diagnose switch fabric-channel mac-address filter
Filter fabric-channel MAC address data to diagnose behavior for link aggregation trunks.
diagnose switch fabric-channel mac-address filter {clear | flags | port-id-map | show | trunk-id-map | vlan-map}
-
clear
clear the MAC address display filter -
flags
enter a bit pattern to match and mask bits that are displayed -
port-id-map
set the port-id's to display -
show
show the current filter settings -
trunk-id-map
set the trunk-id's to display -
vlan-map
set the VLANs to display
The following commands show how to display the MAC address list for link aggregation trunk 1.
diagnose switch fabric-channel mac-address filter trunk-id-map 1 diagnose switch fabric-channel mac-address list MAC: 64:00:f1:d2:89:78 VLAN: 100 Trunk: trunk(trunk-id 1) Flags: 0x000004c0 [ used trunk ] MAC: 64:00:f1:d2:89:7b VLAN: 100 Trunk: trunk(trunk-id 1) Flags: 0x000004c0 [ used trunk ] MAC: 08:5b:0e:08:94:cc VLAN: 100 Trunk: trunk(trunk-id 1) Flags: 0x000004c0 [ used trunk ] MAC: 00:1d:09:f1:14:6b VLAN: 100 Trunk: trunk(trunk-id 1) Flags: 0x000004c0 [ used trunk ] MAC: 64:00:f1:d2:89:79 VLAN: 100 Trunk: trunk(trunk-id 1) Flags: 0x000004c0 [ used trunk ] MAC: 64:00:f1:d2:89:7a VLAN: 100 Trunk: trunk(trunk-id 1) Flags: 0x000004c0 [ used trunk ]