Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Products Best Practices Hardware Guides Products A-Z
Summary
By Solution
By 4D Pillars
By Cloud
Secure Networking
Unified SASE
Security Operations
Secure SD-WAN
Secure Access Service Edge (SASE)
ZTNA
LAN Edge
Identity and Access Management
Next Generation Firewall
Public Cloud
Private Cloud
FortiCloud
Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
    • More >>
    Unified SASE
  • Single Vendor SASE
  • Cloud Network Security
  • Secure Endpoint Connectivity
  • Web Application / API Protection
    • More >>
    Security Operations
  • Security Operations Automation
  • Identity
  • Early Detection & Prevention
    • More >>
    Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
  • Communication & Surveillance
    • Unified SASE
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Cloud Network Security
  • Cloud-Native Security
  • Web Application / API Protection
    • Security Operations
  • Security Operations Automation
  • Endpoint
  • Data Protection
  • Identity
  • Email
  • Early Detection & Prevention
  • Expert Services
  • Edge Firewall
  • Orchestration & management
  • SD Branch
  • Application Delivery
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Secure Private Access
  • Thin Edge
  • Identity
  • Application Gateway
  • Enterprise Asset Management
  • Endpoint Agent
  • Agentless Security Posture
  • Identity
  • Wireless
  • Switching
  • Identity
  • Privilege Acccess Management
  • Next Generation Firewall
  • Orchestration & management
  • Expert Services
  • All
  • All
  • Account Management
  • SAAS Management
  • SAAS Application Security
  • Managed Services
  • Platform as a service (PAAS)
  • Other SAAS Services
    • 4D Resources
    Solution Hubs
  • 4D Pillars
  • Cloud
  • Popular Solutions

    • Administration Guide

    Home FortiManager 6.4.0 Administration Guide
    6.4.0
    7.6.1
    7.6.0
    7.4.5
    7.4.4
    7.4.3
    7.4.2
    7.4.1
    7.4.0
    7.2.8
    7.2.7
    7.2.6
    7.2.5
    7.2.4
    7.2.3
    7.2.2
    7.2.1
    7.2.0
    7.0.13
    7.0.12
    7.0.11
    7.0.10
    7.0.9
    7.0.8
    7.0.7
    7.0.6
    7.0.5
    7.0.4
    7.0.3
    7.0.2
    7.0.1
    7.0.0
    6.4.15
    6.4.14
    6.4.13
    6.4.12
    6.4.11
    6.4.10
    6.4.9
    6.4.8
    6.4.7
    6.4.6
    6.4.5
    6.4.4
    6.4.3
    6.4.2
    6.4.1
    6.4.0
    6.2.13
    6.2.12
    6.2.11
    6.2.10
    6.2.9
    6.2.8
    6.2.7
    6.2.6
    6.2.6
    6.2.5
    6.2.3
    6.2.2
    6.2.1
    6.2.0
    6.0.12
    6.0.11
    6.0.10
    6.0.9
    6.0.8
    6.0.7
    6.0.6
    6.0.5
    6.0.4
    6.0.3
    6.0.2
    6.0.1
    6.0.0
    5.6.11
    5.6.10
    5.6.9
    5.6.8
    5.6.7
    5.6.6
    5.6.5
    5.6.4
    5.6.3
    5.6.2
    5.6.1
    5.6.0
    5.4.7
    5.4.6
    5.4.5
    5.4.4
    5.4.3
    5.4.2
    5.4.1
    5.4.0
    5.2.10
    5.2.7
    5.2.6
    5.2.4
    5.2.3
    5.2.2
    5.2.1
    5.2.0
    5.0.12
    5.0.11
    5.0.10
    5.0.9
    5.0.8
    5.0.7
    5.0.6
    5.0.5
    5.0.4
    5.0.3
    5.0.2
    4.3.8
    4.3.7
    4.3.6
    4.3.5
    4.3.4
    4.3.3
    4.3.2
    4.3.1
    4.3.0
    4.2.9
    4.2.8
    4.2.7
    4.2.6
    4.2.5
    4.2.4
    4.2.3
    4.2.2
    4.2.1
    4.2.0
    4.1.0
    4.0.3
    4.0.2
    4.0.1
    4.0.0

    High Availability

    High Availability

    FortiManager high availability (HA) provides a solution for a key requirement of critical enterprise management and networking components: enhanced reliability. Understanding what’s required for FortiManager reliability begins with understanding what normal FortiManager operations are and how to make sure normal operations continue if a FortiManager unit fails.

