Fortinet white logo
Fortinet white logo

Handbook

Configure SNMP threshold

Configure SNMP threshold

To configure SNMP threshold:
  1. Go to System > SNMP.
  2. Click the Threshold tab.
  3. Complete the configuration as described in SNMP threshold.
  4. Save the configuration.

SNMP threshold

Settings Guidelines
CPU
  • Trigger—The default is 80% utilization.
  • Threshold—The default is 3, meaning the event is reported when the condition has been triggered 3 times in a short period.
  • Sample Period—The default is 600 seconds.
  • Sample Frequency—The default is 30 seconds.
Memory
  • Trigger—The default is 80% utilization.
  • Threshold—The default is 3, meaning the event is reported when the condition has been triggered 3 times in a short period.
  • Sample Period—The default is 600 seconds.
  • Sample Frequency—The default is 30 seconds.
Disk
  • Trigger—The default is 90% utilization.
  • Threshold—The default is 1, meaning the event is reported each time the condition is triggered.
  • Sample Period—The default is 7200 seconds.
  • Sample Frequency—The default is 3600 seconds.

Configure SNMP threshold

Configure SNMP threshold

To configure SNMP threshold:
  1. Go to System > SNMP.
  2. Click the Threshold tab.
  3. Complete the configuration as described in SNMP threshold.
  4. Save the configuration.

SNMP threshold

Settings Guidelines
CPU
  • Trigger—The default is 80% utilization.
  • Threshold—The default is 3, meaning the event is reported when the condition has been triggered 3 times in a short period.
  • Sample Period—The default is 600 seconds.
  • Sample Frequency—The default is 30 seconds.
Memory
  • Trigger—The default is 80% utilization.
  • Threshold—The default is 3, meaning the event is reported when the condition has been triggered 3 times in a short period.
  • Sample Period—The default is 600 seconds.
  • Sample Frequency—The default is 30 seconds.
Disk
  • Trigger—The default is 90% utilization.
  • Threshold—The default is 1, meaning the event is reported each time the condition is triggered.
  • Sample Period—The default is 7200 seconds.
  • Sample Frequency—The default is 3600 seconds.