Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

External Systems Configuration Guide

Juniper Networks IDP Series

What is Discovered and Monitored

Protocol Information Discovered Metrics Collected Used For
 Syslog

Event Types

In ADMIN > Device Support > Event Types, search for "juniper_idp" to see the event types associated with this device. 

Rules

There are no predefined rules for this device. 

Reports

There are no predefined reports for this device. 

Configuration

Syslog

FortiSIEM processes events from this device via syslog sent by the device. Configure the device to send syslog to FortiSIEM as directed in the device's product documentation, and FortiSIEM will parse the contents.

  • For Syslog Server, or the server where the syslog should be sent, enter the IP address of your FortiSIEM virtual appliance.
  • For Port, enter 514.
  • Make sure that the syslog type is Common Event Format (CEF). The syslog format should be the same as that shown in the example.

Example Syslog from NSM

<25>Oct 11 14:29:27 10.146.68.68 20101011, 58420089, 2010/10/11 18:29:25, 2010/10/11 18:33:12, global.IDP, 1631, par-real-idp200, 10.146.68.73, traffic, udp port scan in progress, (NULL), (NULL), 161.178.223.221, 0, 0.0.0.0, 0, (NULL), (NULL), 10.248.8.110, 0, 0.0.0.0, 0, udp, global.IDP, 1631, Metro IDP IP / Port Scan Policy, traffic anomalies, 2, accepted, info, yes, 'interface=eth3', (NULL), (NULL), (NULL), 0, 0, 0, 0, 0, 0, 0, 0, no, 25, Not

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Juniper Netscreen IDP
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration

Juniper Networks IDP Series

What is Discovered and Monitored

Protocol Information Discovered Metrics Collected Used For
 Syslog

Event Types

In ADMIN > Device Support > Event Types, search for "juniper_idp" to see the event types associated with this device. 

Rules

There are no predefined rules for this device. 

Reports

There are no predefined reports for this device. 

Configuration

Syslog

FortiSIEM processes events from this device via syslog sent by the device. Configure the device to send syslog to FortiSIEM as directed in the device's product documentation, and FortiSIEM will parse the contents.

  • For Syslog Server, or the server where the syslog should be sent, enter the IP address of your FortiSIEM virtual appliance.
  • For Port, enter 514.
  • Make sure that the syslog type is Common Event Format (CEF). The syslog format should be the same as that shown in the example.

Example Syslog from NSM

<25>Oct 11 14:29:27 10.146.68.68 20101011, 58420089, 2010/10/11 18:29:25, 2010/10/11 18:33:12, global.IDP, 1631, par-real-idp200, 10.146.68.73, traffic, udp port scan in progress, (NULL), (NULL), 161.178.223.221, 0, 0.0.0.0, 0, (NULL), (NULL), 10.248.8.110, 0, 0.0.0.0, 0, udp, global.IDP, 1631, Metro IDP IP / Port Scan Policy, traffic anomalies, 2, accepted, info, yes, 'interface=eth3', (NULL), (NULL), (NULL), 0, 0, 0, 0, 0, 0, 0, 0, no, 25, Not

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Juniper Netscreen IDP
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration