CLI Reference

alertemail
- alertemail setting
antivirus
- antivirus heuristic
- antivirus profile
- antivirus quarantine
- antivirus settings
application
- application custom
- application group
- application list
- application name
- application rule-settings
authentication
- authentication rule
- authentication scheme
- authentication setting
certificate
- certificate ca
- certificate crl
- certificate local
- certificate remote
cifs
- cifs domain-controller
- cifs profile
dlp
- dlp filepattern
- dlp fp-doc-source
- dlp sensitivity
- dlp sensor
- dlp settings
dnsfilter
- dnsfilter domain-filter
- dnsfilter profile
emailfilter
- emailfilter bwl
- emailfilter bword
- emailfilter dnsbl
- emailfilter fortishield
- emailfilter iptrust
- emailfilter mheader
- emailfilter options
- emailfilter profile
endpoint-control
- endpoint-control client
- endpoint-control fctems
- endpoint-control settings
extender-controller
- extender-controller extender
firewall
- firewall DoS-policy
- firewall DoS-policy6
- firewall acl
- firewall acl6
- firewall address
- firewall address6
- firewall address6-template
- firewall addrgrp
- firewall addrgrp6
- firewall auth-portal
- firewall central-snat-map
- firewall consolidated policy
- firewall dnstranslation
- firewall identity-based-route
- firewall interface-policy
- firewall interface-policy6
- firewall internet-service
- firewall internet-service-addition
- firewall internet-service-custom
- firewall internet-service-custom-group
- firewall internet-service-definition
- firewall internet-service-extension
- firewall internet-service-group
- firewall ip-translation
- firewall ipmacbinding setting
- firewall ipmacbinding table
- firewall ippool
- firewall ippool6
- firewall ipv6-eh-filter
- firewall ldb-monitor
- firewall local-in-policy
- firewall local-in-policy6
- firewall multicast-address
- firewall multicast-address6
- firewall multicast-policy
- firewall multicast-policy6
- firewall policy
- firewall policy46
- firewall policy6
- firewall policy64
- firewall profile-group
- firewall profile-protocol-options
- firewall proxy-address
- firewall proxy-addrgrp
- firewall proxy-policy
- firewall schedule group
- firewall schedule onetime
- firewall schedule recurring
- firewall security-policy
- firewall service category
- firewall service custom
- firewall service group
- firewall shaper per-ip-shaper
- firewall shaper traffic-shaper
- firewall shaping-policy
- firewall shaping-profile
- firewall sniffer
- firewall ssh host-key
- firewall ssh local-ca
- firewall ssh local-key
- firewall ssh setting
- firewall ssl setting
- firewall ssl-server
- firewall ssl-ssh-profile
- firewall traffic-class
- firewall ttl-policy
- firewall vip
- firewall vip46
- firewall vip6
- firewall vip64
- firewall vipgrp
- firewall vipgrp46
- firewall vipgrp6
- firewall vipgrp64
- firewall wildcard-fqdn custom
- firewall wildcard-fqdn group
ftp-proxy
- ftp-proxy explicit
icap
- icap profile
- icap server
ips
- ips custom
- ips decoder
- ips global
- ips rule
- ips rule-settings
- ips sensor
- ips settings
log
- log custom-field
- log disk filter
- log disk setting
- log eventfilter
- log fortianalyzer filter
- log fortianalyzer override-filter
- log fortianalyzer override-setting
- log fortianalyzer setting
- log fortianalyzer-cloud filter
- log fortianalyzer-cloud override-filter
- log fortianalyzer-cloud override-setting
- log fortianalyzer-cloud setting
- log fortianalyzer2 filter
- log fortianalyzer2 override-filter
- log fortianalyzer2 override-setting
- log fortianalyzer2 setting
- log fortianalyzer3 filter
- log fortianalyzer3 override-filter
- log fortianalyzer3 override-setting
- log fortianalyzer3 setting
- log fortiguard filter
- log fortiguard override-filter
- log fortiguard override-setting
- log fortiguard setting
- log gui-display
- log memory filter
- log memory global-setting
- log memory setting
- log null-device filter
- log null-device setting
- log setting
- log syslogd filter
- log syslogd override-filter
- log syslogd override-setting
- log syslogd setting
- log syslogd2 filter
- log syslogd2 override-filter
- log syslogd2 override-setting
- log syslogd2 setting
- log syslogd3 filter
- log syslogd3 override-filter
- log syslogd3 override-setting
- log syslogd3 setting
- log syslogd4 filter
- log syslogd4 override-filter
- log syslogd4 override-setting
- log syslogd4 setting
- log threat-weight
- log webtrends filter
- log webtrends setting
monitoring
- monitoring np6-ipsec-engine
report
- report chart
- report dataset
- report layout
- report setting
- report style
- report theme
router
- router access-list
- router access-list6
- router aspath-list
- router auth-path
- router bfd
- router bfd6
- router bgp
- router community-list
- router isis
- router key-chain
- router multicast
- router multicast-flow
- router multicast6
- router ospf
- router ospf6
- router policy
- router policy6
- router prefix-list
- router prefix-list6
- router rip
- router ripng
- router route-map
- router setting
- router static
- router static6
ssh-filter
- ssh-filter profile
switch-controller
- switch-controller 802-1X-settings
- switch-controller auto-config custom
- switch-controller auto-config default
- switch-controller auto-config policy
- switch-controller custom-command
- switch-controller flow-tracking
- switch-controller global
- switch-controller igmp-snooping
- switch-controller lldp-profile
- switch-controller lldp-settings
- switch-controller location
- switch-controller managed-switch
- switch-controller network-monitor-settings
- switch-controller qos dot1p-map
- switch-controller qos ip-dscp-map
- switch-controller qos qos-policy
- switch-controller qos queue-policy
- switch-controller quarantine
- switch-controller remote-log
- switch-controller security-policy 802-1X
- switch-controller security-policy captive-portal
- switch-controller security-policy local-access
- switch-controller sflow
- switch-controller snmp-community
- switch-controller snmp-sysinfo
- switch-controller snmp-trap-threshold
- switch-controller snmp-user
- switch-controller storm-control
- switch-controller storm-control-policy
- switch-controller stp-instance
- switch-controller stp-settings
- switch-controller switch-group
- switch-controller switch-interface-tag
- switch-controller switch-log
- switch-controller switch-profile
- switch-controller system
- switch-controller traffic-policy
- switch-controller traffic-sniffer
- switch-controller virtual-port-pool
- switch-controller vlan
system
- system 3g-modem custom
- system accprofile
- system admin
- system alarm
- system alias
- system api-user
- system arp-table
- system auto-install
- system auto-script
- system automation-action
- system automation-destination
- system automation-stitch
- system automation-trigger
- system autoupdate push-update
- system autoupdate schedule
- system autoupdate tunneling
- system central-management
- system cluster-sync
- system console
- system csf
- system custom-language
- system ddns
- system dedicated-mgmt
- system dhcp server
- system dhcp6 server
- system dns
- system dns-database
- system dns-server
- system dscp-based-priority
- system email-server
- system external-resource
- system fips-cc
- system fm
- system fortiguard
- system fortimanager
- system fortisandbox
- system fsso-polling
- system ftm-push
- system geneve
- system geoip-override
- system global
- system gre-tunnel
- system ha
- system ha-monitor
- system interface
- system ipip-tunnel
- system ips-urlfilter-dns
- system ips-urlfilter-dns6
- system ipsec-aggregate
- system ipv6-neighbor-cache
- system ipv6-tunnel
- system isf-queue-profile
- system link-monitor
- system lldp network-policy
- system lte-modem
- system mac-address-table
- system management-tunnel
- system mobile-tunnel
- system modem
- system nat64
- system nd-proxy
- system netflow
- system network-visibility
- system np6
- system npu
- system ntp
- system object-tagging
- system password-policy
- system password-policy-guest-admin
- system pppoe-interface
- system probe-response
- system proxy-arp
- system ptp
- system replacemsg admin
- system replacemsg alertmail
- system replacemsg auth
- system replacemsg device-detection-portal
- system replacemsg fortiguard-wf
- system replacemsg ftp
- system replacemsg http
- system replacemsg icap
- system replacemsg mail
- system replacemsg nac-quar
- system replacemsg nntp
- system replacemsg spam
- system replacemsg sslvpn
- system replacemsg traffic-quota
- system replacemsg utm
- system replacemsg webproxy
- system replacemsg-group
- system replacemsg-image
- system resource-limits
- system saml
- system sdn-connector
- system session-helper
- system session-ttl
- system settings
- system sflow
- system sit-tunnel
- system smc-ntp
- system sms-server
- system snmp community
- system snmp sysinfo
- system snmp user
- system speed-test-server
- system sso-admin
- system storage
- system switch-interface
- system tos-based-priority
- system vdom
- system vdom-dns
- system vdom-exception
- system vdom-link
- system vdom-netflow
- system vdom-property
- system vdom-radius-server
- system vdom-sflow
- system virtual-wan-link
- system virtual-wire-pair
- system vxlan
- system wccp
- system zone
user
- user adgrp
- user device
- user device-group
- user domain-controller
- user exchange
- user fortitoken
- user fsso
- user fsso-polling
- user group
- user krb-keytab
- user ldap
- user local
- user password-policy
- user peer
- user peergrp
- user pop3
- user quarantine
- user radius
- user saml
- user security-exempt-list
- user setting
- user tacacs+
voip
- voip profile
vpn
- vpn certificate ca
- vpn certificate crl
- vpn certificate local
- vpn certificate ocsp-server
- vpn certificate remote
- vpn certificate setting
- vpn ipsec concentrator
- vpn ipsec forticlient
- vpn ipsec manualkey
- vpn ipsec manualkey-interface
- vpn ipsec phase1
- vpn ipsec phase1-interface
- vpn ipsec phase2
- vpn ipsec phase2-interface
- vpn l2tp
- vpn ocvpn
- vpn pptp
- vpn ssl settings
- vpn ssl web host-check-software
- vpn ssl web portal
- vpn ssl web realm
- vpn ssl web user-bookmark
- vpn ssl web user-group-bookmark
waf
- waf main-class
- waf profile
- waf signature
- waf sub-class
wanopt
- wanopt auth-group
- wanopt cache-service
- wanopt content-delivery-network-rule
- wanopt peer
- wanopt profile
- wanopt remote-storage
- wanopt settings
- wanopt webcache
web-proxy
- web-proxy debug-url
- web-proxy explicit
- web-proxy forward-server
- web-proxy forward-server-group
- web-proxy global
- web-proxy profile
- web-proxy url-match
- web-proxy wisp
webfilter
- webfilter content
- webfilter content-header
- webfilter fortiguard
- webfilter ftgd-local-cat
- webfilter ftgd-local-rating
- webfilter ips-urlfilter-cache-setting
- webfilter ips-urlfilter-setting
- webfilter ips-urlfilter-setting6
- webfilter override
- webfilter profile
- webfilter search-engine
- webfilter urlfilter
wireless-controller
- wireless-controller address
- wireless-controller addrgrp
- wireless-controller ap-status
- wireless-controller ble-profile
- wireless-controller bonjour-profile
- wireless-controller global
- wireless-controller hotspot20 anqp-3gpp-cellular
- wireless-controller hotspot20 anqp-ip-address-type
- wireless-controller hotspot20 anqp-nai-realm
- wireless-controller hotspot20 anqp-network-auth-type
- wireless-controller hotspot20 anqp-roaming-consortium
- wireless-controller hotspot20 anqp-venue-name
- wireless-controller hotspot20 h2qp-conn-capability
- wireless-controller hotspot20 h2qp-operator-name
- wireless-controller hotspot20 h2qp-osu-provider
- wireless-controller hotspot20 h2qp-wan-metric
- wireless-controller hotspot20 hs-profile
- wireless-controller hotspot20 icon
- wireless-controller hotspot20 qos-map
- wireless-controller inter-controller
- wireless-controller log
- wireless-controller qos-profile
- wireless-controller region
- wireless-controller setting
- wireless-controller snmp
- wireless-controller timers
- wireless-controller utm-profile
- wireless-controller vap
- wireless-controller vap-group
- wireless-controller wag-profile
- wireless-controller wids-profile
- wireless-controller wtp
- wireless-controller wtp-group
- wireless-controller wtp-profile

