Shelf manager fan tray (OID 1.3.6.1.4.1.16394.2.1.1.33)
Path: SNMPv2-SMI::enterprises.pps.products.chassis-management.ipm-sentry-shmm.fantray
The table contains information about the Fan Trays in the system.
|
Index |
MIB field |
Description |
|---|---|---|
|
.1 |
fantry-entry |
An entry provides information about a single fan tray. Entries are indexed by a physical fan tray number which is equal to fan tray site number. |
|
.1.1 |
fantray-slot-number |
Table entry index, equal to the physical fan tray number. |
|
.1.2 |
fantray-present |
Returns (1) if fan tray is present in the slot, (0) otherwise. |
|
.1.3 |
fantray-healthy |
Returns (0) if the fan tray is unhealthy (i.e. it is in M1, M7 or the latest state change cause for this fan tray was unexpected), (1) otherwise. |
|
.1.4 |
fantray-health-led |
Returns the led state (0 =off, 1 =on) on reading. Writing to this variable turns the led on (value=1) or off (value=0). This variable is available in 2.x systems only. In ATCA systems it always is equal to -1 |
|
.1.5 |
fantray-slave-address |
Returns the 8-bit slave address of the IPM controller representing this fan tray on IPMB. |
|
.1.6 |
fantray-fru-device-id |
The FRU device ID of the fan tray. |
|
.1.7 |
fantray-fruinfo-product-area-present |
Returns (1) if the product area is present within the fan tray FRU information, (0) otherwise. |
|
.1.8 |
fantray-fruinfo-product-manufacturer |
Returns the product manufacturer from the fan tray FRU information, or N/A. |
|
.1.9 |
fantray-fruinfo-product-name |
Returns the product name from the fan tray FRU information, or N/A. |
|
.1.10 |
fantray-fruinfo-product-part-model-number |
Returns the product part model number from the fan tray FRU information, or N/A. |
|
.1.11 |
fantray-fruinfo-product-version-number |
Returns the product version from the fan tray FRU information, or N/A. |
|
.1.12 |
fantray-fruinfo-product-serial-number |
Returns the product serial number from the fan tray FRU information, or N/A. |
|
.1.13 |
fantray-fruinfo-board-area-present |
Returns (1) if the board area is present within the fan tray FRU information, (0) otherwise. |
|
.1.14 |
fantray-fruinfo-board-manufacturer |
Returns the board manufacturer from the fan tray FRU information, or N/A. |
|
.1.15 |
fantray-fruinfo-board-product-name |
Returns the board product name from the fan tray FRU information, or N/A. |
|
.1.16 |
fantray-fruinfo-board-serial-number |
Returns the board serial number from the fan tray FRU information, or N/A. |
|
.1.17 |
fantray-fruinfo-board-part-number |
Returns the board part number from the fan tray FRU information, or N/A. |
|
.1.18 |
fantray-fruinfo-board-manufacture-time |
Returns the board manufacturing time:the number of seconds since 00:00:00, January 1, 1970, (UTC) Returns -1 if the corresponding field is not present in the fan tray FRU information. |
|
.1.19 |
fantray-fan-level |
This variable allows getting/setting a current fan level. |
|
.1.20 |
fantray-fruinfo-product-asset-tag |
Returns the product asset tag from the fan tray FRU information, or N/A. |
|
.1.21 |
fantray-fruinfo-product-fru-file-id |
Returns the product FRU File ID from the fan tray FRU information, or N/A. |
|
.1.22 |
fantray-fruinfo-board-fru-file-id |
Returns the board FRU File ID from the fan tray FRU information, or N/A. |