Fortinet black logo

CLI Reference

system sflow

Configure sFlow.

  config system sflow
      Description: Configure sFlow.
      set collector-ip {ipv4-address}
      set collector-port {integer}
      set source-ip {ipv4-address}
  end

config system sflow

Parameter Name Description Type Size
collector-ip IP address of the sFlow collector that sFlow agents added to interfaces in this VDOM send sFlow datagrams to (default = 0.0.0.0). ipv4-address Not Specified
collector-port UDP port number used for sending sFlow datagrams (configure only if required by your sFlow collector or your network configuration) (0 - 65535, default = 6343). integer Minimum value: 0 Maximum value: 65535
source-ip Source IP address for sFlow agent. ipv4-address Not Specified

Configure sFlow.

  config system sflow
      Description: Configure sFlow.
      set collector-ip {ipv4-address}
      set collector-port {integer}
      set source-ip {ipv4-address}
  end

config system sflow

Parameter Name Description Type Size
collector-ip IP address of the sFlow collector that sFlow agents added to interfaces in this VDOM send sFlow datagrams to (default = 0.0.0.0). ipv4-address Not Specified
collector-port UDP port number used for sending sFlow datagrams (configure only if required by your sFlow collector or your network configuration) (0 - 65535, default = 6343). integer Minimum value: 0 Maximum value: 65535
source-ip Source IP address for sFlow agent. ipv4-address Not Specified