Adding a multi VDOM

The Multi VDOM mode allows you to create multiple VDOMs as per your license.

To add a Multi VDOM to a FortiGate device:

1. Go to Device Manager > Device & Groups.
2. In the toolbar, select Table View from the dropdown menu.
3. In the tree menu, click the group. The devices in the group are displayed in the content pane.
4. In the content pane, right-click a device and select Add VDOM.
5. Click Multi VDOM
6. The Create New Virtual Domain window opens.

   

7. Configure the following options, and click OK.

   VDOM Name	Type a name for the new virtual domain.
   Description	Optionally, enter a description of the VDOM.
   Enable	Select to enable the VDOM.
   Central SNAT	Toggle ON to enable, and toggle OFF to disable.
   Operation Mode	Select either NAT or Transparent.
   NGFW Mode	Select either Profile-based or Policy-based.
   Interface Members	Click to select each port one by one.
   Management IP Address 1 / 2	Type the management IP addresses and network masks for the VDOM. This setting is only available when Operation Mode is Transparent.
   Gateway	Type the gateway IP address. This setting is only available when Operation Mode is Transparent.

Kubernetes Service must be enabled on the server side for AWS, Azure, OCI and, GCP for Kubernetes to function for the particular cloud platform. Once the service is enabled, Kubernetes can be configured for the particular cloud platform in FortiManager.