Fortinet Document Library

Version:

Version:

Version:

Version:

Version:


Table of Contents

Handbook

Configure IP reputation exception

To create an IP Reputation exception:
  1. Go to Network Security > IP Reputation.
  2. Click the IP Reputation Exception tab to add exceptions as described in IP Reputation exception.
  3. Click Save.

IP Reputation exception

Settings Guidelines

Status

Enable or disable the exception. You might have occasion to toggle the exception off and on.

Type

  • IP/netmask: Select this option to allow a specified IP address to pass through.
  • IP Range: Select this option to allow a specified range of IP addresses to pass through.

IP/Netmask

If IP/netmask is selected in the Type field above, specify a subnet using the address/mask notation.

Start IP / End IP

Is IP Range is selected in the Type field above, specify the starting address and ending address of the IP range.

Configure IP reputation exception

To create an IP Reputation exception:
  1. Go to Network Security > IP Reputation.
  2. Click the IP Reputation Exception tab to add exceptions as described in IP Reputation exception.
  3. Click Save.

IP Reputation exception

Settings Guidelines

Status

Enable or disable the exception. You might have occasion to toggle the exception off and on.

Type

  • IP/netmask: Select this option to allow a specified IP address to pass through.
  • IP Range: Select this option to allow a specified range of IP addresses to pass through.

IP/Netmask

If IP/netmask is selected in the Type field above, specify a subnet using the address/mask notation.

Start IP / End IP

Is IP Range is selected in the Type field above, specify the starting address and ending address of the IP range.