Fortinet black logo

CLI Reference

wireless-controller hotspot20 h2qp-wan-metric

Configure WAN metrics.

  config wireless-controller hotspot20 h2qp-wan-metric
      Description: Configure WAN metrics.
      edit <name>
          set link-status [up|down|...]
          set symmetric-wan-link [symmetric|asymmetric]
          set link-at-capacity [enable|disable]
          set uplink-speed {integer}
          set downlink-speed {integer}
          set uplink-load {integer}
          set downlink-load {integer}
          set load-measurement-duration {integer}
      next
  end

config wireless-controller hotspot20 h2qp-wan-metric

Parameter Name Description Type Size
link-status Link status.
up: Link up.
down: Link down.
in-test: Link in test state.
option -
symmetric-wan-link WAN link symmetry.
symmetric: Symmetric WAN link (uplink and downlink speeds are the same).
asymmetric: Asymmetric WAN link (uplink and downlink speeds are not the same).
option -
link-at-capacity Link at capacity.
enable: Link at capacity (not allow additional mobile devices to associate).
disable: Link not at capacity (allow additional mobile devices to associate).
option -
uplink-speed Uplink speed (in kilobits/s). integer Minimum value: 0 Maximum value: 4294967295
downlink-speed Downlink speed (in kilobits/s). integer Minimum value: 0 Maximum value: 4294967295
uplink-load Uplink load. integer Minimum value: 0 Maximum value: 255
downlink-load Downlink load. integer Minimum value: 0 Maximum value: 255
load-measurement-duration Load measurement duration (in tenths of a second). integer Minimum value: 0 Maximum value: 65535

Configure WAN metrics.

  config wireless-controller hotspot20 h2qp-wan-metric
      Description: Configure WAN metrics.
      edit <name>
          set link-status [up|down|...]
          set symmetric-wan-link [symmetric|asymmetric]
          set link-at-capacity [enable|disable]
          set uplink-speed {integer}
          set downlink-speed {integer}
          set uplink-load {integer}
          set downlink-load {integer}
          set load-measurement-duration {integer}
      next
  end

config wireless-controller hotspot20 h2qp-wan-metric

Parameter Name Description Type Size
link-status Link status.
up: Link up.
down: Link down.
in-test: Link in test state.
option -
symmetric-wan-link WAN link symmetry.
symmetric: Symmetric WAN link (uplink and downlink speeds are the same).
asymmetric: Asymmetric WAN link (uplink and downlink speeds are not the same).
option -
link-at-capacity Link at capacity.
enable: Link at capacity (not allow additional mobile devices to associate).
disable: Link not at capacity (allow additional mobile devices to associate).
option -
uplink-speed Uplink speed (in kilobits/s). integer Minimum value: 0 Maximum value: 4294967295
downlink-speed Downlink speed (in kilobits/s). integer Minimum value: 0 Maximum value: 4294967295
uplink-load Uplink load. integer Minimum value: 0 Maximum value: 255
downlink-load Downlink load. integer Minimum value: 0 Maximum value: 255
load-measurement-duration Load measurement duration (in tenths of a second). integer Minimum value: 0 Maximum value: 65535