Creating a lab to internet policy

To create a firewall policy:

1. Go to Policy & Objects > Firewall Policy, and click Create New.
2. Set the following options, and click OK:

   Name	LAB_to_INTERNET
   Incoming Interface	VLAN21, VLAN31
   Outgoing Interface	WAN1
   Source	IT _LAB_net, ENG_LAB_net
   Destination	!RFC-1918
   Service	ALL
   Schedule	Always
   Action	Accept
   NAT	Use Outgoing Interface Address
   Security Profiles	You may use the same profiles as the above policies, however it may be necessary to adjust some profiles to allow for less restrictions as necessitated by the lab requirements.
   Logging Options	All Sessions