    Most of the FortiManager operations involve storing FortiManager and FortiGate configuration and related information in the FortiManager database on the FortiManager unit hard disk. A key way to enhance reliability of FortiManager is to protect the data in the FortiManager database from being lost if the FortiManager unit fails. This can be achieved by dynamically backing up FortiManager database changes to one or more backup FortiManager units. Then, if the operating FortiManager unit fails, a backup FortiManager unit can take the place of the failed unit.

    A FortiManager HA cluster can have a maximum of four units: one primary unit with up to three backup or secondary units. All units in the cluster must be of the same FortiManager series. All units are visible on the network.

    The primary unit and the backup units can be in the same location or different locations. FortiManager HA supports geographic redundancy so the primary unit and backup units can be in different locations attached to different networks as long as communication is possible between them (for example, on the Internet, on a WAN, or in a private network).

    Administrators connect to the primary unit GUI or CLI to perform FortiManager operations. Managed devices connect with the primary unit for normal management operations (configuration push, auto-update, firmware upgrade, and so on). If FortiManager is used to distribute FortiGuard updates to managed devices, managed devices can connect to the primary FortiManager unit or one of the backup units.

    If the primary FortiManager unit fails you must manually configure one of the backup units to become the primary unit. The new primary unit will keep its IP address. FortiManager's IP address registered on FortiGate will be automatically changed when new primary unit is selected.

    You don't need to reboot the FortiManager device when it is promoted from a backup to the primary unit.
    Note

    When FortiManager Primary and Secondary units both have FortiAnalyzer features enabled on them, all the FortiAnalyzer features available on the Primary unit are also available on the Secondary unit.

    When devices with different licenses are used to create an HA cluster, the license that allows for the smallest number of managed devices is used.
    Previous
    Next

    High Availability

    High Availability

    FortiManager high availability (HA) provides a solution for a key requirement of critical enterprise management and networking components: enhanced reliability. Understanding what’s required for FortiManager reliability begins with understanding what normal FortiManager operations are and how to make sure normal operations continue if a FortiManager unit fails.

    Most of the FortiManager operations involve storing FortiManager and FortiGate configuration and related information in the FortiManager database on the FortiManager unit hard disk. A key way to enhance reliability of FortiManager is to protect the data in the FortiManager database from being lost if the FortiManager unit fails. This can be achieved by dynamically backing up FortiManager database changes to one or more backup FortiManager units. Then, if the operating FortiManager unit fails, a backup FortiManager unit can take the place of the failed unit.

    A FortiManager HA cluster can have a maximum of four units: one primary unit with up to three backup or secondary units. All units in the cluster must be of the same FortiManager series. All units are visible on the network.

    The primary unit and the backup units can be in the same location or different locations. FortiManager HA supports geographic redundancy so the primary unit and backup units can be in different locations attached to different networks as long as communication is possible between them (for example, on the Internet, on a WAN, or in a private network).

    Administrators connect to the primary unit GUI or CLI to perform FortiManager operations. Managed devices connect with the primary unit for normal management operations (configuration push, auto-update, firmware upgrade, and so on). If FortiManager is used to distribute FortiGuard updates to managed devices, managed devices can connect to the primary FortiManager unit or one of the backup units.

    If the primary FortiManager unit fails you must manually configure one of the backup units to become the primary unit. The new primary unit will keep its IP address. FortiManager's IP address registered on FortiGate will be automatically changed when new primary unit is selected.

    You don't need to reboot the FortiManager device when it is promoted from a backup to the primary unit.
    Note

    When FortiManager Primary and Secondary units both have FortiAnalyzer features enabled on them, all the FortiAnalyzer features available on the Primary unit are also available on the Secondary unit.

    When devices with different licenses are used to create an HA cluster, the license that allows for the smallest number of managed devices is used.
    Previous
    Next