Home FortiGate / FortiOS 6.2.3 CLI Reference

6.2.3

system global

Configure global attributes.

  config system global
      Description: Configure global attributes.
      set language [english|french|...]
      set gui-ipv6 [enable|disable]
      set gui-certificates [enable|disable]
      set gui-custom-language [enable|disable]
      set gui-wireless-opensecurity [enable|disable]
      set gui-display-hostname [enable|disable]
      set gui-fortisandbox-cloud [enable|disable]
      set gui-lines-per-page {integer}
      set admin-https-ssl-versions {option1}, {option2}, ...
      set admintimeout {integer}
      set admin-console-timeout {integer}
      set ssd-trim-freq [never|hourly|...]
      set ssd-trim-hour {integer}
      set ssd-trim-min {integer}
      set ssd-trim-weekday [sunday|monday|...]
      set ssd-trim-date {integer}
      set admin-concurrent [enable|disable]
      set admin-lockout-threshold {integer}
      set admin-lockout-duration {integer}
      set refresh {integer}
      set interval {integer}
      set failtime {integer}
      set daily-restart [enable|disable]
      set restart-time {user}
      set radius-port {integer}
      set admin-login-max {integer}
      set remoteauthtimeout {integer}
      set ldapconntimeout {integer}
      set batch-cmdb [enable|disable]
      set max-dlpstat-memory {integer}
      set multi-factor-authentication [optional|mandatory]
      set ssl-min-proto-version [SSLv3|TLSv1|...]
      set autorun-log-fsck [enable|disable]
      set dst [enable|disable]
      set timezone [01|02|...]
      set traffic-priority [tos|dscp]
      set traffic-priority-level [low|medium|...]
      set anti-replay [disable|loose|...]
      set send-pmtu-icmp [enable|disable]
      set honor-df [enable|disable]
      set revision-image-auto-backup [enable|disable]
      set revision-backup-on-logout [enable|disable]
      set management-vdom {string}
      set hostname {string}
      set gui-allow-default-hostname [enable|disable]
      set alias {string}
      set strong-crypto [enable|disable]
      set ssh-cbc-cipher [enable|disable]
      set ssh-hmac-md5 [enable|disable]
      set ssh-kex-sha1 [enable|disable]
      set ssh-mac-weak [enable|disable]
      set ssl-static-key-ciphers [enable|disable]
      set snat-route-change [enable|disable]
      set cli-audit-log [enable|disable]
      set dh-params [1024|1536|...]
      set fds-statistics [enable|disable]
      set fds-statistics-period {integer}
      set tcp-option [enable|disable]
      set lldp-transmission [enable|disable]
      set lldp-reception [enable|disable]
      set proxy-auth-timeout {integer}
      set proxy-re-authentication-mode [session|traffic|...]
      set proxy-auth-lifetime [enable|disable]
      set proxy-auth-lifetime-timeout {integer}
      set sys-perf-log-interval {integer}
      set check-protocol-header [loose|strict]
      set vip-arp-range [unlimited|restricted]
      set reset-sessionless-tcp [enable|disable]
      set allow-traffic-redirect [enable|disable]
      set strict-dirty-session-check [enable|disable]
      set tcp-halfclose-timer {integer}
      set tcp-halfopen-timer {integer}
      set tcp-timewait-timer {integer}
      set udp-idle-timer {integer}
      set block-session-timer {integer}
      set ip-src-port-range {user}
      set pre-login-banner [enable|disable]
      set post-login-banner [disable|enable]
      set tftp [enable|disable]
      set av-failopen [pass|off|...]
      set av-failopen-session [enable|disable]
      set memory-use-threshold-extreme {integer}
      set memory-use-threshold-red {integer}
      set memory-use-threshold-green {integer}
      set cpu-use-threshold {integer}
      set check-reset-range [strict|disable]
      set vdom-mode [no-vdom|split-vdom|...]
      set long-vdom-name [enable|disable]
      set admin-port {integer}
      set admin-sport {integer}
      set admin-https-redirect [enable|disable]
      set admin-hsts-max-age {integer}
      set admin-ssh-password [enable|disable]
      set admin-restrict-local [enable|disable]
      set admin-ssh-port {integer}
      set admin-ssh-grace-time {integer}
      set admin-ssh-v1 [enable|disable]
      set admin-telnet [enable|disable]
      set admin-telnet-port {integer}
      set default-service-source-port {user}
      set admin-maintainer [enable|disable]
      set admin-server-cert {string}
      set user-server-cert {string}
      set admin-https-pki-required [enable|disable]
      set wifi-certificate {string}
      set wifi-ca-certificate {string}
      set auth-http-port {integer}
      set auth-https-port {integer}
      set auth-keepalive [enable|disable]
      set policy-auth-concurrent {integer}
      set auth-session-limit [block-new|logout-inactive]
      set auth-cert {string}
      set clt-cert-req [enable|disable]
      set fortiservice-port {integer}
      set cfg-save [automatic|manual|...]
      set cfg-revert-timeout {integer}
      set reboot-upon-config-restore [enable|disable]
      set admin-scp [enable|disable]
      set security-rating-result-submission [enable|disable]
      set security-rating-run-on-schedule [enable|disable]
      set wireless-controller [enable|disable]
      set wireless-controller-port {integer}
      set fortiextender-data-port {integer}
      set fortiextender [disable|enable]
      set fortiextender-vlan-mode [enable|disable]
      set switch-controller [disable|enable]
      set switch-controller-reserved-network {ipv4-classnet}
      set dnsproxy-worker-count {integer}
      set url-filter-count {integer}
      set proxy-worker-count {integer}
      set scanunit-count {integer}
      set proxy-kxp-hardware-acceleration [disable|enable]
      set proxy-cipher-hardware-acceleration [disable|enable]
      set fgd-alert-subscription {option1}, {option2}, ...
      set ipsec-hmac-offload [enable|disable]
      set ipv6-accept-dad {integer}
      set ipv6-allow-anycast-probe [enable|disable]
      set csr-ca-attribute [enable|disable]
      set wimax-4g-usb [enable|disable]
      set cert-chain-max {integer}
      set sslvpn-max-worker-count {integer}
      set sslvpn-kxp-hardware-acceleration [enable|disable]
      set sslvpn-cipher-hardware-acceleration [enable|disable]
      set sslvpn-plugin-version-check [enable|disable]
      set two-factor-ftk-expiry {integer}
      set two-factor-email-expiry {integer}
      set two-factor-sms-expiry {integer}
      set two-factor-fac-expiry {integer}
      set two-factor-ftm-expiry {integer}
      set per-user-bwl [enable|disable]
      set wad-worker-count {integer}
      set wad-csvc-cs-count {integer}
      set wad-csvc-db-count {integer}
      set wad-source-affinity [disable|enable]
      set wad-memory-change-granularity {integer}
      set login-timestamp [enable|disable]
      set miglogd-children {integer}
      set special-file-23-support [disable|enable]
      set log-uuid-policy [enable|disable]
      set log-uuid-address [enable|disable]
      set log-ssl-connection [enable|disable]
      set arp-max-entry {integer}
      set av-affinity {string}
      set wad-affinity {string}
      set ips-affinity {string}
      set miglog-affinity {string}
      set url-filter-affinity {string}
      set ndp-max-entry {integer}
      set br-fdb-max-entry {integer}
      set max-route-cache-size {integer}
      set ipsec-asic-offload [enable|disable]
      set ipsec-soft-dec-async [enable|disable]
      set device-idle-timeout {integer}
      set device-identification-active-scan-delay {integer}
      set gui-device-latitude {string}
      set gui-device-longitude {string}
      set private-data-encryption [disable|enable]
      set auto-auth-extension-device [enable|disable]
      set gui-theme [green|neutrino|...]
      set gui-date-format [yyyy/MM/dd|dd/MM/yyyy|...]
      set gui-date-time-source [system|browser]
      set igmp-state-limit {integer}
      set cloud-communication [enable|disable]
      set fec-port {integer}
      set fortitoken-cloud [enable|disable]
  end

