IPsec VPN Wizard
For each device, the SD-WAN pane includes access to an IPsec VPN Wizard. You can use the wizard to create IPsec VPN tunnels and automatically generate interface members for the tunnel.
To configure the IPsec VPN in SD-WAN:
- Go to the device database. See Displaying the device database.
- In the device database, go to Network > SD-WAN.
The SD-WAN pane opens.
- In the Interface Members section, click Create VPN.
The Create IPsec VPN for SD-WAN dialog box is displayed.
- Configure the following settings, and click OK to generate IPsec VPNs:
Name
Specify a name for the VPN.
Remote Device
Select IP Address or Dynamic DNS.
IP Address
Specify the IP address if IP Address is selected for Remote Device.
FQDN
Specify the FQDN if Dynamic DNS is selected for Remote Device.
Outgoing Interface
Select the outgoing interface.
Authentication Method
Select Pre-shared key or Signature.
Certificate Name
Select the certificate (if Signature was selected as the Authentication Method)
Peer Certificate CA
Select the Peer Certificate CA (if Signature was selected as the Authentication Method)
Pre-shared Key
Select the pre-shared key (if Pre-shared key was selected as the Authentication Method)
The auto-generated VPN interface is automatically added to the list of SD-WAN interface members.
- Edit the VPN in Interface Members to configure Gateway IP, Estimated Upstream Bandwidth (Kbps), and Estimated Downstream Bandwidth (Kbps).
- Click Apply to save the SD-WAN settings.