Fortinet Document Library

Version:

Version:

Version:


Table of Contents

CLI Reference

Copy Link

Configure NP6 IPsec engine status monitoring.

  config monitoring np6-ipsec-engine
      Description: Configure NP6 IPsec engine status monitoring.
      set status [enable|disable]
      set interval {integer}
      set threshold {user}
  end

config monitoring np6-ipsec-engine

Parameter Name Description Type Size
status Enable/disable NP6 IPsec engine status monitoring.
enable: Enable setting.
disable: Disable setting.
option -
interval IPsec engine status check interval (1 - 60 seconds, default = 1). integer Minimum value: 1 Maximum value: 60
threshold IPsec engine status check threshold (x x x x x x x x, 8 integers from to , default = 15 15 12 12 8 8 5 5). Example: Log is generated if IPsec engine 0 is busy each of every 15 consecutive interval checks. user Not Specified

Configure NP6 IPsec engine status monitoring.

  config monitoring np6-ipsec-engine
      Description: Configure NP6 IPsec engine status monitoring.
      set status [enable|disable]
      set interval {integer}
      set threshold {user}
  end

config monitoring np6-ipsec-engine

Parameter Name Description Type Size
status Enable/disable NP6 IPsec engine status monitoring.
enable: Enable setting.
disable: Disable setting.
option -
interval IPsec engine status check interval (1 - 60 seconds, default = 1). integer Minimum value: 1 Maximum value: 60
threshold IPsec engine status check threshold (x x x x x x x x, 8 integers from to , default = 15 15 12 12 8 8 5 5). Example: Log is generated if IPsec engine 0 is busy each of every 15 consecutive interval checks. user Not Specified