Fortinet black logo

Admin Guide (Standalone)

Configure OSPF GUI

Copy Link
Copy Doc ID 5d87fec9-ac5b-11ec-9fd1-fa163e15d75b:539595
Download PDF

Configure OSPF GUI

Take the following general steps to configure OSPF from the FortiExtender GUI:

  1. Go to Router page.
  2. Create prefix list.
  3. Create route-map.
  4. Go to OSPF page:
  • For OSPF settings, enable status and add the router-id.
  • For OSPF Area, create Area "0.0.0.0 ".
  • For OSPF Network, create the network to add the network prefix.
  • For OSPF Interface, create the interface.
  • For OSPF Redistribute, add created the route-maps for redistributing the connected and static routes to the OSPF domain.

Refer to the illustrations below.

Configure OSPF GUI

Take the following general steps to configure OSPF from the FortiExtender GUI:

  1. Go to Router page.
  2. Create prefix list.
  3. Create route-map.
  4. Go to OSPF page:
  • For OSPF settings, enable status and add the router-id.
  • For OSPF Area, create Area "0.0.0.0 ".
  • For OSPF Network, create the network to add the network prefix.
  • For OSPF Interface, create the interface.
  • For OSPF Redistribute, add created the route-maps for redistributing the connected and static routes to the OSPF domain.

Refer to the illustrations below.