Creating service objects

This section describes how to create the following service objects:

• ENG_SRV1
• ENG_SRV2
• IT_SRV1
• IT_SRV2

To create service objects:

1. Go to Policy & Objects > Services, and click Create New > Service.
2. Complete the following options:

   Name	ENG_SRV1
   Protocol Type	TCP/UDP/SCTP
   Address	192.168.31.1
   Destination Port	TCP, 5678

3. Click OK. The new address object is created.
4. Repeat this procedure until you create all the following service objects:
   • ENG_SRV2

     Name	ENG_SRV2
     Protocol Type	TCP/UDP/SCTP
     Address	192.168.31.1
     Destination Port	TCP, 4678

   • IT_SRV1

     Name	IT_SRV1
     Protocol Type	TCP/UDP/SCTP
     Address	192.168.21.1
     Destination Port	TCP, 8765

   • IT_SRV2

     Name	IT_SRV2
     Protocol Type	TCP/UDP/SCTP
     Address	192.168.21.1
     Destination Port	TCP, 9765

   The address objects are created.

5. Next, create service groups to contain the service objects. See Creating service groups.