Fortinet Document Library

Version:

Version:

Version:

Version:

Version:


Table of Contents

Handbook

Packet capture

The tcpdump utility is supported through the CLI and web UI.

See the FortiADC CLI Reference for information on using the CLI command.

Use the following procedure to use the web UI version.

Before you begin:

To use the web UI version of tcpdump:
  1. Go to Networking > Packet Capture.
  2. Click Create New to open the Packet Capture editor, and specify your packet capture settings as shown in the figure below.
  3. Use the controls to start, stop, and download the packet capture. See Packet capture toolbar.
  4. Packet capture configuration page

    Packet capture toolbar

Packet capture

The tcpdump utility is supported through the CLI and web UI.

See the FortiADC CLI Reference for information on using the CLI command.

Use the following procedure to use the web UI version.

Before you begin:

To use the web UI version of tcpdump:
  1. Go to Networking > Packet Capture.
  2. Click Create New to open the Packet Capture editor, and specify your packet capture settings as shown in the figure below.
  3. Use the controls to start, stop, and download the packet capture. See Packet capture toolbar.
  4. Packet capture configuration page

    Packet capture toolbar