Configuring FortiSandbox service

FortiADC is integrated with FortiSandox tto enhance its anti-virus capabilities. Upon detecting suspicious traffic segments, FortiADC first conducts some basic analysis of its own and then forwards them to FortiSandbox for further analysis. The latter will then drop or quarantine the malicious traffic segments and forward healthy traffic segments to the back-end servers.

To configure FortiSandbox services:

1. From the navigation bar, click System>Settings.
2. Click the FortiSandbox tab.
3. Make the selection or entries as described in FortiSandbox service configuration.
4. Click Save when done.

FortiSandbox service configuration

Settings	Description
Type	Select either of the following: FSA—FortiSandbox appliance.
Status	Click the button to enable or disable FortiSandbox service. Note: FortiSandbox is disabled by default.
Server	Enter the IP address of the FortiSandbox appliance. Note: This option applies if you want to use a on-premise FortiSandbox appliance for service.
Email	The email address of the person to be notified.
Source IP	The IP address of the source interface on the FortiADC appliance.

FortiCloud Sandbox file upload limits

FortiCloud Sandbox file upload limit shows the maximum number of files per minute that you can upload to FortiCloud Sandbox from various FortiADC platforms.

FortiCloud Sandbox file upload limit

Platform	Number of files uploaded per minute
FortiADC 60F/VM01	5
FortiADC100—400/VM02	10
FortiADC 700D/VM04	20
FortiADC 1000—2000/VM08	50
FortiADC 4000	100