Add a new operator/carrier
An SIM map entry is used to get the carrier from the PLMN. Most PLMNs are supported in the default configuration. You can always check if your SIM PLMN is supported using the following command:
get extender lte-carrier-by-mcc-mnc <FEX SN> <MCC> <MNC>
If you cannot find the carrier of your SIM card, you can add a customized SIM using the following commands:
execute extender lte-simmap add <FEX SN> <MCC> <MNC> <Carrier_Name>
edit <carrier>
set mcc <first 3 digits of the IMSI number>
set mnc <next 2 digits the IMSI number>
set carrier <carrier name from the newly created carrier profile>
next
|
The new operator/carrier requires at least one matched carrier profile entry from |