SSIDs

We will create SSIDs to support access for the following groups:

• General corporate access (Staff_WiFi)
• IT access (IT_WiFi)
• Engineering access (Engineering_WiFi)

The IT and Engineering SSIDs should only authenticate users who belong to those departments.

To configure SSIDs:

1. Go to WiFi & Switch Controller > SSIDs, and click Create New > SSID.
2. Complete the following options as needed, then click OK to create the SSID named Staff_WiFi.

   Name	Staff_WiFi
   Traffic mode	Bridge
   SSID	Staff_WiFi
   Security mode	WPA2 Enterprise
   Authentication	Local
   User group	Staff
   Optional VLAN ID	70

3. Repeat this procedure to create the following additional SSIDs:

   • IT_WiFi

     Name	IT_WiFi
     Traffic mode	Bridge
     SSID	IT_WiFi
     Security mode	WPA2 Enterprise
     Authentication	Local
     User group	IT
     Optional VLAN ID	20

   • Engineering_WiFi

     Name	Engineering_WiFi
     Traffic mode	Bridge
     SSID	Engineering _WiFi
     Security mode	WPA2 Enterprise
     Authentication	Local
     User group	Engineering
     Optional VLAN ID	30

The SSIDs are created.