Version:

Version:


Table of Contents

Admin Guide (Standalone)

Download PDF
Copy Link

Configure start session timeout

Caution

Generally, the "set session-dial-timeout 0" command has a default value of 0, meaning "disabled".

In some case, it may take time for the modem to establish a session, so you may need to set it to a larger value to ensure that the modem has enough time to connect.

To set up a timeout for start session:
 FX201E5919000035 (plan) # edit 1
    FX201E5919000035 (1) <M> # show
    edit 1
        set modem all
        set type by-default
        set apn
        set auth NONE
        set user
        set pwd
        set pdn ipv4-only
        set signal-threshold -100
        set signal-period 3600
        set capacity 0
        set monthly-fee 0
        set billing-date 1
        set overage disable
        set preferred-subnet 0
        set private-network disable
        set session-dial-timeout 0 <=== new, default is 0, means no special wait, keep the previous design. range": "0-180"
    next

    FX511F5919000000 # execute modem delete-sim-record modem1
    all delete all the IMSI for modem1
    imsi delete one IMSI for modem1

Configure start session timeout

Caution

Generally, the "set session-dial-timeout 0" command has a default value of 0, meaning "disabled".

In some case, it may take time for the modem to establish a session, so you may need to set it to a larger value to ensure that the modem has enough time to connect.

To set up a timeout for start session:
 FX201E5919000035 (plan) # edit 1
    FX201E5919000035 (1) <M> # show
    edit 1
        set modem all
        set type by-default
        set apn
        set auth NONE
        set user
        set pwd
        set pdn ipv4-only
        set signal-threshold -100
        set signal-period 3600
        set capacity 0
        set monthly-fee 0
        set billing-date 1
        set overage disable
        set preferred-subnet 0
        set private-network disable
        set session-dial-timeout 0 <=== new, default is 0, means no special wait, keep the previous design. range": "0-180"
    next

    FX511F5919000000 # execute modem delete-sim-record modem1
    all delete all the IMSI for modem1
    imsi delete one IMSI for modem1