config system global

Parameter Name	Description	Type	Size
language	GUI display language. english: English. french: French. spanish: Spanish. portuguese: Portuguese. japanese: Japanese. trach: Traditional Chinese. simch: Simplified Chinese. korean: Korean.	option	-
gui-ipv6	Enable/disable IPv6 settings on the GUI. enable: Display the feature in GUI. disable: Do not display the feature in GUI.	option	-
gui-certificates	Enable/disable the System > Certificate GUI page, allowing you to add and configure certificates from the GUI. enable: Display the feature in GUI. disable: Do not display the feature in GUI.	option	-
gui-custom-language	Enable/disable custom languages in GUI. enable: Display the feature in GUI. disable: Do not display the feature in GUI.	option	-
gui-wireless-opensecurity	Enable/disable wireless open security option on the GUI. enable: Display the feature in GUI. disable: Do not display the feature in GUI.	option	-
gui-display-hostname	Enable/disable displaying the FortiGate's hostname on the GUI login page. enable: Display the feature in GUI. disable: Do not display the feature in GUI.	option	-
gui-fortisandbox-cloud	Enable/disable displaying FortiSandbox Cloud on the GUI. enable: Display the feature in GUI. disable: Do not display the feature in GUI.	option	-
gui-lines-per-page	Number of lines to display per page for web administration.	integer	Minimum value: 20 Maximum value: 1000
admin-https-ssl-versions	Allowed TLS versions for web administration. tlsv1-1: TLS 1.1. tlsv1-2: TLS 1.2. tlsv1-3: TLS 1.3.	option	-
admintimeout	Number of minutes before an idle administrator session times out (5 - 480 minutes (8 hours), default = 5). A shorter idle timeout is more secure.	integer	Minimum value: 1 Maximum value: 480
admin-console-timeout	Console login timeout that overrides the admintimeout value. (15 - 300 seconds) (15 seconds to 5 minutes). 0 the default, disables this timeout.	integer	Minimum value: 15 Maximum value: 300
ssd-trim-freq	How often to run SSD Trim (default = weekly). SSD Trim prevents SSD drive data loss by finding and isolating errors. never: Never Run SSD Trim. hourly: Run SSD Trim Hourly. daily: Run SSD Trim Daily. weekly: Run SSD Trim Weekly. monthly: Run SSD Trim Monthly.	option	-
ssd-trim-hour	Hour of the day on which to run SSD Trim (0 - 23, default = 1).	integer	Minimum value: 0 Maximum value: 23
ssd-trim-min	Minute of the hour on which to run SSD Trim (0 - 59, 60 for random).	integer	Minimum value: 0 Maximum value: 60
ssd-trim-weekday	Day of week to run SSD Trim. sunday: Sunday monday: Monday tuesday: Tuesday wednesday: Wednesday thursday: Thursday friday: Friday saturday: Saturday	option	-
ssd-trim-date	Date within a month to run ssd trim.	integer	Minimum value: 1 Maximum value: 31
admin-concurrent	Enable/disable concurrent administrator logins. (Use policy-auth-concurrent for firewall authenticated users.) enable: Enable admin concurrent login. disable: Disable admin concurrent login.	option	-
admin-lockout-threshold	Number of failed login attempts before an administrator account is locked out for the admin-lockout-duration.	integer	Minimum value: 1 Maximum value: 10
admin-lockout-duration	Amount of time in seconds that an administrator account is locked out after reaching the admin-lockout-threshold for repeated failed login attempts.	integer	Minimum value: 1 Maximum value: 2147483647
refresh	Statistics refresh interval in GUI.	integer	Minimum value: 0 Maximum value: 4294967295
interval	Dead gateway detection interval.	integer	Minimum value: 0 Maximum value: 4294967295
failtime	Fail-time for server lost.	integer	Minimum value: 0 Maximum value: 4294967295
daily-restart	Enable/disable daily restart of FortiGate unit. Use the restart-time option to set the time of day for the restart. enable: Enable daily reboot of the FortiGate. disable: Disable daily reboot of the FortiGate.	option	-
restart-time	Daily restart time (hh:mm).	user	Not Specified
radius-port	RADIUS service port number.	integer	Minimum value: 1 Maximum value: 65535
admin-login-max	Maximum number of administrators who can be logged in at the same time (1 - 100, default = 100)	integer	Minimum value: 1 Maximum value: 100
remoteauthtimeout	Number of seconds that the FortiGate waits for responses from remote RADIUS, LDAP, or TACACS+ authentication servers. (0-300 sec, default = 5, 0 means no timeout).	integer	Minimum value: 1 Maximum value: 300
ldapconntimeout	Global timeout for connections with remote LDAP servers in milliseconds (1 - 300000, default 500).	integer	Minimum value: 1 Maximum value: 300000
batch-cmdb	Enable/disable batch mode, allowing you to enter a series of CLI commands that will execute as a group once they are loaded. enable: Enable batch mode to execute in CMDB server. disable: Disable batch mode to execute in CMDB server.	option	-
max-dlpstat-memory	Maximum DLP stat memory (0 - 4294967295).	integer	Not Specified
multi-factor-authentication	Enforce all login methods to require an additional authentication factor (default = optional). optional: Do not enforce all login methods to require an additional authentication factor (controlled by user settings). mandatory: Enforce all login methods to require an additional authentication factor.	option	-
ssl-min-proto-version	Minimum supported protocol version for SSL/TLS connections (default = TLSv1.2). SSLv3: SSLv3. TLSv1: TLSv1. TLSv1-1: TLSv1.1. TLSv1-2: TLSv1.2. TLSv1-3: TLSv1.3.	option	-
autorun-log-fsck	Enable/disable automatic log partition check after ungraceful shutdown. enable: Enable automatic log partition check after ungraceful shutdown. disable: Disable automatic log partition check after ungraceful shutdown.	option	-
dst	Enable/disable daylight saving time. enable: Enable daylight saving time. disable: Disable daylight saving time.	option	-
timezone
traffic-priority	Choose Type of Service (ToS) or Differentiated Services Code Point (DSCP) for traffic prioritization in traffic shaping. tos: IP TOS. dscp: DSCP (DiffServ) DS.	option	-
traffic-priority-level	Default system-wide level of priority for traffic prioritization. low: Low priority. medium: Medium priority. high: High priority.	option	-
anti-replay	Level of checking for packet replay and TCP sequence checking. disable: Disable anti-replay check. loose: Loose anti-replay check. strict: Strict anti-replay check.	option	-
send-pmtu-icmp	Enable/disable sending of path maximum transmission unit (PMTU) - ICMP destination unreachable packet and to support PMTUD protocol on your network to reduce fragmentation of packets. enable: Enable sending of PMTU ICMP destination unreachable packet. disable: Disable sending of PMTU ICMP destination unreachable packet.	option	-
honor-df	Enable/disable honoring of Don't-Fragment (DF) flag. enable: Enable honoring of Don't-Fragment flag. disable: Disable honoring of Don't-Fragment flag.	option	-
revision-image-auto-backup	Enable/disable back-up of the latest configuration revision after the firmware is upgraded. enable: Enable revision image backup automatically when upgrading image. disable: Disable revision image backup automatically when upgrading image.	option	-
revision-backup-on-logout	Enable/disable back-up of the latest configuration revision when an administrator logs out of the CLI or GUI. enable: Enable revision config backup automatically when logout. disable: Disable revision config backup automatically when logout.	option	-
management-vdom	Management virtual domain name.	string	Maximum length: 31
hostname	FortiGate unit's hostname. Most models will truncate names longer than 24 characters. Some models support hostnames up to 35 characters.	string	Maximum length: 35
gui-allow-default-hostname	Enable/disable the GUI warning about using a default hostname enable: Stop the warning in the GUI. disable: Show the warning in the GUI.	option	-
alias	Alias for your FortiGate unit.	string	Maximum length: 35
strong-crypto	Enable to use strong encryption and only allow strong ciphers (AES, 3DES) and digest (SHA1) for HTTPS/SSH/TLS/SSL functions. enable: Enable strong crypto for HTTPS/SSH/TLS/SSL. disable: Disable strong crypto for HTTPS/SSH/TLS/SSL.	option	-
ssh-cbc-cipher	Enable/disable CBC cipher for SSH access. enable: Enable CBC cipher for SSH access. disable: Disable CBC cipher for SSH access.	option	-
ssh-hmac-md5	Enable/disable HMAC-MD5 for SSH access. enable: Enable HMAC-MD5 for SSH access. disable: Disable HMAC-MD5 for SSH access.	option	-
ssh-kex-sha1	Enable/disable SHA1 key exchange for SSH access. enable: Enable SHA1 for SSH key exchanges. disable: Disable SHA1 for SSH key exchanges.	option	-
ssh-mac-weak	Enable/disable HMAC-SHA1 and UMAC-64-ETM for SSH access. enable: Enable HMAC-SHA1 and UMAC-64-ETM for SSH access. disable: Disable HMAC-SHA1 and UMAC-64-ETM for SSH access.	option	-
ssl-static-key-ciphers	Enable/disable static key ciphers in SSL/TLS connections (e.g. AES128-SHA, AES256-SHA, AES128-SHA256, AES256-SHA256). enable: Enable static key ciphers in SSL/TLS connections. disable: Disable static key ciphers in SSL/TLS connections.	option	-
snat-route-change	Enable/disable the ability to change the static NAT route. enable: Enable SNAT route change. disable: Disable SNAT route change.	option	-
cli-audit-log	Enable/disable CLI audit log. enable: Enable CLI audit log. disable: Disable CLI audit log.	option	-
dh-params	Number of bits to use in the Diffie-Hellman exchange for HTTPS/SSH protocols. 1024: 1024 bits. 1536: 1536 bits. 2048: 2048 bits. 3072: 3072 bits. 4096: 4096 bits. 6144: 6144 bits. 8192: 8192 bits.	option	-
fds-statistics	Enable/disable sending IPS, Application Control, and AntiVirus data to FortiGuard. This data is used to improve FortiGuard services and is not shared with external parties and is protected by Fortinet's privacy policy. enable: Enable FortiGuard statistics. disable: Disable FortiGuard statistics.	option	-
fds-statistics-period	FortiGuard statistics collection period in minutes. (1 - 1440 min (1 min to 24 hours), default = 60).	integer	Minimum value: 1 Maximum value: 1440
tcp-option	Enable SACK, timestamp and MSS TCP options. enable: Enable TCP option. disable: Disable TCP option.	option	-
lldp-transmission	Enable/disable Link Layer Discovery Protocol (LLDP) transmission. enable: Enable transmission of Link Layer Discovery Protocol (LLDP). disable: Disable transmission of Link Layer Discovery Protocol (LLDP).	option	-
lldp-reception	Enable/disable Link Layer Discovery Protocol (LLDP) reception. enable: Enable reception of Link Layer Discovery Protocol (LLDP). disable: Disable reception of Link Layer Discovery Protocol (LLDP).	option	-
proxy-auth-timeout	Authentication timeout in minutes for authenticated users (1 - 300 min, default = 10).	integer	Minimum value: 1 Maximum value: 300
proxy-re-authentication-mode	Control if users must re-authenticate after a session is closed, traffic has been idle, or from the point at which the user was first created. session: Proxy re-authentication timeout begins at the closure of the session. traffic: Proxy re-authentication timeout begins after traffic has not been received. absolute: Proxy re-authentication timeout begins when the user was first created.	option	-
proxy-auth-lifetime	Enable/disable authenticated users lifetime control. This is a cap on the total time a proxy user can be authenticated for after which re-authentication will take place. enable: Enable authenticated users lifetime control. disable: Disable authenticated users lifetime control.	option	-
proxy-auth-lifetime-timeout	Lifetime timeout in minutes for authenticated users (5 - 65535 min, default=480 (8 hours)).	integer	Minimum value: 5 Maximum value: 65535
sys-perf-log-interval	Time in minutes between updates of performance statistics logging. (1 - 15 min, default = 5, 0 = disabled).	integer	Minimum value: 0 Maximum value: 15
check-protocol-header	Level of checking performed on protocol headers. Strict checking is more thorough but may affect performance. Loose checking is ok in most cases. loose: Check protocol header loosely. strict: Check protocol header strictly.	option	-
vip-arp-range	Controls the number of ARPs that the FortiGate sends for a Virtual IP (VIP) address range. unlimited: Send ARPs for all addresses in VIP range. restricted: Send ARPs for the first 8192 addresses in VIP range.	option	-
reset-sessionless-tcp	Action to perform if the FortiGate receives a TCP packet but cannot find a corresponding session in its session table. NAT/Route mode only. enable: Enable reset session-less TCP. disable: Disable reset session-less TCP.	option	-
allow-traffic-redirect	Disable to allow traffic to be routed back on a different interface. enable: Enable allow traffic redirect. disable: Disable allow traffic redirect.	option	-
strict-dirty-session-check	Enable to check the session against the original policy when revalidating. This can prevent dropping of redirected sessions when web-filtering and authentication are enabled together. If this option is enabled, the FortiGate unit deletes a session if a routing or policy change causes the session to no longer match the policy that originally allowed the session. enable: Enable strict dirty-session check. disable: Disable strict dirty-session check.	option	-
tcp-halfclose-timer	Number of seconds the FortiGate unit should wait to close a session after one peer has sent a FIN packet but the other has not responded (1 - 86400 sec (1 day), default = 120).	integer	Minimum value: 1 Maximum value: 86400
tcp-halfopen-timer	Number of seconds the FortiGate unit should wait to close a session after one peer has sent an open session packet but the other has not responded (1 - 86400 sec (1 day), default = 10).	integer	Minimum value: 1 Maximum value: 86400
tcp-timewait-timer	Length of the TCP TIME-WAIT state in seconds.	integer	Minimum value: 0 Maximum value: 300
udp-idle-timer	UDP connection session timeout. This command can be useful in managing CPU and memory resources (1 - 86400 seconds (1 day), default = 60).	integer	Minimum value: 1 Maximum value: 86400
block-session-timer	Duration in seconds for blocked sessions (1 - 300 sec (5 minutes), default = 30).	integer	Minimum value: 1 Maximum value: 300
ip-src-port-range	IP source port range used for traffic originating from the FortiGate unit.	user	Not Specified
pre-login-banner	Enable/disable displaying the administrator access disclaimer message on the login page before an administrator logs in. enable: Enable pre-login banner. disable: Disable pre-login banner.	option	-
post-login-banner	Enable/disable displaying the administrator access disclaimer message after an administrator successfully logs in. disable: Disable post-login banner. enable: Enable post-login banner.	option	-
tftp	Enable/disable TFTP. enable: Enable TFTP. disable: Disable TFTP.	option	-
av-failopen	Set the action to take if the FortiGate is running low on memory or the proxy connection limit has been reached. pass: Bypass the antivirus system when memory is low. Antivirus scanning resumes when the low memory condition is resolved. off: Stop accepting new AV sessions when entering conserve mode, but continue to process current active sessions. one-shot: Bypass the antivirus system when memory is low.	option	-
av-failopen-session	When enabled and a proxy for a protocol runs out of room in its session table, that protocol goes into failopen mode and enacts the action specified by av-failopen. enable: Enable AV fail open session option. disable: Disable AV fail open session option.	option	-
memory-use-threshold-extreme	Threshold at which memory usage is considered extreme (new sessions are dropped) (% of total RAM, default = 95).	integer	Minimum value: 70 Maximum value: 97
memory-use-threshold-red	Threshold at which memory usage forces the FortiGate to enter conserve mode (% of total RAM, default = 88).	integer	Minimum value: 70 Maximum value: 97
memory-use-threshold-green	Threshold at which memory usage forces the FortiGate to exit conserve mode (% of total RAM, default = 82).	integer	Minimum value: 70 Maximum value: 97
cpu-use-threshold	Threshold at which CPU usage is reported. (% of total CPU, default = 90).	integer	Minimum value: 50 Maximum value: 99
check-reset-range	Configure ICMP error message verification. You can either apply strict RST range checking or disable it. strict: Check RST range strictly. disable: Disable RST range check.	option	-
vdom-mode	Enable/disable support for split/multiple virtual domains (VDOMs). no-vdom: Disable split/multiple VDOMs mode. split-vdom: Enable split VDOMs mode. multi-vdom: Enable multiple VDOMs mode.	option	-
long-vdom-name	Enable/disable long VDOM name support. enable: Enable long VDOM name support. disable: Disable long VDOM name support.	option	-
admin-port	Administrative access port for HTTP. (1 - 65535, default = 80).	integer	Minimum value: 1 Maximum value: 65535
admin-sport	Administrative access port for HTTPS. (1 - 65535, default = 443).	integer	Minimum value: 1 Maximum value: 65535
admin-https-redirect	Enable/disable redirection of HTTP administration access to HTTPS. enable: Enable redirecting HTTP administration access to HTTPS. disable: Disable redirecting HTTP administration access to HTTPS.	option	-
admin-hsts-max-age	HTTPS Strict-Transport-Security header max-age in seconds. A value of 0 will reset any HSTS records in the browser.When admin-https-redirect is disabled the header max-age will be 0.	integer	Minimum value: 0 Maximum value: 2147483647
