Fortinet white logo
Fortinet white logo

CLI Reference

system probe-response

Configure system probe response.

  config system probe-response
      Description: Configure system probe response.
      set port {integer}
      set http-probe-value {string}
      set ttl-mode [reinit|decrease|...]
      set mode [none|http-probe|...]
      set security-mode [none|authentication]
      set password {password}
      set timeout {integer}
  end

config system probe-response

Parameter Name Description Type Size
port Port number to response. integer Minimum value: 1 Maximum value: 65535
http-probe-value Value to respond to the monitoring server. string Maximum length: 1024
ttl-mode Mode for TWAMP packet TTL modification.
reinit: Reinitialize TTL.
decrease: Decrease TTL.
retain: Retain TTL.
option -
mode SLA response mode.
none: Disable probe.
http-probe: HTTP probe.
twamp: Two way active measurement protocol.
option -
security-mode Twamp respondor security mode.
none: Unauthenticated mode.
authentication: Authenticated mode.
option -
password Twamp respondor password in authentication mode password Not Specified
timeout An inactivity timer for a twamp test session. integer Minimum value: 10 Maximum value: 3600

system probe-response

Configure system probe response.

  config system probe-response
      Description: Configure system probe response.
      set port {integer}
      set http-probe-value {string}
      set ttl-mode [reinit|decrease|...]
      set mode [none|http-probe|...]
      set security-mode [none|authentication]
      set password {password}
      set timeout {integer}
  end

config system probe-response

Parameter Name Description Type Size
port Port number to response. integer Minimum value: 1 Maximum value: 65535
http-probe-value Value to respond to the monitoring server. string Maximum length: 1024
ttl-mode Mode for TWAMP packet TTL modification.
reinit: Reinitialize TTL.
decrease: Decrease TTL.
retain: Retain TTL.
option -
mode SLA response mode.
none: Disable probe.
http-probe: HTTP probe.
twamp: Two way active measurement protocol.
option -
security-mode Twamp respondor security mode.
none: Unauthenticated mode.
authentication: Authenticated mode.
option -
password Twamp respondor password in authentication mode password Not Specified
timeout An inactivity timer for a twamp test session. integer Minimum value: 10 Maximum value: 3600