Verifying VPN template and tunnel status
To verify the template installation status:
-
Go to Device Manager > Device & Groups. The list of Managed FortiGate devices is displayed.
-
Verify that Config Status, Policy Package Status, and Provisioning Templates all display a green checkmark to indicate that the configuration is synchronized between FortiManager and FortiGate.
To verify the VPN tunnel status:
-
Go to Device Manager > Monitors > VPN Monitor. A map displays.
-
Enable Show Table to display the table of tunnels below the map.
-
Verify that the Status is Up for each tunnel.
The devices are missing in this image due to the WAN IP addresses used. Because they are not public addresses (TEST-NET-2 and TEST-NET-3 are used, see RFC 5737), FortiManager cannot place them on the map.