnose switch fabric-channel physical-ports clear-stats


diagnose switch fabric-channel physical-ports list slot-5

Port(slot-5) is up, line protocol is up
Interface Type is 10 Gigabit Media Independent Interface (XGMII)
Address is 00:09:0F:62:11:12, loopback is not set
MTU 16356 bytes, Encapsulation IEEE 802.3/Ethernet-II
full-duplex, 10000 b/s, link type is manual
4 packets input, 272 bytes(unicasts 0, multicasts and broadcasts 4)
5 packets output, 2415 bytes(unicasts 0, multicasts and broadcasts 5)
input: good 4, drop 0, unknown protocols 0
        error 0 (crc 0, undersize 0, frame 0, oversize 0, jabbers 0,
collisions 0)
output: good 5, drop 0, error 0

diagnose switch fabric-channel physical-ports

Display information about fabric channel physical ports.

diagnose switch fabric-channel physical-ports {clear-stats | list <port-name> | summary}

  • clear-stats reset counters on one or all ports
  • list <port-name> list details of a physical port's statistics
  • summary list summary information of all physical ports

The following example shows how to list all fabric channel ports, list details for slot-5, clear the counters for slot-5 and list the details for slot-5 again.

diagnose switch fabric-channel physical-ports summary


   Portname    Status  Vlan  Duplex  Speed  Flags
   __________  ______  ____  ______  _____  __________

   f1          up      100   full    10G    QE,TL,
   f2          up      100   full    10G    QE,TL,
   f3          up      100   full    10G    QE,TL,
   f4          up      100   full    10G    QE,TL,
   f5          down    104   full    10G    QE,  ,
   f6          down    105   full    10G    QE,  ,
   f7          down    106   full    10G    QE,  ,
   f8          up      107   full    10G    QE,  ,
   slot-1/2    down    1     full    10G    QI,  ,
   slot-3      down    1     full    10G    QI,  ,
   slot-4      down    1     full    10G    QI,  ,
   slot-5      up      400   full    10G    QI,  ,
   slot-6      up      400   full    10G    QI,  ,
   slot-7      down    1     full    10G    QI,  ,
   slot-8      down    1     full    10G    QI,  ,
   slot-9      down    1     full    10G    QI,  ,
   slot-10     down    1     full    10G    QI,  ,
   slot-11     down    1     full    10G    QI,  ,
   slot-12     down    1     full    10G    QI,  ,
   slot-13     down    1     full    10G    QI,  ,
   slot-14     down    1     full    10G    QI,  ,

   Flags: QS(802.1Q) QE(802.1Q-in-Q,external) QI(802.1Q-in-Q,internal)
   TS(static trunk) TF(forti trunk) TL(lacp trunk); MD(mirror dst)
   MI(mirror ingress) ME(mirror egress) MB(mirror ingress and egress)


diagnose switch fabric-channel physical-ports list slot-5

Port(slot-5) is up, line protocol is up
Interface Type is 10 Gigabit Media Independent Interface (XGMII)
Address is 00:09:0F:62:11:12, loopback is not set
MTU 16356 bytes, Encapsulation IEEE 802.3/Ethernet-II
full-duplex, 10000 b/s, link type is manual
25994 packets input, 2065330 bytes(unicasts 0, multicasts and broadcasts
25994)
33025 packets output, 14442754 bytes(unicasts 2, multicasts and
broadcasts 33023)
input: good 25994, drop 0, unknown protocols 0
        error 0 (crc 0, undersize 0, frame 0, oversize 0, jabbers 0,
collisions 0)
output: good 33025, drop 0, error 0


diagnose switch fabric-channel physical-ports clear-stats


diagnose switch fabric-channel physical-ports list slot-5

Port(slot-5) is up, line protocol is up
Interface Type is 10 Gigabit Media Independent Interface (XGMII)
Address is 00:09:0F:62:11:12, loopback is not set
MTU 16356 bytes, Encapsulation IEEE 802.3/Ethernet-II
full-duplex, 10000 b/s, link type is manual
4 packets input, 272 bytes(unicasts 0, multicasts and broadcasts 4)
5 packets output, 2415 bytes(unicasts 0, multicasts and broadcasts 5)
input: good 4, drop 0, unknown protocols 0
        error 0 (crc 0, undersize 0, frame 0, oversize 0, jabbers 0,
collisions 0)
output: good 5, drop 0, error 0