Configuring direct inward dialing

The Call Routing > Inbound > DID Mapping submenu lets you configure how to map Direct Inward Dialing (DID) numbers.

Local phone companies offer DID service to provide a block of telephone numbers for calling into a company’s PBX system over limited rented physical lines (also called “trunk lines”). The phone numbers you rent may not be enough to provide a DID number for each workstation, because each DID can only be mapped to one extension. With the FortiVoice unit, you have 2 options to address this issue:

• Only map the DID numbers to the extensions you want.
• Map a DID number to one or more extensions based on the callers’ phone numbers.

For more information, see Mapping DIDs.

To configure a standard voice DID

1. Go to Call Routing > Inbound > DID Mapping.
2. Click New and select Voice - Standard.
3. Configure the following and click Create.

GUI field		Description
Rule name		Enter a name for this DID setting.
Enable		Select to activate this DID setting.
Condition		Select the trunk used for dialing the DIDs.
Additional action		Select the fallback action to take if a caller not in the caller list dialed the DID number mapped to an extension. For some actions, you need to enter the extension, such as Dial voicemail. For information on filtering callers, see Mapping DIDs.
Number Mapping		For adding a number mapping, see Mapping DIDs. Click Export to open or save the number mapping file and Import to browse for a number mapping file.

To configure an advanced voice DID

1. Go to Call Routing > Inbound > DID Mapping.
2. Click New and select Voice - Advanced.
3. Configure the following and click Create.

GUI field		Description
Rule name		Enter a name for this DID setting.
Enable		Select to activate this DID setting.
Condition		Trunk: Select the trunk used for dialing the DIDs. Schedule: Select a schedule to apply the rule. For information on creating schedules, see Scheduling the FortiVoice unit. Caller ID Match: Click New to set the caller ID pattern following Pattern-matching syntax and Pattern-matching examples for this dial plan, and click Create. You can enter an incoming call’s display name string or the caller’s phone number string as the pattern. Click Export to open or save the caller ID match file and Import to browse for a caller ID match file. Caller IDs under this pattern are subject to this plan.
Additional action		Inbound caller ID modification: Select the caller ID modification configuration. For more information on caller ID modification, see Modifying caller IDs. Inbound fallback action: Select the action to take if a caller not in the caller list dialed the DID number mapped to an extension. For some actions, you need to enter the extension, such as Dial voicemail. For information on filtering callers, see Mapping DIDs.
Number Mapping		For adding a number mapping, see Mapping DIDs. Click Export to open or save the number mapping file and Import to browse for a number mapping file.

To configure a fax DID

1. Go to Call Routing > Inbound > DID Mapping.
2. Click New and select Fax.
3. Configure the following and click Create.

GUI field		Description
Rule name		Enter a name for this DID setting.
Enable		Select to activate this DID setting.
Condition		Trunk: Select the trunk used for dialing the DIDs.
Additional action		Inbound fallback action: Select the action to take if a caller not in the caller list dialed the DID number mapped to an extension. For some actions, you need to enter the extension, such as Dial voicemail. For information on filtering callers, see Mapping DIDs.
Number Mapping		For adding a number mapping, see Mapping DIDs. Click Export to open or save the number mapping file and Import to browse for a number mapping file.

Mapping DIDs

You can map a DID number to one extension. You can also map a DID to multiple extensions based on the callers’ phone numbers. For example, calling numbers 123-4567, 123-4568, and 123-4569 can call the DID number 222-1000 to reach extension 1234. Calling numbers 234-4567, 234-4568, and 234-4569 can call the same DID number 222-1000 to reach extension 1265. In both cases, the calling numbers will display on the extension.

If a caller outside the configured caller list dialed the mapped DID number, the FortiVoice unit will react according to the selected fall back action. For details, see Additional action.

To map DIDs

1. Go to Call Routing > Inbound > DID Mapping.
2. Click New.
3. Select a DID type.
4. In Number Mapping, click New.
5. Configure the following:

   GUI field		Description
   DID number		Enter the DID number that you want to map to an extension. The DID number cannot be mapped to more than one extension unless the DID is bundled with a caller number. Otherwise, an error message about duplicate entry appears and the DID mapping configuration cannot be saved.
   Extension		Enter the extension that you want to map to the DID number.
   Description		Enter any notes you have for the mapping.

6. Click Create.