admin-ssh-password	Enable/disable password authentication for SSH admin access. enable: Enable password authentication for SSH admin access. disable: Disable password authentication for SSH admin access.	option	-
admin-restrict-local	Enable/disable local admin authentication restriction when remote authenticator is up and running. (default = disable) enable: Enable local admin authentication restriction. disable: Disable local admin authentication restriction.	option	-
admin-ssh-port	Administrative access port for SSH. (1 - 65535, default = 22).	integer	Minimum value: 1 Maximum value: 65535
admin-ssh-grace-time	Maximum time in seconds permitted between making an SSH connection to the FortiGate unit and authenticating (10 - 3600 sec (1 hour), default 120).	integer	Minimum value: 10 Maximum value: 3600
admin-ssh-v1	Enable/disable SSH v1 compatibility. enable: Enable SSH v1 compatibility. disable: Disable SSH v1 compatibility.	option	-
admin-telnet	Enable/disable TELNET service. enable: Enable TELNET service. disable: Disable TELNET service.	option	-
admin-telnet-port	Administrative access port for TELNET. (1 - 65535, default = 23).	integer	Minimum value: 1 Maximum value: 65535
default-service-source-port	Default service source port range. (default=1-65535)	user	Not Specified
admin-maintainer	Enable/disable maintainer administrator login. When enabled, the maintainer account can be used to log in from the console after a hard reboot. The password is "bcpb" followed by the FortiGate unit serial number. You have limited time to complete this login. enable: Enable login for special user (maintainer). disable: Disable login for special user (maintainer).	option	-
admin-server-cert	Server certificate that the FortiGate uses for HTTPS administrative connections.	string	Maximum length: 35
user-server-cert	Certificate to use for https user authentication.	string	Maximum length: 35
admin-https-pki-required	Enable/disable admin login method. Enable to force administrators to provide a valid certificate to log in if PKI is enabled. Disable to allow administrators to log in with a certificate or password. enable: Admin users must provide a valid certificate when PKI is enabled for HTTPS admin access. disable: Admin users can login by providing a valid certificate or password.	option	-
wifi-certificate	Certificate to use for WiFi authentication.	string	Maximum length: 35
wifi-ca-certificate	CA certificate that verifies the WiFi certificate.	string	Maximum length: 79
auth-http-port	User authentication HTTP port. (1 - 65535, default = 80).	integer	Minimum value: 1 Maximum value: 65535
auth-https-port	User authentication HTTPS port. (1 - 65535, default = 443).	integer	Minimum value: 1 Maximum value: 65535
auth-keepalive	Enable to prevent user authentication sessions from timing out when idle. enable: Enable use of keep alive to extend authentication. disable: Disable use of keep alive to extend authentication.	option	-
policy-auth-concurrent	Number of concurrent firewall use logins from the same user (1 - 100, default = 0 means no limit).	integer	Minimum value: 0 Maximum value: 100
auth-session-limit	Action to take when the number of allowed user authenticated sessions is reached. block-new: Block new user authentication attempts. logout-inactive: Logout the most inactive user authenticated sessions.	option	-
auth-cert	Server certificate that the FortiGate uses for HTTPS firewall authentication connections.	string	Maximum length: 35
clt-cert-req	Enable/disable requiring administrators to have a client certificate to log into the GUI using HTTPS. enable: Enable require client certificate for GUI login. disable: Disable require client certificate for GUI login.	option	-
fortiservice-port	FortiService port (1 - 65535, default = 8013). Used by FortiClient endpoint compliance. Older versions of FortiClient used a different port.	integer	Minimum value: 1 Maximum value: 65535
cfg-save	Configuration file save mode for CLI changes. automatic: Automatically save config. manual: Manually save config. revert: Manually save config and revert the config when timeout.	option	-
cfg-revert-timeout	Time-out for reverting to the last saved configuration.	integer	Minimum value: 10 Maximum value: 4294967295
reboot-upon-config-restore	Enable/disable reboot of system upon restoring configuration. enable: Enable reboot of system upon restoring configuration. disable: Disable reboot of system upon restoring configuration.	option	-
admin-scp	Enable/disable using SCP to download the system configuration. You can use SCP as an alternative method for backing up the configuration. enable: Enable allow system configuration download by SCP. disable: Disable allow system configuration download by SCP.	option	-
security-rating-result-submission	Enable/disable the submission of Security Rating results to FortiGuard. enable: Enable submission of Security Rating results to FortiGuard. disable: Disable submission of Security Rating results to FortiGuard.	option	-
security-rating-run-on-schedule	Enable/disable scheduled runs of Security Rating. enable: Enable scheduled runs of Security Rating. disable: Disable scheduled runs of Security Rating.	option	-
wireless-controller	Enable/disable the wireless controller feature to use the FortiGate unit to manage FortiAPs. enable: Enable wireless controller. disable: Disable wireless controller.	option	-
wireless-controller-port	Port used for the control channel in wireless controller mode (wireless-mode is ac). The data channel port is the control channel port number plus one (1024 - 49150, default = 5246).	integer	Minimum value: 1024 Maximum value: 49150
fortiextender-data-port	FortiExtender data port (1024 - 49150, default = 25246).	integer	Minimum value: 1024 Maximum value: 49150
fortiextender	Enable/disable FortiExtender. disable: Disable FortiExtender controller. enable: Enable FortiExtender controller.	option	-
fortiextender-vlan-mode	Enable/disable FortiExtender VLAN mode. enable: Enable FortiExtender VLAN mode. disable: Disable FortiExtender VLAN mode.	option	-
switch-controller	Enable/disable switch controller feature. Switch controller allows you to manage FortiSwitch from the FortiGate itself. disable: Disable switch controller feature. enable: Enable switch controller feature.	option	-
switch-controller-reserved-network	Enable reserved network subnet for controlled switches. This is available when the switch controller is enabled.	ipv4-classnet	Not Specified
dnsproxy-worker-count	DNS proxy worker count.	integer	Minimum value: 1 Maximum value: 40
url-filter-count	URL filter daemon count.	integer	Minimum value: 1 Maximum value: 4
proxy-worker-count	Proxy worker count.	integer	Minimum value: 1 Maximum value: 40
scanunit-count	Number of scanunits. The range and the default depend on the number of CPUs. Only available on FortiGate units with multiple CPUs.	integer	Minimum value: 2 Maximum value: 40
proxy-kxp-hardware-acceleration	Enable/disable using the content processor to accelerate KXP traffic. disable: Disable using the content processor to accelerate KXP traffic. enable: Enable using the content processor to accelerate KXP traffic.	option	-
proxy-cipher-hardware-acceleration	Enable/disable using content processor (CP8 or CP9) hardware acceleration to encrypt and decrypt IPsec and SSL traffic. disable: Disable using content processor (CP8 or CP9) hardware acceleration to encrypt and decrypt IPsec and SSL traffic. enable: Enable using content processor (CP8 or CP9) hardware acceleration to encrypt and decrypt IPsec and SSL traffic.	option	-
fgd-alert-subscription	Type of alert to retrieve from FortiGuard. advisory: Retrieve FortiGuard advisories, report and news alerts. latest-threat: Retrieve latest FortiGuard threats alerts. latest-virus: Retrieve latest FortiGuard virus alerts. latest-attack: Retrieve latest FortiGuard attack alerts. new-antivirus-db: Retrieve FortiGuard AV database release alerts. new-attack-db: Retrieve FortiGuard IPS database release alerts.	option	-
ipsec-hmac-offload	Enable/disable offloading (hardware acceleration) of HMAC processing for IPsec VPN. enable: Enable offload IPsec HMAC processing to hardware if possible. disable: Disable offload IPsec HMAC processing to hardware.	option	-
ipv6-accept-dad	Enable/disable acceptance of IPv6 Duplicate Address Detection (DAD).	integer	Minimum value: 0 Maximum value: 2
ipv6-allow-anycast-probe	Enable/disable IPv6 address probe through Anycast. enable: Enable probing of IPv6 address space through Anycast disable: Disable probing of IPv6 address space through Anycast	option	-
csr-ca-attribute	Enable/disable the CA attribute in certificates. Some CA servers reject CSRs that have the CA attribute. enable: Enable CA attribute in CSR. disable: Disable CA attribute in CSR.	option	-
wimax-4g-usb	Enable/disable comparability with WiMAX 4G USB devices. enable: Enable WiMax 4G. disable: Disable WiMax 4G.	option	-
cert-chain-max	Maximum number of certificates that can be traversed in a certificate chain.	integer	Minimum value: 1 Maximum value: 2147483647
sslvpn-max-worker-count	Maximum number of SSL VPN processes. Upper limit for this value is the number of CPUs and depends on the model.	integer	Minimum value: 0 Maximum value: 40
sslvpn-kxp-hardware-acceleration	Enable/disable SSL VPN KXP hardware acceleration. enable: Enable KXP SSL-VPN hardware acceleration. disable: Disable KXP SSL-VPN hardware acceleration.	option	-
sslvpn-cipher-hardware-acceleration	Enable/disable SSL VPN hardware acceleration. enable: Enable SSL-VPN cipher hardware acceleration. disable: Disable SSL-VPN cipher hardware acceleration.	option	-
sslvpn-plugin-version-check	Enable/disable checking browser's plugin version by SSL VPN. enable: Enable SSL-VPN automatic checking of browser plug-in version. disable: Disable SSL-VPN automatic checking of browser plug-in version.	option	-
two-factor-ftk-expiry	FortiToken authentication session timeout (60 - 600 sec (10 minutes), default = 60).	integer	Minimum value: 60 Maximum value: 600
two-factor-email-expiry	Email-based two-factor authentication session timeout (30 - 300 seconds (5 minutes), default = 60).	integer	Minimum value: 30 Maximum value: 300
two-factor-sms-expiry	SMS-based two-factor authentication session timeout (30 - 300 sec, default = 60).	integer	Minimum value: 30 Maximum value: 300
two-factor-fac-expiry	FortiAuthenticator token authentication session timeout (10 - 3600 seconds (1 hour), default = 60).	integer	Minimum value: 10 Maximum value: 3600
two-factor-ftm-expiry	FortiToken Mobile session timeout (1 - 168 hours (7 days), default = 72).	integer	Minimum value: 1 Maximum value: 168
per-user-bwl	Enable/disable per-user black/white list filter. enable: Enable per-user black/white list filter. disable: Disable per-user black/white list filter.	option	-
wad-worker-count	Number of explicit proxy WAN optimization daemon (WAD) processes. By default WAN optimization, explicit proxy, and web caching is handled by all of the CPU cores in a FortiGate unit.	integer	Minimum value: 0 Maximum value: 40
wad-csvc-cs-count	Number of concurrent WAD-cache-service object-cache processes.	integer	Minimum value: 1 Maximum value: 1
wad-csvc-db-count	Number of concurrent WAD-cache-service byte-cache processes.	integer	Minimum value: 0 Maximum value: 40
wad-source-affinity	Enable/disable dispatching traffic to WAD workers based on source affinity. disable: Disable dispatching traffic to WAD workers based on source affinity. enable: Enable dispatching traffic to WAD workers based on source affinity.	option	-
wad-memory-change-granularity	Minimum percentage change in system memory usage detected by the wad daemon prior to adjusting TCP window size for any active connection.	integer	Minimum value: 5 Maximum value: 25
login-timestamp	Enable/disable login time recording. enable: Enable login time recording. disable: Disable login time recording.	option	-
miglogd-children	Number of logging (miglogd) processes to be allowed to run. Higher number can reduce performance; lower number can slow log processing time. No logs will be dropped or lost if the number is changed.	integer	Minimum value: 0 Maximum value: 15
special-file-23-support	Enable/disable IPS detection of HIBUN format files when using Data Leak Protection. disable: Disable using IPS detection of HIBUN format files when using Data Leak Protection. enable: Enable using IPS detection of HIBUN format files when using Data Leak Protection.	option	-
log-uuid-policy	Enable/disable insertion of policy UUIDs to traffic logs. enable: Enable insertion of policy UUID to traffic logs. disable: Disable insertion of policy UUID to traffic logs.	option	-
log-uuid-address	Enable/disable insertion of address UUIDs to traffic logs. enable: Enable insertion of address UUID to traffic logs. disable: Disable insertion of address UUID to traffic logs.	option	-
log-ssl-connection	Enable/disable logging of SSL connection events. enable: Enable logging of SSL connection events. disable: Disable logging of SSL connection events.	option	-
arp-max-entry	Maximum number of dynamically learned MAC addresses that can be added to the ARP table (131072 - 2147483647, default = 131072).	integer	Minimum value: 131072 Maximum value: 2147483647
av-affinity	Affinity setting for AV scanning (hexadecimal value up to 256 bits in the format of xxxxxxxxxxxxxxxx).	string	Maximum length: 79
wad-affinity	Affinity setting for wad (hexadecimal value up to 256 bits in the format of xxxxxxxxxxxxxxxx).	string	Maximum length: 79
ips-affinity	Affinity setting for IPS (hexadecimal value up to 256 bits in the format of xxxxxxxxxxxxxxxx; allowed CPUs must be less than total number of IPS engine daemons).	string	Maximum length: 79
miglog-affinity	Affinity setting for logging (64-bit hexadecimal value in the format of xxxxxxxxxxxxxxxx).	string	Maximum length: 19
url-filter-affinity	URL filter CPU affinity.	string	Maximum length: 79
ndp-max-entry	Maximum number of NDP table entries (set to 65,536 or higher; if set to 0, kernel holds 65,536 entries).	integer	Minimum value: 65536 Maximum value: 2147483647
br-fdb-max-entry	Maximum number of bridge forwarding database (FDB) entries.	integer	Minimum value: 8192 Maximum value: 2147483647
max-route-cache-size	Maximum number of IP route cache entries (0 - 2147483647).	integer	Minimum value: 0 Maximum value: 2147483647
ipsec-asic-offload	Enable/disable ASIC offloading (hardware acceleration) for IPsec VPN traffic. Hardware acceleration can offload IPsec VPN sessions and accelerate encryption and decryption. enable: Enable ASIC offload for IPsec VPN. disable: Disable ASIC offload for IPsec VPN.	option	-
ipsec-soft-dec-async	Enable/disable software decryption asynchronization (using multiple CPUs to do decryption) for IPsec VPN traffic. enable: Enable software decryption asynchronization for IPsec VPN. disable: Disable software decryption asynchronization for IPsec VPN.	option	-
device-idle-timeout	Time in seconds that a device must be idle to automatically log the device user out. (30 - 31536000 sec (30 sec to 1 year), default = 300).	integer	Minimum value: 30 Maximum value: 31536000
device-identification-active-scan-delay	Number of seconds to passively scan a device before performing an active scan. (20 - 3600 sec, (20 sec to 1 hour), default = 90).	integer	Minimum value: 20 Maximum value: 3600
gui-device-latitude	Add the latitude of the location of this FortiGate to position it on the Threat Map.	string	Maximum length: 19
gui-device-longitude	Add the longitude of the location of this FortiGate to position it on the Threat Map.	string	Maximum length: 19
private-data-encryption	Enable/disable private data encryption using an AES 128-bit key. disable: Disable private data encryption using an AES 128-bit key. enable: Enable private data encryption using an AES 128-bit key.	option	-
auto-auth-extension-device	Enable/disable automatic authorization of dedicated Fortinet extension devices. enable: Enable automatic authorization of dedicated Fortinet extension device globally. disable: Disable automatic authorization of dedicated Fortinet extension device globally.	option	-
gui-theme	Color scheme for the administration GUI. green: Green theme. neutrino: Neutrino theme. blue: Light blue theme. melongene: Melongene theme (eggplant color). mariner: Mariner theme (dark blue color).	option	-
gui-date-format	Default date format used throughout GUI. yyyy/MM/dd: Year/Month/Day. dd/MM/yyyy: Day/Month/Year. MM/dd/yyyy: Month/Day/Year. yyyy-MM-dd: Year-Month-Day. dd-MM-yyyy: Day-Month-Year. MM-dd-yyyy: Month-Day-Year.	option	-
gui-date-time-source	Source from which the FortiGate GUI uses to display date and time entries. system: Use this FortiGate unit's configured timezone. browser: Use the web browser's timezone.	option	-
igmp-state-limit	Maximum number of IGMP memberships (96 - 64000, default = 3200).	integer	Minimum value: 96 Maximum value: 128000
cloud-communication	Enable/disable all cloud communication. enable: Allow cloud communication. disable: Disable all cloud communication.	option	-
fec-port	Local UDP port for Forward Error Correction (49152 - 65535).	integer	Minimum value: 49152 Maximum value: 65535
fortitoken-cloud	Enable/disable FortiToken Cloud service. enable: Enable FortiToken Cloud service. disable: Disable FortiToken Cloud service.	option	-

