Adding SSID per-device mapping
To add SSID per-device mapping:
- Click Create New in the per-device mapping toolbar. The Per-Device Mapping dialog-box opens.
Configure the following settings and click OK.
|
Mapped Device |
Select the device to be mapped from the drop-down. |
|
|
Mapped IP/NetMask |
Specify the Mapped IP/NetMask. |
|
|
Mapped DHCP Server |
Set the DHCP Server to ON if you want to map a DHCP Server to this device. |
|
|
|
Address Range |
Configure address ranges for DHCP. Click Create to create a new range. Ranges can also be edited and deleted as required. This option is only available when DHCP Server is ON and Mode is Server. |
|
|
Netmask |
Enter the netmask. This option is only available when DHCP Server is ON and Mode is Server. |
|
|
Default Gateway |
Configure the default gateway: Same as Interface IP, or Specify. If set to Specify, enter the gateway IP address in the field. This option is only available when DHCP Server is ON and Mode is Server. |
|
|
DNS Server |
Configure the DNS server: Same as System DNS, Same as Interface IP, or Specify. This option is only available when DHCP Server is ON and Mode is Server. |
|
|
Mode |
Select the DHCP mode: Server or Relay. This option is only available when DHCP Server is ON. |
|
|
NTP Server |
Configure the NTP server: Local, Same as System NTP, or Specify. If set to Specify, enter the NTP server IP address in the field. This option is only available when DHCP Server is ON and Mode is Server. |
|
|
Time Zone |
Configure the timezone: Disable, Same as System, or Specify. If set to Specify, select the timezone from the dropdown list. This option is only available when DHCP Server is ON and Mode is Server. |
|
|
Next Bootstrap Server |
Enter the IP address of the next bootstrap server. This option is only available when DHCP Server is ON and Mode is Server. |
|
|
Additional DHCP Options |
In the Lease Time field, enter the lease time, in seconds (default = 604800 (7 days)). Add DHCP options to the table. For details, see Adding additional DHCP options. Options can also be edited and deleted as required. This option is only available when DHCP Server is ON and Mode is Server. |
|
|
MAC Reservation + Access Control |
Select the action to take with unknown MAC addresses: assign or block. Add MAC address actions to the table. For details, see Adding a MAC address reservation. Reservations can also be edited and deleted as required. This option is only available when DHCP Server is ON and Mode is Server. |
|
|
DHCP Server IP |
Enter the DHCP server IP address. This option is only available when DHCP Server is ON and Mode is Relay. |
|
|
Type |
Select the type: Regular, or IPsec. This option is only available when DHCP Server is ON. |