Version:

Version:


Table of Contents

Admin Guide (Standalone)

Download PDF
Copy Link

Status, diagnostics, and debugging commands

FortiExtender (Standalone) supports the following CLI commands for system status checking, diagnostics, and debugging.

Task

CLI command/action

Check connectivity to FortiGate

get extender status

Check connectivity to FortiExtender (Standalone)Cloud

get cpm status

Check the status of modems

get modem status

Perform health checks and monitoring

get hmon hchk vwan.<vwan_member name>

(The member can be tunnel0 or tunnel1.)

Logs on telnet/ssh

execute debug log-to-console on

Perform modularized debugging

  1. Select the module.
  2. Turn the log level on/off as needed.

Debug

execute debug <module> <log level> on/off

 

SYSTEM,MONITORD, EXTD, MDMD, CONNMGR,NETD,CLI,GUI CPM,CONFIG,JCLI,HMON,IPSecD,FIREWALLD

Applicable log levels

error, info, dbg, fatal, warning, trace

Status, diagnostics, and debugging commands

FortiExtender (Standalone) supports the following CLI commands for system status checking, diagnostics, and debugging.

Task

CLI command/action

Check connectivity to FortiGate

get extender status

Check connectivity to FortiExtender (Standalone)Cloud

get cpm status

Check the status of modems

get modem status

Perform health checks and monitoring

get hmon hchk vwan.<vwan_member name>

(The member can be tunnel0 or tunnel1.)

Logs on telnet/ssh

execute debug log-to-console on

Perform modularized debugging

  1. Select the module.
  2. Turn the log level on/off as needed.

Debug

execute debug <module> <log level> on/off

 

SYSTEM,MONITORD, EXTD, MDMD, CONNMGR,NETD,CLI,GUI CPM,CONFIG,JCLI,HMON,IPSecD,FIREWALLD

Applicable log levels

error, info, dbg, fatal, warning, trace