Configure global attributes.

config system global Description: Configure global attributes. set language [english|french|...] set gui-ipv6 [enable|disable] set gui-certificates [enable|disable] set gui-custom-language [enable|disable] set gui-wireless-opensecurity [enable|disable] set gui-display-hostname [enable|disable] set gui-fortisandbox-cloud [enable|disable] set gui-lines-per-page {integer} set admin-https-ssl-versions {option1}, {option2}, ... set admintimeout {integer} set admin-console-timeout {integer} set ssd-trim-freq [never|hourly|...] set ssd-trim-hour {integer} set ssd-trim-min {integer} set ssd-trim-weekday [sunday|monday|...] set ssd-trim-date {integer} set admin-concurrent [enable|disable] set admin-lockout-threshold {integer} set admin-lockout-duration {integer} set refresh {integer} set interval {integer} set failtime {integer} set daily-restart [enable|disable] set restart-time {user} set radius-port {integer} set admin-login-max {integer} set remoteauthtimeout {integer} set ldapconntimeout {integer} set batch-cmdb [enable|disable] set max-dlpstat-memory {integer} set multi-factor-authentication [optional|mandatory] set ssl-min-proto-version [SSLv3|TLSv1|...] set autorun-log-fsck [enable|disable] set dst [enable|disable] set timezone [01|02|...] set traffic-priority [tos|dscp] set traffic-priority-level [low|medium|...] set anti-replay [disable|loose|...] set send-pmtu-icmp [enable|disable] set honor-df [enable|disable] set revision-image-auto-backup [enable|disable] set revision-backup-on-logout [enable|disable] set management-vdom {string} set hostname {string} set gui-allow-default-hostname [enable|disable] set alias {string} set strong-crypto [enable|disable] set ssh-cbc-cipher [enable|disable] set ssh-hmac-md5 [enable|disable] set ssh-kex-sha1 [enable|disable] set ssh-mac-weak [enable|disable] set ssl-static-key-ciphers [enable|disable] set snat-route-change [enable|disable] set cli-audit-log [enable|disable] set dh-params [1024|1536|...] set fds-statistics [enable|disable] set fds-statistics-period {integer} set tcp-option [enable|disable] set lldp-transmission [enable|disable] set lldp-reception [enable|disable] set proxy-auth-timeout {integer} set proxy-re-authentication-mode [session|traffic|...] set proxy-auth-lifetime [enable|disable] set proxy-auth-lifetime-timeout {integer} set sys-perf-log-interval {integer} set check-protocol-header [loose|strict] set vip-arp-range [unlimited|restricted] set reset-sessionless-tcp [enable|disable] set allow-traffic-redirect [enable|disable] set strict-dirty-session-check [enable|disable] set tcp-halfclose-timer {integer} set tcp-halfopen-timer {integer} set tcp-timewait-timer {integer} set udp-idle-timer {integer} set block-session-timer {integer} set ip-src-port-range {user} set pre-login-banner [enable|disable] set post-login-banner [disable|enable] set tftp [enable|disable] set av-failopen [pass|off|...] set av-failopen-session [enable|disable] set memory-use-threshold-extreme {integer} set memory-use-threshold-red {integer} set memory-use-threshold-green {integer} set cpu-use-threshold {integer} set check-reset-range [strict|disable] set vdom-mode [no-vdom|split-vdom|...] set long-vdom-name [enable|disable] set admin-port {integer} set admin-sport {integer} set admin-https-redirect [enable|disable] set admin-hsts-max-age {integer} set admin-ssh-password [enable|disable] set admin-restrict-local [enable|disable] set admin-ssh-port {integer} set admin-ssh-grace-time {integer} set admin-ssh-v1 [enable|disable] set admin-telnet [enable|disable] set admin-telnet-port {integer} set default-service-source-port {user} set admin-maintainer [enable|disable] set admin-server-cert {string} set user-server-cert {string} set admin-https-pki-required [enable|disable] set wifi-certificate {string} set wifi-ca-certificate {string} set auth-http-port {integer} set auth-https-port {integer} set auth-keepalive [enable|disable] set policy-auth-concurrent {integer} set auth-session-limit [block-new|logout-inactive] set auth-cert {string} set clt-cert-req [enable|disable] set fortiservice-port {integer} set cfg-save [automatic|manual|...] set cfg-revert-timeout {integer} set reboot-upon-config-restore [enable|disable] set admin-scp [enable|disable] set security-rating-result-submission [enable|disable] set security-rating-run-on-schedule [enable|disable] set wireless-controller [enable|disable] set wireless-controller-port {integer} set fortiextender-data-port {integer} set fortiextender [disable|enable] set fortiextender-vlan-mode [enable|disable] set switch-controller [disable|enable] set switch-controller-reserved-network {ipv4-classnet} set dnsproxy-worker-count {integer} set url-filter-count {integer} set proxy-worker-count {integer} set scanunit-count {integer} set proxy-kxp-hardware-acceleration [disable|enable] set proxy-cipher-hardware-acceleration [disable|enable] set fgd-alert-subscription {option1}, {option2}, ... set ipsec-hmac-offload [enable|disable] set ipv6-accept-dad {integer} set ipv6-allow-anycast-probe [enable|disable] set csr-ca-attribute [enable|disable] set wimax-4g-usb [enable|disable] set cert-chain-max {integer} set sslvpn-max-worker-count {integer} set sslvpn-kxp-hardware-acceleration [enable|disable] set sslvpn-cipher-hardware-acceleration [enable|disable] set sslvpn-plugin-version-check [enable|disable] set two-factor-ftk-expiry {integer} set two-factor-email-expiry {integer} set two-factor-sms-expiry {integer} set two-factor-fac-expiry {integer} set two-factor-ftm-expiry {integer} set per-user-bwl [enable|disable] set wad-worker-count {integer} set wad-csvc-cs-count {integer} set wad-csvc-db-count {integer} set wad-source-affinity [disable|enable] set wad-memory-change-granularity {integer} set login-timestamp [enable|disable] set miglogd-children {integer} set special-file-23-support [disable|enable] set log-uuid-policy [enable|disable] set log-uuid-address [enable|disable] set log-ssl-connection [enable|disable] set arp-max-entry {integer} set av-affinity {string} set wad-affinity {string} set ips-affinity {string} set miglog-affinity {string} set url-filter-affinity {string} set ndp-max-entry {integer} set br-fdb-max-entry {integer} set max-route-cache-size {integer} set ipsec-asic-offload [enable|disable] set ipsec-soft-dec-async [enable|disable] set device-idle-timeout {integer} set device-identification-active-scan-delay {integer} set gui-device-latitude {string} set gui-device-longitude {string} set private-data-encryption [disable|enable] set auto-auth-extension-device [enable|disable] set gui-theme [green|neutrino|...] set gui-date-format [yyyy/MM/dd|dd/MM/yyyy|...] set gui-date-time-source [system|browser] set igmp-state-limit {integer} set cloud-communication [enable|disable] set fec-port {integer} set fortitoken-cloud [enable|disable] end

