Fortinet black logo

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

External Systems Configuration Guide

Nortel ERS and Passport Switch

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP (V1, V2c)

Host name, software version, Hardware model, Network interfaces,

Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths)

Availability and Performance Monitoring

SNMP (V1, V2c)

Hardware status: Temperature

SNMP (V1, V2c, V3)

Layer 2 port mapping: associating switch ports to directly connected host IP/MAC addresses

Identity and location table; Topology

Event Types

There are no event types defined specifically for this device.

Rules

There are no predefined rules for this device. 

Reports

There are no predefined reports for this device. 

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials 

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Nortel ERS / Nortel Passport
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration

Nortel ERS and Passport Switch

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP (V1, V2c)

Host name, software version, Hardware model, Network interfaces,

Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths)

Availability and Performance Monitoring

SNMP (V1, V2c)

Hardware status: Temperature

SNMP (V1, V2c, V3)

Layer 2 port mapping: associating switch ports to directly connected host IP/MAC addresses

Identity and location table; Topology

Event Types

There are no event types defined specifically for this device.

Rules

There are no predefined rules for this device. 

Reports

There are no predefined reports for this device. 

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials 

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Nortel ERS / Nortel Passport
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration