diagnose system ha status

Display HA status information for the FortiController HA cluster including the HA mode. As well the command displays status information for each of the FortiControllers in the cluster including the uptime, heartbeat IP address, and synchronization status.

diagnose system ha status
mode: a-p
minimize chassis failover: 1
FT513B3913000068(FT513B3913000068), Slave(priority=1), ip=169.254.128.2,
uptime=3535.28, chassis=1(1)
     slot: 2
     sync: conf_sync=1, elbc_sync=1
     session: total=0,  session_sync=in sync
     state: worker_failure=0/2, intf_state=(port up:)=5
  force-state(0:none)    hbdevs: local_interface=        b1 best=yes

FT513B3913000082(FT513B3913000082), Master(priority=0),
ip=169.254.128.1, uptime=3704.54, chassis=1(1)
     slot: 1
     sync: conf_sync=1, elbc_sync=1, conn=3(connected)
     session: total=0,  session_sync=in sync
     state: worker_failure=0/2, intf_state=(port up:)=5
  force-state(0:none)    hbdevs: local_interface=        b1
last_hb_time= 3622.36   status=alive