config system global

Parameter Name

Description

Type

Size

language

GUI display language.
english: English.
french: French.
spanish: Spanish.
portuguese: Portuguese.
japanese: Japanese.
trach: Traditional Chinese.
simch: Simplified Chinese.
korean: Korean.

option

gui-ipv6

Enable/disable IPv6 settings on the GUI.
enable: Display the feature in GUI.
disable: Do not display the feature in GUI.

option

gui-certificates

Enable/disable the System > Certificate GUI page, allowing you to add and configure certificates from the GUI.
enable: Display the feature in GUI.
disable: Do not display the feature in GUI.

option

gui-custom-language

Enable/disable custom languages in GUI.
enable: Display the feature in GUI.
disable: Do not display the feature in GUI.

option

gui-wireless-opensecurity

Enable/disable wireless open security option on the GUI.
enable: Display the feature in GUI.
disable: Do not display the feature in GUI.

option

gui-display-hostname

Enable/disable displaying the FortiGate's hostname on the GUI login page.
enable: Display the feature in GUI.
disable: Do not display the feature in GUI.

option

gui-fortisandbox-cloud

Enable/disable displaying FortiSandbox Cloud on the GUI.
enable: Display the feature in GUI.
disable: Do not display the feature in GUI.

option

gui-lines-per-page

Number of lines to display per page for web administration.

integer

Minimum value: 20 Maximum value: 1000

admin-https-ssl-versions

Allowed TLS versions for web administration.
tlsv1-1: TLS 1.1.
tlsv1-2: TLS 1.2.
tlsv1-3: TLS 1.3.

option

admintimeout

Number of minutes before an idle administrator session times out (5 - 480 minutes (8 hours), default = 5). A shorter idle timeout is more secure.

integer

Minimum value: 1 Maximum value: 480

admin-console-timeout

Console login timeout that overrides the admintimeout value. (15 - 300 seconds) (15 seconds to 5 minutes). 0 the default, disables this timeout.

integer

Minimum value: 15 Maximum value: 300

ssd-trim-freq

How often to run SSD Trim (default = weekly). SSD Trim prevents SSD drive data loss by finding and isolating errors.
never: Never Run SSD Trim.
hourly: Run SSD Trim Hourly.
daily: Run SSD Trim Daily.
weekly: Run SSD Trim Weekly.
monthly: Run SSD Trim Monthly.

option

ssd-trim-hour

Hour of the day on which to run SSD Trim (0 - 23, default = 1).

integer

Minimum value: 0 Maximum value: 23

ssd-trim-min

Minute of the hour on which to run SSD Trim (0 - 59, 60 for random).

integer

Minimum value: 0 Maximum value: 60

ssd-trim-weekday

Day of week to run SSD Trim.
sunday: Sunday
monday: Monday
tuesday: Tuesday
wednesday: Wednesday
thursday: Thursday
friday: Friday
saturday: Saturday

option

ssd-trim-date

Date within a month to run ssd trim.

integer

Minimum value: 1 Maximum value: 31

admin-concurrent

Enable/disable concurrent administrator logins. (Use policy-auth-concurrent for firewall authenticated users.)
enable: Enable admin concurrent login.
disable: Disable admin concurrent login.

option

admin-lockout-threshold

Number of failed login attempts before an administrator account is locked out for the admin-lockout-duration.

integer

Minimum value: 1 Maximum value: 10

admin-lockout-duration

Amount of time in seconds that an administrator account is locked out after reaching the admin-lockout-threshold for repeated failed login attempts.

integer

Minimum value: 1 Maximum value: 2147483647

refresh

Statistics refresh interval in GUI.

integer

Minimum value: 0 Maximum value: 4294967295

interval

Dead gateway detection interval.

integer

Minimum value: 0 Maximum value: 4294967295

failtime

Fail-time for server lost.

integer

Minimum value: 0 Maximum value: 4294967295

daily-restart

Enable/disable daily restart of FortiGate unit. Use the restart-time option to set the time of day for the restart.
enable: Enable daily reboot of the FortiGate.
disable: Disable daily reboot of the FortiGate.

option

restart-time

Daily restart time (hh:mm).

user

Not Specified

radius-port

RADIUS service port number.

integer

Minimum value: 1 Maximum value: 65535

admin-login-max

Maximum number of administrators who can be logged in at the same time (1 - 100, default = 100)

integer

Minimum value: 1 Maximum value: 100

remoteauthtimeout

Number of seconds that the FortiGate waits for responses from remote RADIUS, LDAP, or TACACS+ authentication servers. (0-300 sec, default = 5, 0 means no timeout).

integer

Minimum value: 1 Maximum value: 300

ldapconntimeout

Global timeout for connections with remote LDAP servers in milliseconds (1 - 300000, default 500).

integer

Minimum value: 1 Maximum value: 300000

batch-cmdb

Enable/disable batch mode, allowing you to enter a series of CLI commands that will execute as a group once they are loaded.
enable: Enable batch mode to execute in CMDB server.
disable: Disable batch mode to execute in CMDB server.

option

max-dlpstat-memory

Maximum DLP stat memory (0 - 4294967295).

integer

Not Specified

multi-factor-authentication

Enforce all login methods to require an additional authentication factor (default = optional).
optional: Do not enforce all login methods to require an additional authentication factor (controlled by user settings).
mandatory: Enforce all login methods to require an additional authentication factor.

option

ssl-min-proto-version

Minimum supported protocol version for SSL/TLS connections (default = TLSv1.2).
SSLv3: SSLv3.
TLSv1: TLSv1.
TLSv1-1: TLSv1.1.
TLSv1-2: TLSv1.2.
TLSv1-3: TLSv1.3.

option

autorun-log-fsck

Enable/disable automatic log partition check after ungraceful shutdown.
enable: Enable automatic log partition check after ungraceful shutdown.
disable: Disable automatic log partition check after ungraceful shutdown.

option

dst

Enable/disable daylight saving time.
enable: Enable daylight saving time.
disable: Disable daylight saving time.

option

timezone

traffic-priority

Choose Type of Service (ToS) or Differentiated Services Code Point (DSCP) for traffic prioritization in traffic shaping.
tos: IP TOS.
dscp: DSCP (DiffServ) DS.

option

traffic-priority-level

Default system-wide level of priority for traffic prioritization.
low: Low priority.
medium: Medium priority.
high: High priority.

option

anti-replay

Level of checking for packet replay and TCP sequence checking.
disable: Disable anti-replay check.
loose: Loose anti-replay check.
strict: Strict anti-replay check.

option

send-pmtu-icmp

Enable/disable sending of path maximum transmission unit (PMTU) - ICMP destination unreachable packet and to support PMTUD protocol on your network to reduce fragmentation of packets.
enable: Enable sending of PMTU ICMP destination unreachable packet.
disable: Disable sending of PMTU ICMP destination unreachable packet.

option

honor-df

Enable/disable honoring of Don't-Fragment (DF) flag.
enable: Enable honoring of Don't-Fragment flag.
disable: Disable honoring of Don't-Fragment flag.

option

revision-image-auto-backup

Enable/disable back-up of the latest configuration revision after the firmware is upgraded.
enable: Enable revision image backup automatically when upgrading image.
disable: Disable revision image backup automatically when upgrading image.

option

revision-backup-on-logout

Enable/disable back-up of the latest configuration revision when an administrator logs out of the CLI or GUI.
enable: Enable revision config backup automatically when logout.
disable: Disable revision config backup automatically when logout.

option

management-vdom

Management virtual domain name.

string

Maximum length: 31

hostname

FortiGate unit's hostname. Most models will truncate names longer than 24 characters. Some models support hostnames up to 35 characters.

string

Maximum length: 35

gui-allow-default-hostname

Enable/disable the GUI warning about using a default hostname
enable: Stop the warning in the GUI.
disable: Show the warning in the GUI.

option

alias

Alias for your FortiGate unit.

string

Maximum length: 35

strong-crypto

Enable to use strong encryption and only allow strong ciphers (AES, 3DES) and digest (SHA1) for HTTPS/SSH/TLS/SSL functions.
enable: Enable strong crypto for HTTPS/SSH/TLS/SSL.
disable: Disable strong crypto for HTTPS/SSH/TLS/SSL.

option

ssh-cbc-cipher

Enable/disable CBC cipher for SSH access.
enable: Enable CBC cipher for SSH access.
disable: Disable CBC cipher for SSH access.

option

ssh-hmac-md5

Enable/disable HMAC-MD5 for SSH access.
enable: Enable HMAC-MD5 for SSH access.
disable: Disable HMAC-MD5 for SSH access.

option

ssh-kex-sha1

Enable/disable SHA1 key exchange for SSH access.
enable: Enable SHA1 for SSH key exchanges.
disable: Disable SHA1 for SSH key exchanges.

option

ssh-mac-weak

Enable/disable HMAC-SHA1 and UMAC-64-ETM for SSH access.
enable: Enable HMAC-SHA1 and UMAC-64-ETM for SSH access.
disable: Disable HMAC-SHA1 and UMAC-64-ETM for SSH access.

option

ssl-static-key-ciphers

Enable/disable static key ciphers in SSL/TLS connections (e.g. AES128-SHA, AES256-SHA, AES128-SHA256, AES256-SHA256).
enable: Enable static key ciphers in SSL/TLS connections.
disable: Disable static key ciphers in SSL/TLS connections.

option

snat-route-change

Enable/disable the ability to change the static NAT route.
enable: Enable SNAT route change.
disable: Disable SNAT route change.

option

cli-audit-log

Enable/disable CLI audit log.
enable: Enable CLI audit log.
disable: Disable CLI audit log.

option

dh-params

Number of bits to use in the Diffie-Hellman exchange for HTTPS/SSH protocols.
1024: 1024 bits.
1536: 1536 bits.
2048: 2048 bits.
3072: 3072 bits.
4096: 4096 bits.
6144: 6144 bits.
8192: 8192 bits.

option

fds-statistics

Enable/disable sending IPS, Application Control, and AntiVirus data to FortiGuard. This data is used to improve FortiGuard services and is not shared with external parties and is protected by Fortinet's privacy policy.
enable: Enable FortiGuard statistics.
disable: Disable FortiGuard statistics.

option

fds-statistics-period

FortiGuard statistics collection period in minutes. (1 - 1440 min (1 min to 24 hours), default = 60).

