Fortinet Document Library

Version:

Version:

Version:

Version:

Version:


Table of Contents

Handbook

Virtual domain policies

FortiADC allows you to create and impose custom policies or restrictions on each virtual domain you have added. For each virtual domain, you can configure the maximum range for its Dynamic Resources and Static Resources. Dynamic Resources are related to a virtual domain's performance, while Static Resources are related to its configuration. The Vdom configuration dialog (Vdom configuration) also shows a virtual domain's current configuration and workload settings, which serve as good reference points for you to fine-tune the virtual domain.

Vdom configuration

 

VDOM configuration parameters

Parameter Description
Dynamic Resources  
L4 CPS

Shows the L4 CPS data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum L4 CPS data transfer rate by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

L7 CPS

Shows the L7 CPS data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum L7 CPS data transfer rate by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

L7 RPS

Shows the L7 RPS data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum L7 RPS data transfer rate by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

SSL CPS

Shows the SSL CPS data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum SSL CPS data transfer rate by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

SSL Throughput

Shows the SSL throughput rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum SSL throughput rate by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

Concurrent Session

Shows the number of concurrent sessions at the last page refresh.

Note: You can set the VDOM's maximum number of concurrent sessions by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

Inbound

Shows the inbound TCP data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum inbound TCP data transfer rate by specifying a desired value in the box. Valid values range from 0 to 4,000,000.

Outbound

Shows the outbound TCP data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum outbound TCP data transfer rate by specifying a desired value in the box. Valid values range from 0 to 4,000,000.

Static Resources  
Virtual Server

Shows the number of virtual servers at the last page refresh.

Note: You can set the maximum number of virtual servers that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

Real Server

Shows the number of real servers at the last page refresh.

Note: You can set the maximum number of real servers that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

Health Check

Shows the number of health check objects at the last page refresh.

Note: You can set the maximum number of health check objects that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

Source Pool

Shows the number of source pools at the last page refresh.

Note: You can set the maximum number of source pools that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

Error Page

Shows the number of error pages at the last page refresh.

Note: You can set the maximum number of error pages that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

Local User

Shows the number of local users at the last page refresh.

Note: You can set the maximum number of local users that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

User Group

Shows the number of user groups at the last page refresh.

Note: You can set the maximum number of user groups that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

Virtual domain policies

FortiADC allows you to create and impose custom policies or restrictions on each virtual domain you have added. For each virtual domain, you can configure the maximum range for its Dynamic Resources and Static Resources. Dynamic Resources are related to a virtual domain's performance, while Static Resources are related to its configuration. The Vdom configuration dialog (Vdom configuration) also shows a virtual domain's current configuration and workload settings, which serve as good reference points for you to fine-tune the virtual domain.

Vdom configuration

 

VDOM configuration parameters

Parameter Description
Dynamic Resources  
L4 CPS

Shows the L4 CPS data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum L4 CPS data transfer rate by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

L7 CPS

Shows the L7 CPS data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum L7 CPS data transfer rate by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

L7 RPS

Shows the L7 RPS data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum L7 RPS data transfer rate by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

SSL CPS

Shows the SSL CPS data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum SSL CPS data transfer rate by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

SSL Throughput

Shows the SSL throughput rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum SSL throughput rate by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

Concurrent Session

Shows the number of concurrent sessions at the last page refresh.

Note: You can set the VDOM's maximum number of concurrent sessions by specifying a desired value in the box. Valid values range from 0 to 1,000,000.

Inbound

Shows the inbound TCP data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum inbound TCP data transfer rate by specifying a desired value in the box. Valid values range from 0 to 4,000,000.

Outbound

Shows the outbound TCP data transfer rate in kilobyte per second (kB/s) at the last page refresh.

Note: You can set the VDOM's maximum outbound TCP data transfer rate by specifying a desired value in the box. Valid values range from 0 to 4,000,000.

Static Resources  
Virtual Server

Shows the number of virtual servers at the last page refresh.

Note: You can set the maximum number of virtual servers that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

Real Server

Shows the number of real servers at the last page refresh.

Note: You can set the maximum number of real servers that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

Health Check

Shows the number of health check objects at the last page refresh.

Note: You can set the maximum number of health check objects that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

Source Pool

Shows the number of source pools at the last page refresh.

Note: You can set the maximum number of source pools that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

Error Page

Shows the number of error pages at the last page refresh.

Note: You can set the maximum number of error pages that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

Local User

Shows the number of local users at the last page refresh.

Note: You can set the maximum number of local users that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.

User Group

Shows the number of user groups at the last page refresh.

Note: You can set the maximum number of user groups that can be configured on this VDOM by specifying a desired value in the box. Valid values range from 0 to 1024.