AP profile

The AP profile defines the radio settings, such as which channels and SSIDs to broadcast.

To configure an AP profile:

1. Go to WiFi & Switch controller > FortiAP Profiles, and +Create New.
2. Complete the following options:

   Name	Provide a name for the profile. We will use Corp_Wireless
   Platform	Select the platform of the AP units you are deploying.
   Indoor / Outdoor	Leave the location at Default (Indoor).
   Country / Region	Adjust if necessary.

3. Define the radio(s):

   We will use two radios to provide both 2.4GHz and 5.0GHz access.

   1. Under Radio 1, set the following options:

      Mode	Access Point
      Radio resource provision	Enable
      Band	2.4GHz, 802.11n/g
      Channels	All
      Transmit power	100%
      SSIDs	Bridge

   2. Under Radio 2, set the following options:

      Mode	Access Point
      Radio resource provision	Enable
      Band	5GHz, 802.11ac/n/a
      Channels	All
      Transmit power	100%
      SSIDs	Bridge

4. Click OK.