integer

Minimum value: 1 Maximum value: 1440

tcp-option

Enable SACK, timestamp and MSS TCP options.
enable: Enable TCP option.
disable: Disable TCP option.

option

lldp-transmission

Enable/disable Link Layer Discovery Protocol (LLDP) transmission.
enable: Enable transmission of Link Layer Discovery Protocol (LLDP).
disable: Disable transmission of Link Layer Discovery Protocol (LLDP).

option

lldp-reception

Enable/disable Link Layer Discovery Protocol (LLDP) reception.
enable: Enable reception of Link Layer Discovery Protocol (LLDP).
disable: Disable reception of Link Layer Discovery Protocol (LLDP).

option

proxy-auth-timeout

Authentication timeout in minutes for authenticated users (1 - 300 min, default = 10).

integer

Minimum value: 1 Maximum value: 300

proxy-re-authentication-mode

Control if users must re-authenticate after a session is closed, traffic has been idle, or from the point at which the user was first created.
session: Proxy re-authentication timeout begins at the closure of the session.
traffic: Proxy re-authentication timeout begins after traffic has not been received.
absolute: Proxy re-authentication timeout begins when the user was first created.

option

proxy-auth-lifetime

Enable/disable authenticated users lifetime control. This is a cap on the total time a proxy user can be authenticated for after which re-authentication will take place.
enable: Enable authenticated users lifetime control.
disable: Disable authenticated users lifetime control.

option

proxy-auth-lifetime-timeout

Lifetime timeout in minutes for authenticated users (5 - 65535 min, default=480 (8 hours)).

integer

Minimum value: 5 Maximum value: 65535

sys-perf-log-interval

Time in minutes between updates of performance statistics logging. (1 - 15 min, default = 5, 0 = disabled).

integer

Minimum value: 0 Maximum value: 15

check-protocol-header

Level of checking performed on protocol headers. Strict checking is more thorough but may affect performance. Loose checking is ok in most cases.
loose: Check protocol header loosely.
strict: Check protocol header strictly.

option

vip-arp-range

Controls the number of ARPs that the FortiGate sends for a Virtual IP (VIP) address range.
unlimited: Send ARPs for all addresses in VIP range.
restricted: Send ARPs for the first 8192 addresses in VIP range.

option

reset-sessionless-tcp

Action to perform if the FortiGate receives a TCP packet but cannot find a corresponding session in its session table. NAT/Route mode only.
enable: Enable reset session-less TCP.
disable: Disable reset session-less TCP.

option

allow-traffic-redirect

Disable to allow traffic to be routed back on a different interface.
enable: Enable allow traffic redirect.
disable: Disable allow traffic redirect.

option

strict-dirty-session-check

Enable to check the session against the original policy when revalidating. This can prevent dropping of redirected sessions when web-filtering and authentication are enabled together. If this option is enabled, the FortiGate unit deletes a session if a routing or policy change causes the session to no longer match the policy that originally allowed the session.
enable: Enable strict dirty-session check.
disable: Disable strict dirty-session check.

option

tcp-halfclose-timer

Number of seconds the FortiGate unit should wait to close a session after one peer has sent a FIN packet but the other has not responded (1 - 86400 sec (1 day), default = 120).

integer

Minimum value: 1 Maximum value: 86400

tcp-halfopen-timer

Number of seconds the FortiGate unit should wait to close a session after one peer has sent an open session packet but the other has not responded (1 - 86400 sec (1 day), default = 10).

integer

Minimum value: 1 Maximum value: 86400

tcp-timewait-timer

Length of the TCP TIME-WAIT state in seconds.

integer

Minimum value: 0 Maximum value: 300

udp-idle-timer

UDP connection session timeout. This command can be useful in managing CPU and memory resources (1 - 86400 seconds (1 day), default = 60).

integer

Minimum value: 1 Maximum value: 86400

block-session-timer

Duration in seconds for blocked sessions (1 - 300 sec (5 minutes), default = 30).

integer

Minimum value: 1 Maximum value: 300

ip-src-port-range

IP source port range used for traffic originating from the FortiGate unit.

user

Not Specified

pre-login-banner

Enable/disable displaying the administrator access disclaimer message on the login page before an administrator logs in.
enable: Enable pre-login banner.
disable: Disable pre-login banner.

option

post-login-banner

Enable/disable displaying the administrator access disclaimer message after an administrator successfully logs in.
disable: Disable post-login banner.
enable: Enable post-login banner.

option

tftp

Enable/disable TFTP.
enable: Enable TFTP.
disable: Disable TFTP.

option

av-failopen

Set the action to take if the FortiGate is running low on memory or the proxy connection limit has been reached.
pass: Bypass the antivirus system when memory is low. Antivirus scanning resumes when the low memory condition is resolved.
off: Stop accepting new AV sessions when entering conserve mode, but continue to process current active sessions.
one-shot: Bypass the antivirus system when memory is low.

option

av-failopen-session

When enabled and a proxy for a protocol runs out of room in its session table, that protocol goes into failopen mode and enacts the action specified by av-failopen.
enable: Enable AV fail open session option.
disable: Disable AV fail open session option.

option

memory-use-threshold-extreme

Threshold at which memory usage is considered extreme (new sessions are dropped) (% of total RAM, default = 95).

integer

Minimum value: 70 Maximum value: 97

memory-use-threshold-red

Threshold at which memory usage forces the FortiGate to enter conserve mode (% of total RAM, default = 88).

integer

Minimum value: 70 Maximum value: 97

memory-use-threshold-green

Threshold at which memory usage forces the FortiGate to exit conserve mode (% of total RAM, default = 82).

integer

Minimum value: 70 Maximum value: 97

cpu-use-threshold

Threshold at which CPU usage is reported. (% of total CPU, default = 90).

integer

Minimum value: 50 Maximum value: 99

check-reset-range

Configure ICMP error message verification. You can either apply strict RST range checking or disable it.
strict: Check RST range strictly.
disable: Disable RST range check.

option

vdom-mode

Enable/disable support for split/multiple virtual domains (VDOMs).
no-vdom: Disable split/multiple VDOMs mode.
split-vdom: Enable split VDOMs mode.
multi-vdom: Enable multiple VDOMs mode.

option

long-vdom-name

Enable/disable long VDOM name support.
enable: Enable long VDOM name support.
disable: Disable long VDOM name support.

option

admin-port

Administrative access port for HTTP. (1 - 65535, default = 80).

integer

Minimum value: 1 Maximum value: 65535

admin-sport

Administrative access port for HTTPS. (1 - 65535, default = 443).

integer

Minimum value: 1 Maximum value: 65535

admin-https-redirect

Enable/disable redirection of HTTP administration access to HTTPS.
enable: Enable redirecting HTTP administration access to HTTPS.
disable: Disable redirecting HTTP administration access to HTTPS.

option

admin-hsts-max-age

HTTPS Strict-Transport-Security header max-age in seconds. A value of 0 will reset any HSTS records in the browser.When admin-https-redirect is disabled the header max-age will be 0.

integer

Minimum value: 0 Maximum value: 2147483647

admin-ssh-password

Enable/disable password authentication for SSH admin access.
enable: Enable password authentication for SSH admin access.
disable: Disable password authentication for SSH admin access.

option

admin-restrict-local

Enable/disable local admin authentication restriction when remote authenticator is up and running. (default = disable)
enable: Enable local admin authentication restriction.
disable: Disable local admin authentication restriction.

option

admin-ssh-port

Administrative access port for SSH. (1 - 65535, default = 22).

integer

Minimum value: 1 Maximum value: 65535

admin-ssh-grace-time

Maximum time in seconds permitted between making an SSH connection to the FortiGate unit and authenticating (10 - 3600 sec (1 hour), default 120).

integer

Minimum value: 10 Maximum value: 3600

admin-ssh-v1

Enable/disable SSH v1 compatibility.
enable: Enable SSH v1 compatibility.
disable: Disable SSH v1 compatibility.

option

admin-telnet

Enable/disable TELNET service.
enable: Enable TELNET service.
disable: Disable TELNET service.

option

admin-telnet-port

Administrative access port for TELNET. (1 - 65535, default = 23).

integer

Minimum value: 1 Maximum value: 65535

default-service-source-port

Default service source port range. (default=1-65535)

user

Not Specified

admin-maintainer

Enable/disable maintainer administrator login. When enabled, the maintainer account can be used to log in from the console after a hard reboot. The password is "bcpb" followed by the FortiGate unit serial number. You have limited time to complete this login.
enable: Enable login for special user (maintainer).
disable: Disable login for special user (maintainer).

option

admin-server-cert

Server certificate that the FortiGate uses for HTTPS administrative connections.

string

Maximum length: 35

user-server-cert

Certificate to use for https user authentication.

string

Maximum length: 35

admin-https-pki-required

Enable/disable admin login method. Enable to force administrators to provide a valid certificate to log in if PKI is enabled. Disable to allow administrators to log in with a certificate or password.
enable: Admin users must provide a valid certificate when PKI is enabled for HTTPS admin access.
disable: Admin users can login by providing a valid certificate or password.

option

wifi-certificate

Certificate to use for WiFi authentication.

string

Maximum length: 35

wifi-ca-certificate

CA certificate that verifies the WiFi certificate.

string

Maximum length: 79

auth-http-port

User authentication HTTP port. (1 - 65535, default = 80).

integer

Minimum value: 1 Maximum value: 65535

auth-https-port

User authentication HTTPS port. (1 - 65535, default = 443).

integer

Minimum value: 1 Maximum value: 65535

auth-keepalive

Enable to prevent user authentication sessions from timing out when idle.
enable: Enable use of keep alive to extend authentication.
disable: Disable use of keep alive to extend authentication.

option

policy-auth-concurrent

Number of concurrent firewall use logins from the same user (1 - 100, default = 0 means no limit).

integer

Minimum value: 0 Maximum value: 100

auth-session-limit

Action to take when the number of allowed user authenticated sessions is reached.
block-new: Block new user authentication attempts.
logout-inactive: Logout the most inactive user authenticated sessions.

option

auth-cert

Server certificate that the FortiGate uses for HTTPS firewall authentication connections.

string

Maximum length: 35

clt-cert-req

Enable/disable requiring administrators to have a client certificate to log into the GUI using HTTPS.
enable: Enable require client certificate for GUI login.
disable: Disable require client certificate for GUI login.

option

fortiservice-port

FortiService port (1 - 65535, default = 8013). Used by FortiClient endpoint compliance. Older versions of FortiClient used a different port.

integer

Minimum value: 1 Maximum value: 65535

cfg-save

Configuration file save mode for CLI changes.
automatic: Automatically save config.
manual: Manually save config.
revert: Manually save config and revert the config when timeout.

option

cfg-revert-timeout

Time-out for reverting to the last saved configuration.

integer

Minimum value: 10 Maximum value: 4294967295

reboot-upon-config-restore

Enable/disable reboot of system upon restoring configuration.
enable: Enable reboot of system upon restoring configuration.
disable: Disable reboot of system upon restoring configuration.

option

admin-scp

Enable/disable using SCP to download the system configuration. You can use SCP as an alternative method for backing up the configuration.
enable: Enable allow system configuration download by SCP.
disable: Disable allow system configuration download by SCP.

option

security-rating-result-submission

Enable/disable the submission of Security Rating results to FortiGuard.
enable: Enable submission of Security Rating results to FortiGuard.
disable: Disable submission of Security Rating results to FortiGuard.

option

security-rating-run-on-schedule

Enable/disable scheduled runs of Security Rating.
enable: Enable scheduled runs of Security Rating.
disable: Disable scheduled runs of Security Rating.

option

wireless-controller

Enable/disable the wireless controller feature to use the FortiGate unit to manage FortiAPs.
enable: Enable wireless controller.
disable: Disable wireless controller.

option

wireless-controller-port

Port used for the control channel in wireless controller mode (wireless-mode is ac). The data channel port is the control channel port number plus one (1024 - 49150, default = 5246).

