config wireless-controller global
Description: Configure wireless controller global settings.
set name {string}
set location {string}
set image-download [enable|disable]
set max-retransmit {integer}
set control-message-offload {option1}, {option2}, ...
set data-ethernet-II [enable|disable]
set link-aggregation [enable|disable]
set mesh-eth-type {integer}
set fiapp-eth-type {integer}
set discovery-mc-addr {ipv4-address-multicast}
set max-clients {integer}
set rogue-scan-mac-adjacency {integer}
set ipsec-base-ip {ipv4-address}
set wtp-share [enable|disable]
set ap-log-server [enable|disable]
set ap-log-server-ip {ipv4-address}
set ap-log-server-port {integer}
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| name | Name of the wireless controller. | string | Maximum length: 35 |
| location | Description of the location of the wireless controller. | string | Maximum length: 35 |
| image-download | Enable/disable WTP image download at join time. enable: Enable WTP image download at join time. disable: Disable WTP image download at join time. |
option | - |
| max-retransmit | Maximum number of tunnel packet retransmissions (0 - 64, default = 3). | integer | Minimum value: 0 Maximum value: 64 |
| control-message-offload | Configure CAPWAP control message data channel offload. ebp-frame: Ekahau blink protocol (EBP) frames. aeroscout-tag: AeroScout tag. ap-list: Rogue AP list. sta-list: Rogue STA list. sta-cap-list: STA capability list. stats: WTP, radio, VAP, and STA statistics. aeroscout-mu: AeroScout Mobile Unit (MU) report. sta-health: STA health log. |
option | - |
| data-ethernet-II | Configure the wireless controller to use Ethernet II or 802.3 frames with 802.3 data tunnel mode (default = disable). enable: Use Ethernet II frames with 802.3 data tunnel mode. disable: Use 802.3 Ethernet frames with 802.3 data tunnel mode. |
option | - |
| link-aggregation | Enable/disable calculating the CAPWAP transmit hash to load balance sessions to link aggregation nodes (default = disable). enable: Enable calculating the CAPWAP transmit hash. disable: Disable calculating the CAPWAP transmit hash. |
option | - |
| mesh-eth-type | Mesh Ethernet identifier included in backhaul packets (0 - 65535, default = 8755). | integer | Minimum value: 8755 Maximum value: 8755 |
| fiapp-eth-type | Ethernet type for Fortinet Inter-Access Point Protocol (IAPP), or IEEE 802.11f, packets (0 - 65535, default = 5252). | integer | Minimum value: 5252 Maximum value: 5252 |
| discovery-mc-addr | Multicast IP address for AP discovery (default = 244.0.1.140). | ipv4-address-multicast | Not Specified |
| max-clients | Maximum number of clients that can connect simultaneously (default = 0, meaning no limitation). | integer | Minimum value: 0 Maximum value: 4294967295 |
| rogue-scan-mac-adjacency | Maximum numerical difference between an AP's Ethernet and wireless MAC values to match for rogue detection (0 - 31, default = 7). | integer | Minimum value: 0 Maximum value: 31 |
| ipsec-base-ip | Base IP address for IPsec VPN tunnels between the access points and the wireless controller (default = 169.254.0.1). | ipv4-address | Not Specified |
| wtp-share | Enable/disable sharing of WTPs between VDOMs. enable: WTP can be shared between all VDOMs. disable: WTP can be used only in its own VDOM. |
option | - |
| ap-log-server | Enable/disable configuring APs or FortiAPs to send log messages to a syslog server (default = disable). enable: Enable AP log server. disable: Disable AP log server. |
option | - |
| ap-log-server-ip | IP address that APs or FortiAPs send log messages to. | ipv4-address | Not Specified |
| ap-log-server-port | Port that APs or FortiAPs send log messages to. | integer | Minimum value: 0 Maximum value: 65535 |
config wireless-controller global
Description: Configure wireless controller global settings.
set name {string}
set location {string}
set image-download [enable|disable]
set max-retransmit {integer}
set control-message-offload {option1}, {option2}, ...
set data-ethernet-II [enable|disable]
set link-aggregation [enable|disable]
set mesh-eth-type {integer}
set fiapp-eth-type {integer}
set discovery-mc-addr {ipv4-address-multicast}
set max-clients {integer}
set rogue-scan-mac-adjacency {integer}
set ipsec-base-ip {ipv4-address}
set wtp-share [enable|disable]
set ap-log-server [enable|disable]
set ap-log-server-ip {ipv4-address}
set ap-log-server-port {integer}
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| name | Name of the wireless controller. | string | Maximum length: 35 |
| location | Description of the location of the wireless controller. | string | Maximum length: 35 |
| image-download | Enable/disable WTP image download at join time. enable: Enable WTP image download at join time. disable: Disable WTP image download at join time. |
option | - |
| max-retransmit | Maximum number of tunnel packet retransmissions (0 - 64, default = 3). | integer | Minimum value: 0 Maximum value: 64 |
| control-message-offload | Configure CAPWAP control message data channel offload. ebp-frame: Ekahau blink protocol (EBP) frames. aeroscout-tag: AeroScout tag. ap-list: Rogue AP list. sta-list: Rogue STA list. sta-cap-list: STA capability list. stats: WTP, radio, VAP, and STA statistics. aeroscout-mu: AeroScout Mobile Unit (MU) report. sta-health: STA health log. |
option | - |
| data-ethernet-II | Configure the wireless controller to use Ethernet II or 802.3 frames with 802.3 data tunnel mode (default = disable). enable: Use Ethernet II frames with 802.3 data tunnel mode. disable: Use 802.3 Ethernet frames with 802.3 data tunnel mode. |
option | - |
| link-aggregation | Enable/disable calculating the CAPWAP transmit hash to load balance sessions to link aggregation nodes (default = disable). enable: Enable calculating the CAPWAP transmit hash. disable: Disable calculating the CAPWAP transmit hash. |
option | - |
| mesh-eth-type | Mesh Ethernet identifier included in backhaul packets (0 - 65535, default = 8755). | integer | Minimum value: 8755 Maximum value: 8755 |
| fiapp-eth-type | Ethernet type for Fortinet Inter-Access Point Protocol (IAPP), or IEEE 802.11f, packets (0 - 65535, default = 5252). | integer | Minimum value: 5252 Maximum value: 5252 |
| discovery-mc-addr | Multicast IP address for AP discovery (default = 244.0.1.140). | ipv4-address-multicast | Not Specified |
| max-clients | Maximum number of clients that can connect simultaneously (default = 0, meaning no limitation). | integer | Minimum value: 0 Maximum value: 4294967295 |
| rogue-scan-mac-adjacency | Maximum numerical difference between an AP's Ethernet and wireless MAC values to match for rogue detection (0 - 31, default = 7). | integer | Minimum value: 0 Maximum value: 31 |
| ipsec-base-ip | Base IP address for IPsec VPN tunnels between the access points and the wireless controller (default = 169.254.0.1). | ipv4-address | Not Specified |
| wtp-share | Enable/disable sharing of WTPs between VDOMs. enable: WTP can be shared between all VDOMs. disable: WTP can be used only in its own VDOM. |
option | - |
| ap-log-server | Enable/disable configuring APs or FortiAPs to send log messages to a syslog server (default = disable). enable: Enable AP log server. disable: Disable AP log server. |
option | - |
| ap-log-server-ip | IP address that APs or FortiAPs send log messages to. | ipv4-address | Not Specified |
| ap-log-server-port | Port that APs or FortiAPs send log messages to. | integer | Minimum value: 0 Maximum value: 65535 |