integer

Minimum value: 1024 Maximum value: 49150

fortiextender-data-port

FortiExtender data port (1024 - 49150, default = 25246).

integer

Minimum value: 1024 Maximum value: 49150

fortiextender

Enable/disable FortiExtender.
disable: Disable FortiExtender controller.
enable: Enable FortiExtender controller.

option

fortiextender-vlan-mode

Enable/disable FortiExtender VLAN mode.
enable: Enable FortiExtender VLAN mode.
disable: Disable FortiExtender VLAN mode.

option

switch-controller

Enable/disable switch controller feature. Switch controller allows you to manage FortiSwitch from the FortiGate itself.
disable: Disable switch controller feature.
enable: Enable switch controller feature.

option

switch-controller-reserved-network

Enable reserved network subnet for controlled switches. This is available when the switch controller is enabled.

ipv4-classnet

Not Specified

dnsproxy-worker-count

DNS proxy worker count.

integer

Minimum value: 1 Maximum value: 40

url-filter-count

URL filter daemon count.

integer

Minimum value: 1 Maximum value: 4

proxy-worker-count

Proxy worker count.

integer

Minimum value: 1 Maximum value: 40

scanunit-count

Number of scanunits. The range and the default depend on the number of CPUs. Only available on FortiGate units with multiple CPUs.

integer

Minimum value: 2 Maximum value: 40

proxy-kxp-hardware-acceleration

Enable/disable using the content processor to accelerate KXP traffic.
disable: Disable using the content processor to accelerate KXP traffic.
enable: Enable using the content processor to accelerate KXP traffic.

option

proxy-cipher-hardware-acceleration

Enable/disable using content processor (CP8 or CP9) hardware acceleration to encrypt and decrypt IPsec and SSL traffic.
disable: Disable using content processor (CP8 or CP9) hardware acceleration to encrypt and decrypt IPsec and SSL traffic.
enable: Enable using content processor (CP8 or CP9) hardware acceleration to encrypt and decrypt IPsec and SSL traffic.

option

fgd-alert-subscription

Type of alert to retrieve from FortiGuard.
advisory: Retrieve FortiGuard advisories, report and news alerts.
latest-threat: Retrieve latest FortiGuard threats alerts.
latest-virus: Retrieve latest FortiGuard virus alerts.
latest-attack: Retrieve latest FortiGuard attack alerts.
new-antivirus-db: Retrieve FortiGuard AV database release alerts.
new-attack-db: Retrieve FortiGuard IPS database release alerts.

option

ipsec-hmac-offload

Enable/disable offloading (hardware acceleration) of HMAC processing for IPsec VPN.
enable: Enable offload IPsec HMAC processing to hardware if possible.
disable: Disable offload IPsec HMAC processing to hardware.

option

ipv6-accept-dad

Enable/disable acceptance of IPv6 Duplicate Address Detection (DAD).

integer

Minimum value: 0 Maximum value: 2

ipv6-allow-anycast-probe

Enable/disable IPv6 address probe through Anycast.
enable: Enable probing of IPv6 address space through Anycast
disable: Disable probing of IPv6 address space through Anycast

option

csr-ca-attribute

Enable/disable the CA attribute in certificates. Some CA servers reject CSRs that have the CA attribute.
enable: Enable CA attribute in CSR.
disable: Disable CA attribute in CSR.

option

wimax-4g-usb

Enable/disable comparability with WiMAX 4G USB devices.
enable: Enable WiMax 4G.
disable: Disable WiMax 4G.

option

cert-chain-max

Maximum number of certificates that can be traversed in a certificate chain.

integer

Minimum value: 1 Maximum value: 2147483647

sslvpn-max-worker-count

Maximum number of SSL VPN processes. Upper limit for this value is the number of CPUs and depends on the model.

integer

Minimum value: 0 Maximum value: 40

sslvpn-kxp-hardware-acceleration

Enable/disable SSL VPN KXP hardware acceleration.
enable: Enable KXP SSL-VPN hardware acceleration.
disable: Disable KXP SSL-VPN hardware acceleration.

option

sslvpn-cipher-hardware-acceleration

Enable/disable SSL VPN hardware acceleration.
enable: Enable SSL-VPN cipher hardware acceleration.
disable: Disable SSL-VPN cipher hardware acceleration.

option

sslvpn-plugin-version-check

Enable/disable checking browser's plugin version by SSL VPN.
enable: Enable SSL-VPN automatic checking of browser plug-in version.
disable: Disable SSL-VPN automatic checking of browser plug-in version.

option

two-factor-ftk-expiry

FortiToken authentication session timeout (60 - 600 sec (10 minutes), default = 60).

integer

Minimum value: 60 Maximum value: 600

two-factor-email-expiry

Email-based two-factor authentication session timeout (30 - 300 seconds (5 minutes), default = 60).

integer

Minimum value: 30 Maximum value: 300

two-factor-sms-expiry

SMS-based two-factor authentication session timeout (30 - 300 sec, default = 60).

integer

Minimum value: 30 Maximum value: 300

two-factor-fac-expiry

FortiAuthenticator token authentication session timeout (10 - 3600 seconds (1 hour), default = 60).

integer

Minimum value: 10 Maximum value: 3600

two-factor-ftm-expiry

FortiToken Mobile session timeout (1 - 168 hours (7 days), default = 72).

integer

Minimum value: 1 Maximum value: 168

per-user-bwl

Enable/disable per-user black/white list filter.
enable: Enable per-user black/white list filter.
disable: Disable per-user black/white list filter.

option

wad-worker-count

Number of explicit proxy WAN optimization daemon (WAD) processes. By default WAN optimization, explicit proxy, and web caching is handled by all of the CPU cores in a FortiGate unit.

integer

Minimum value: 0 Maximum value: 40

wad-csvc-cs-count

Number of concurrent WAD-cache-service object-cache processes.

integer

Minimum value: 1 Maximum value: 1

wad-csvc-db-count

Number of concurrent WAD-cache-service byte-cache processes.

integer

Minimum value: 0 Maximum value: 40

wad-source-affinity

Enable/disable dispatching traffic to WAD workers based on source affinity.
disable: Disable dispatching traffic to WAD workers based on source affinity.
enable: Enable dispatching traffic to WAD workers based on source affinity.

option

wad-memory-change-granularity

Minimum percentage change in system memory usage detected by the wad daemon prior to adjusting TCP window size for any active connection.

integer

Minimum value: 5 Maximum value: 25

Enable/disable login time recording.
enable: Enable login time recording.
disable: Disable login time recording.

option

miglogd-children

Number of logging (miglogd) processes to be allowed to run. Higher number can reduce performance; lower number can slow log processing time. No logs will be dropped or lost if the number is changed.

integer

Minimum value: 0 Maximum value: 15

special-file-23-support

Enable/disable IPS detection of HIBUN format files when using Data Leak Protection.
disable: Disable using IPS detection of HIBUN format files when using Data Leak Protection.
enable: Enable using IPS detection of HIBUN format files when using Data Leak Protection.

option

log-uuid-policy

Enable/disable insertion of policy UUIDs to traffic logs.
enable: Enable insertion of policy UUID to traffic logs.
disable: Disable insertion of policy UUID to traffic logs.

option

log-uuid-address

Enable/disable insertion of address UUIDs to traffic logs.
enable: Enable insertion of address UUID to traffic logs.
disable: Disable insertion of address UUID to traffic logs.

option

log-ssl-connection

Enable/disable logging of SSL connection events.
enable: Enable logging of SSL connection events.
disable: Disable logging of SSL connection events.

option

arp-max-entry

Maximum number of dynamically learned MAC addresses that can be added to the ARP table (131072 - 2147483647, default = 131072).

integer

Minimum value: 131072 Maximum value: 2147483647

av-affinity

Affinity setting for AV scanning (hexadecimal value up to 256 bits in the format of xxxxxxxxxxxxxxxx).

string

Maximum length: 79

wad-affinity

Affinity setting for wad (hexadecimal value up to 256 bits in the format of xxxxxxxxxxxxxxxx).

string

Maximum length: 79

ips-affinity

Affinity setting for IPS (hexadecimal value up to 256 bits in the format of xxxxxxxxxxxxxxxx; allowed CPUs must be less than total number of IPS engine daemons).

string

Maximum length: 79

miglog-affinity

Affinity setting for logging (64-bit hexadecimal value in the format of xxxxxxxxxxxxxxxx).

string

Maximum length: 19

url-filter-affinity

URL filter CPU affinity.

string

Maximum length: 79

ndp-max-entry

Maximum number of NDP table entries (set to 65,536 or higher; if set to 0, kernel holds 65,536 entries).

integer

Minimum value: 65536 Maximum value: 2147483647

br-fdb-max-entry

Maximum number of bridge forwarding database (FDB) entries.

integer

Minimum value: 8192 Maximum value: 2147483647

max-route-cache-size

Maximum number of IP route cache entries (0 - 2147483647).

integer

Minimum value: 0 Maximum value: 2147483647

ipsec-asic-offload

Enable/disable ASIC offloading (hardware acceleration) for IPsec VPN traffic. Hardware acceleration can offload IPsec VPN sessions and accelerate encryption and decryption.
enable: Enable ASIC offload for IPsec VPN.
disable: Disable ASIC offload for IPsec VPN.

option

ipsec-soft-dec-async

Enable/disable software decryption asynchronization (using multiple CPUs to do decryption) for IPsec VPN traffic.
enable: Enable software decryption asynchronization for IPsec VPN.
disable: Disable software decryption asynchronization for IPsec VPN.

option

device-idle-timeout

Time in seconds that a device must be idle to automatically log the device user out. (30 - 31536000 sec (30 sec to 1 year), default = 300).

integer

Minimum value: 30 Maximum value: 31536000

device-identification-active-scan-delay

Number of seconds to passively scan a device before performing an active scan. (20 - 3600 sec, (20 sec to 1 hour), default = 90).

integer

Minimum value: 20 Maximum value: 3600

gui-device-latitude

Add the latitude of the location of this FortiGate to position it on the Threat Map.

string

Maximum length: 19

gui-device-longitude

Add the longitude of the location of this FortiGate to position it on the Threat Map.

string

Maximum length: 19

private-data-encryption

Enable/disable private data encryption using an AES 128-bit key.
disable: Disable private data encryption using an AES 128-bit key.
enable: Enable private data encryption using an AES 128-bit key.

option

auto-auth-extension-device

Enable/disable automatic authorization of dedicated Fortinet extension devices.
enable: Enable automatic authorization of dedicated Fortinet extension device globally.
disable: Disable automatic authorization of dedicated Fortinet extension device globally.

option

gui-theme

Color scheme for the administration GUI.
green: Green theme.
neutrino: Neutrino theme.
blue: Light blue theme.
melongene: Melongene theme (eggplant color).
mariner: Mariner theme (dark blue color).

option

gui-date-format

Default date format used throughout GUI.
yyyy/MM/dd: Year/Month/Day.
dd/MM/yyyy: Day/Month/Year.
MM/dd/yyyy: Month/Day/Year.
yyyy-MM-dd: Year-Month-Day.
dd-MM-yyyy: Day-Month-Year.
MM-dd-yyyy: Month-Day-Year.

option

gui-date-time-source

Source from which the FortiGate GUI uses to display date and time entries.
system: Use this FortiGate unit's configured timezone.
browser: Use the web browser's timezone.

option

igmp-state-limit

Maximum number of IGMP memberships (96 - 64000, default = 3200).

integer

Minimum value: 96 Maximum value: 128000

cloud-communication

Enable/disable all cloud communication.
enable: Allow cloud communication.
disable: Disable all cloud communication.

option

fec-port

Local UDP port for Forward Error Correction (49152 - 65535).

integer

Minimum value: 49152 Maximum value: 65535

fortitoken-cloud

Enable/disable FortiToken Cloud service.
enable: Enable FortiToken Cloud service.
disable: Disable FortiToken Cloud service.

option

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

CLI Reference

system global

Configure global attributes.

config system global

system global

Configure global attributes.

config system global